OLD MODEL STEAM BOATS IN POOR CONDITION

Uploaded January 2026 | Updated September 2026, 1 week ago

Old Model Steam Boats In Poor Condition - Part #15. This boat is not an open launch type it is a Steam Ship model. The Boiler's Safety Valve needs to exhaust outside the boat. Initially I fitted a Pipe Union Connector to the Stuart Safety Valve in order to pipe the steam out of the way but this was a fail. I used a better method followed by making some Boiler Bands. I show the newly Silver Soldered Chimney Extension Tube and make a special pipe fitting to connect the Condenser to the Chimney. patreon.com/keithappleton
IF YOU ENJOY WATCHING THESE DETAILED TUTORIAL VIDEOS THAT I PRODUCE TO HELP BEGINNERS TO THE HOBBY, THEN PLEASE BECOME A PATRON OF MY YOUTUBE CHANNEL VIA "PATREON" AND ALLOW ME THE TIME TO MAKE EVEN MORE OF THESE SPECIALIST AND HIGHLY DETAILED TUTORIAL VIDEOS. AS A PATREON SUPPORTER YOU ARE ABLE TO ACCESS MANY OF MY VIDEOS THAT ARE NOT FOR PUBLIC VIEW ON YOUTUBE.
PLEASE VISIT MY WEBSITE FOR THE VERY EASY TO USE COMPREHENSIVE PLAYLIST INDEX OF ALL OF MY YOUTUBE VIDEOS:
mainsteam.co.uk
OR CLICK HERE FOR PATREON:
patreon.com/keithappleton
Please become a member of my Youtube Channel to get access to extra videos:
youtube.com/channel/UCgeQiJg-PIH5MZQn0aRd1mg/join

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #16

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #8

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #12

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #28

RENOVATING A STUART NUMBER 4 STEAM ENGINE - PART #3

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #42

IMPROVING MY 5 INCH GAUGE LION LOCOMOTIVE - PART #3

A PARTIAL REBUILD OF A STUART 10V - PART #3

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #37

AN OLD OPEN STEAM POND LAUNCH IN POOR CONDITION - PART #6