AN OLD STEAM POND LAUNCH IN POOR CONDITION

Uploaded April 2026 | Updated September 2026, 2 weeks ago

An Old Steam Pond Launch In Poor Condition - Part #12. The inside of the Hull of this old boat is very dirty and the first job is to clean it. This was followed by re-gluing the top decking using Cyanoacrylate Adhesive. A quick look at the propeller shaft and then moving on to the rudder. This needs considerable work to make it run true and smoothly. Finally after making a new Rudder Stern Tube I remove the rear seating. patreon.com/keithappleton
IF YOU ENJOY WATCHING THESE DETAILED TUTORIAL VIDEOS THAT I PRODUCE TO HELP BEGINNERS TO THE HOBBY, THEN PLEASE BECOME A PATRON OF MY YOUTUBE CHANNEL VIA "PATREON" AND ALLOW ME THE TIME TO MAKE EVEN MORE OF THESE SPECIALIST AND HIGHLY DETAILED TUTORIAL VIDEOS. AS A PATREON SUPPORTER YOU ARE ABLE TO ACCESS MANY OF MY VIDEOS THAT ARE NOT FOR PUBLIC VIEW ON YOUTUBE.
PLEASE VISIT MY WEBSITE FOR THE VERY EASY TO USE COMPREHENSIVE PLAYLIST INDEX OF ALL OF MY YOUTUBE VIDEOS:
mainsteam.co.uk
OR CLICK HERE FOR PATREON:
patreon.com/keithappleton
Please become a member of my Youtube Channel to get access to extra videos:
youtube.com/channel/UCgeQiJg-PIH5MZQn0aRd1mg/join

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #28

RENOVATING A STUART NUMBER 4 STEAM ENGINE - PART #3

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #42

IMPROVING MY 5 INCH GAUGE LION LOCOMOTIVE - PART #3

A PARTIAL REBUILD OF A STUART 10V - PART #3

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #37

AN OLD OPEN STEAM POND LAUNCH IN POOR CONDITION - PART #6

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #9

HOW TO BUILD A STUART MODELS DYNAMO - PART #2

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #12