Uploaded April 2016 | Updated September 2026, 2 hours ago
If you found this video helpful, you can buy me a BEER!
buymeacoffee.com/motorcycleboss
Business Inquiries Contact:
TheMotorcycleBoss@gmail.com
2005 Kawasaki Ninja 636. I will show you how to properly prep and replace a stator cover gasket on nearly all sportbikes. This applies to pulsar covers, clutch covers, and so on. Off-camera I also used 1000 grit sand-paper to smooth the surface of the cover.
RTV Silicone I use:
amzn.to/2myvhPY
If you cannot get ahold of a factory gasket, use this:
amzn.to/2mxi0Hl
Gasket scraper:
amzn.to/2nuNYUD
Spinner T-handle: Must Buy!!
3/8 drive: amzn.to/2mx3pvz
Torque Wrench I use:
amzn.to/2mys8zE
Nitrile Gloves (no latex):
amzn.to/2SHM9Ao
Oil Pan:
amzn.to/2SEXYHd
Go get yourself a factory service manual!!
Facebook Page:
facebook.com/themotorcycleboss
BikeTender:
youtube.com/user/topuremeleeRS
(I am an Amazon Associate)
If you found this video helpful, you can buy me a BEER!
buymeacoffee.com/motorcycleboss
Business Inquiries Contact:
TheMotorcycleBoss@gmail.com
2005 Kawasaki Ninja 636. I will show you how to properly prep and replace a stator cover gasket on nearly all sportbikes. This applies to pulsar covers, clutch covers, and so on. Off-camera I also used 1000 grit sand-paper to smooth the surface of the cover.
RTV Silicone I use:
amzn.to/2myvhPY
If you cannot get ahold of a factory gasket, use this:
amzn.to/2mxi0Hl
Gasket scraper:
amzn.to/2nuNYUD
Spinner T-handle: Must Buy!!
3/8 drive: amzn.to/2mx3pvz
Torque Wrench I use:
amzn.to/2mys8zE
Nitrile Gloves (no latex):
amzn.to/2SHM9Ao
Oil Pan:
amzn.to/2SEXYHd
Go get yourself a factory service manual!!
Facebook Page:
facebook.com/themotorcycleboss
BikeTender:
youtube.com/user/topuremeleeRS
(I am an Amazon Associate)
