Uploaded November 2024 | Updated September 2026, 1 week ago
🎯 Simplistic RC Design: The video showcases a straightforward remote-controlled (RC) plane design called the "NutBall," featuring only rudder and elevator controls with no ailerons. The design aims to simplify assembly and operation.
🛠️ Construction Details: Instructions include cutting the foam board, reinforcing with tape and ribs, and attaching components such as landing gear, servos, and a motor mount. Key materials include a 2204 2300KV motor and a 2S or 3S battery.
✈️ Performance Overview: The NutBall exhibits excellent maneuverability, emphasizing its fun and user-friendly characteristics, even with a simple control setup.
🔋 Weight and Power Insights: With a total weight of about 200g, including battery, the design optimizes lightweight materials to maintain performance while evading excessive regulation.
🎨 Creative Finish: The plane is styled whimsically, inspired by "Wacky Races," featuring unique graphics and a playful theme.
🔗 Please tell me if any of the links provided no longer work!!
🛒 2204 2300KV Brushless Motor https://s.click.aliexpress.com/e/_DcGMUz3
🛒 GNB 1100mAh HV Battery https://s.click.aliexpress.com/e/_DdBhE2N
🛒 GH-S37A 3.7g Servo Mini Servo https://s.click.aliexpress.com/e/_DmACmTd
🛒 EMAX Simonk Series 12A 30A ESC 2-3S LiPo https://s.click.aliexpress.com/e/_De3L9vl
🛒 3-blade Propeller https://s.click.aliexpress.com/e/_DlNrsNF
🛒 Mateksys ELRS-R24-P ELRS 2.4GHz Receiver https://s.click.aliexpress.com/e/_DcvA2q9
🔗 I used the plan in post # 16 here : rcgroups.com/forums/showthread.php?836389-The-NutBall-best-damn-RET-foamy-yet/page216
🔗 The motor mount : thingiverse.com/thing:2067922
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
Introductory remarks on simplifying design - 0:00
Marking rudder and elevator positions - 0:32
Reinforcing ribs and motor mount installation - 1:02
Attaching landing gear and servo details - 1:34
Weight calculation and battery installation - 2:04
Motor positioning and balance adjustment - 2:36
Artistic inspiration and graphic addition - 5:13
First flight attempt - 6:15
Fine-tuning control throws - 7:22
Successful flight and final comments - 9:25
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
🎯 Simplistic RC Design: The video showcases a straightforward remote-controlled (RC) plane design called the "NutBall," featuring only rudder and elevator controls with no ailerons. The design aims to simplify assembly and operation.
🛠️ Construction Details: Instructions include cutting the foam board, reinforcing with tape and ribs, and attaching components such as landing gear, servos, and a motor mount. Key materials include a 2204 2300KV motor and a 2S or 3S battery.
✈️ Performance Overview: The NutBall exhibits excellent maneuverability, emphasizing its fun and user-friendly characteristics, even with a simple control setup.
🔋 Weight and Power Insights: With a total weight of about 200g, including battery, the design optimizes lightweight materials to maintain performance while evading excessive regulation.
🎨 Creative Finish: The plane is styled whimsically, inspired by "Wacky Races," featuring unique graphics and a playful theme.
🔗 Please tell me if any of the links provided no longer work!!
🛒 2204 2300KV Brushless Motor https://s.click.aliexpress.com/e/_DcGMUz3
🛒 GNB 1100mAh HV Battery https://s.click.aliexpress.com/e/_DdBhE2N
🛒 GH-S37A 3.7g Servo Mini Servo https://s.click.aliexpress.com/e/_DmACmTd
🛒 EMAX Simonk Series 12A 30A ESC 2-3S LiPo https://s.click.aliexpress.com/e/_De3L9vl
🛒 3-blade Propeller https://s.click.aliexpress.com/e/_DlNrsNF
🛒 Mateksys ELRS-R24-P ELRS 2.4GHz Receiver https://s.click.aliexpress.com/e/_DcvA2q9
🔗 I used the plan in post # 16 here : rcgroups.com/forums/showthread.php?836389-The-NutBall-best-damn-RET-foamy-yet/page216
🔗 The motor mount : thingiverse.com/thing:2067922
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
Introductory remarks on simplifying design - 0:00
Marking rudder and elevator positions - 0:32
Reinforcing ribs and motor mount installation - 1:02
Attaching landing gear and servo details - 1:34
Weight calculation and battery installation - 2:04
Motor positioning and balance adjustment - 2:36
Artistic inspiration and graphic addition - 5:13
First flight attempt - 6:15
Fine-tuning control throws - 7:22
Successful flight and final comments - 9:25
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
