No Sanding Needed Finish on CNC Tray @ToolsToday
No Sanding Needed Finish on CNC Tray  @ToolsToday
Uploaded May 2026 | Updated November 2026, 1 day ago
Dishing out a catch all tray on the Stepcraft M.1000 CNC machine using the Amana Tool item 45982 3/4" diameter bowl bit all linked below. This bit left such a clean cut that I will have to do zero sanding on the inside of the tray before adding finish! Check out the tools used on our website -

Amana Tool 45982 Carbide Tipped Bowl & Tray 1/4 R x 3/4 D x 5/8 CH x 1/4 Inch SHK Router Bit
toolstoday.com/v-5662-45982.html

RPM: 18,000
Feed Rate: 80ipm
Plunge Rate: 30ipm
Depth per pass: .15"

STEPCRAFT M.1000 36 x 48” CNC Machine toolstoday.com/stepcraft-m-1000-cnc-system.html

Vectric Software for CNC toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html

Check out the plans for this project - toolstoday.com/sunflower-catch-all-tray-cnc-plans-downloadable-and-customizable.html

#short #shorts

** Subscribe - youtube.com/user/toolstoday

** Shop the website - toolstoday.com
No Sanding Needed Finish on CNC TrayThis CNC Pumpkin Reveal Is So SatisfyingSpeed Cutting Cabinet PartsCarving and Filling NameSpray Gun Cleanup Isn’t the Problem… You’re Doing It WrongA Budget Friendly Way to Break Down PlywoodUnboxing Jet Smart Drill PressBig Chips, Smooth HoleCutting Leather with a CNC MachineCarving Pumpkin Tray With CNCWhy Your CNC Cuts Are Chipping OutFlush Trimming Corner Radius
ToolsToday |

No Sanding Needed Finish on CNC Tray

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER