Uploaded June 2023 | Updated November 2026, 16 hours ago
Technology Story #1 (Durability). It takes an incredible amount of design and engineering to come up with a design this simple. And in it's simplicity lies the beauty. The valve is actuated with a coil that is built into the body. When energized, three tiny stainless steel balls move up and down, allowing air to flow. That's it. It is that simple. And because of this, the valve is rated to last 5 Billion Cycles. And regardless of how the calculations are done, the valve will last years, not months.
Technology Story #2 (Performance). The performance of this valve builds off the simple design, which allows the valve to cycle significantly faster than other alternatives. This fast cycling allows multiple pulses of air to be released during a single stroke of the Bodymaker and Cupper. For the Bodymaker specifically, these pulses act in the same way an impact wrench or air hammer work, allowing it to help strip the can off the punch.
Technology Story #3 (Air Savings). Because the valve is able to cycle so quickly, with multiple pulses per stroke of the Bodymaker or Cupper, the time the valve is not actuated results in air savings. For Cupper this is especially important because most Cuppers turn their strip air always-on once they reach a certain speed. Imagine the air savings from always on, to cycling (only using air when needed).
Technology Story #4 (Sustainability). Air savings is important, but just as important is the electricity savings resulting from not using as much compressed air. If the can manufacturing industry is going to make good on the sustainability promises it is making the world, it needs technologies like this.
For more information: https://www.intpacsol.com/products/ai... sales-service@intpacsol.com +1 (303) 426-4881
Technology Story #1 (Durability). It takes an incredible amount of design and engineering to come up with a design this simple. And in it's simplicity lies the beauty. The valve is actuated with a coil that is built into the body. When energized, three tiny stainless steel balls move up and down, allowing air to flow. That's it. It is that simple. And because of this, the valve is rated to last 5 Billion Cycles. And regardless of how the calculations are done, the valve will last years, not months.
Technology Story #2 (Performance). The performance of this valve builds off the simple design, which allows the valve to cycle significantly faster than other alternatives. This fast cycling allows multiple pulses of air to be released during a single stroke of the Bodymaker and Cupper. For the Bodymaker specifically, these pulses act in the same way an impact wrench or air hammer work, allowing it to help strip the can off the punch.
Technology Story #3 (Air Savings). Because the valve is able to cycle so quickly, with multiple pulses per stroke of the Bodymaker or Cupper, the time the valve is not actuated results in air savings. For Cupper this is especially important because most Cuppers turn their strip air always-on once they reach a certain speed. Imagine the air savings from always on, to cycling (only using air when needed).
Technology Story #4 (Sustainability). Air savings is important, but just as important is the electricity savings resulting from not using as much compressed air. If the can manufacturing industry is going to make good on the sustainability promises it is making the world, it needs technologies like this.
For more information: https://www.intpacsol.com/products/ai... sales-service@intpacsol.com +1 (303) 426-4881










