2-Piece D&I Can Design - Old vs. New @IPSCanmaking
2-Piece D&I Can Design - Old vs. New  @IPSCanmaking
Uploaded August 2023 | Updated November 2026, 4 hours ago
Cans have come a long way since they were originally invented. Comparing modern can design to that of a 7oz Coors can from the late 60's / early 70's, there is a lot to notice.

1) Old cans didn't have necks, which meant the can making process didn't use a Necker!

2) Domes on older cans were much more simple, as they relied on thicker metal to resist dome reversal. Modern cans require much more engineering and design as they use thinner metal.

3) This particular can used a UV cure process for the decoration, compared to modern cans that use thermal cure.

4) Can walls of older cans were the same thickness from bottom to top, where modern cans have a distinct transition near the top of the can that allows thicker metal to be used to neck the can, and thinner metal where it is not needed.

Can design has come a long way! Interested in learning more about can manufacturing and the technologies used in modern can plants? Visit our website or reach out to us at the information below....

Integrated Packaging Solutions intpacsol.com +1(303)426-4881 sales-service@intpacsol.com
2-Piece D&I Can Design - Old vs. NewCans Are Cool (What Does a Vision Inspection System Do?)Altek Pop Tear Tester - Demonstration VideoVacuum InverterCans Are Cool (What Happens in a Base Reformer?)IPS CanSCHOOL Spotlight: Purpose of a BodymakerCanSCHOOL Spotlight: Purpose of an AutobaggerIPS RevolveTWIST, in partnership with CanlineUserLOG -  X2 Cross Hatch Machine Access ControlCans Are Cool: Engineering Behind the Aluminum Beverage CanCans Are Cool: Before During and After DecoratingPin Stripper
IPSCanmaking |

2-Piece D&I Can Design - Old vs. New

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER