![NEJE Master 2S plus laser engraver & cutter with 30w N40630 [unbox, Review, compare] @TinC33](https://i.ytimg.com/vi/PMq-lsqk8YE/maxresdefault.jpg)
Uploaded July 2021 | Updated September 2026, 2 weeks ago
Hy There,
In this wideo i will review another neje machine, it's Neje master 2S PLUS
after some testing i can easily say it's one of my favorite model, because it's cost just a bit more than neje 2 and offer much bigger working area, wich is amazing 255 x 420mm and even can be extended for aditional 20mm by Y axis.
if you want to se more details check my video about neje 2 wich is almost same machine, only smaller.
You can buy Neje PLUS here:
30W version:
shrsl.com/335zb
40W version:
shrsl.com/335zr
40w modul:
shrsl.com/2y2km
All products from neje store:
shrsl.com/2y2ko
Neje on banggood:
banggood.com/custlink/GvvRSCVoPm
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
My other neje videos
Neje 40W laser modul:
youtube.com/watch?v=QrtGMzzSWDo
Neje max:
youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
youtube.com/watch?v=YoYEFVLAzy0
Links to stl files for mounting plate:
thingiverse.com/thing:4835350
and air assist for 30/40w modul:
thingiverse.com/thing:4835361
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Burnt - Cushy
2: ES_NDA - Blue Steel
3: ES_Murder Your TV - _91nova
4: ES_Ember Rain - Ballpoint
5: ES_Ante Up - Blue Steel
6:ES_Gill Bates - _91nova
Hy There,
In this wideo i will review another neje machine, it's Neje master 2S PLUS
after some testing i can easily say it's one of my favorite model, because it's cost just a bit more than neje 2 and offer much bigger working area, wich is amazing 255 x 420mm and even can be extended for aditional 20mm by Y axis.
if you want to se more details check my video about neje 2 wich is almost same machine, only smaller.
You can buy Neje PLUS here:
30W version:
shrsl.com/335zb
40W version:
shrsl.com/335zr
40w modul:
shrsl.com/2y2km
All products from neje store:
shrsl.com/2y2ko
Neje on banggood:
banggood.com/custlink/GvvRSCVoPm
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
My other neje videos
Neje 40W laser modul:
youtube.com/watch?v=QrtGMzzSWDo
Neje max:
youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
youtube.com/watch?v=YoYEFVLAzy0
Links to stl files for mounting plate:
thingiverse.com/thing:4835350
and air assist for 30/40w modul:
thingiverse.com/thing:4835361
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Burnt - Cushy
2: ES_NDA - Blue Steel
3: ES_Murder Your TV - _91nova
4: ES_Ember Rain - Ballpoint
5: ES_Ante Up - Blue Steel
6:ES_Gill Bates - _91nova
![NEJE Master 2S plus laser engraver & cutter with 30w N40630 [unbox, Review, compare]](https://i.ytimg.com/vi/PMq-lsqk8YE/mqdefault.jpg "NEJE Master 2S plus laser engraver & cutter with 30w N40630 [unbox, Review, compare]
Hy There,
In this wideo i will review another neje machine, its Neje master 2S PLUS
after some testing i can easily say its one of my favorite model, because its cost just a bit more than neje 2 and offer much bigger working area, wich is amazing 255 x 420mm and even can be extended for aditional 20mm by Y axis.
if you want to se more details check my video about neje 2 wich is almost same machine, only smaller.
You can buy Neje PLUS here:
30W version:
https://shrsl.com/335zb
40W version:
https://shrsl.com/335zr
40w modul:
https://shrsl.com/2y2km
All products from neje store:
https://shrsl.com/2y2ko
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
My other neje videos
Neje 40W laser modul:
https://www.youtube.com/watch?v=QrtGMzzSWDo
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
Links to stl files for mounting plate:
https://www.thingiverse.com/thing:4835350
and air assist for 30/40w modul:
https://www.thingiverse.com/thing:4835361
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Burnt - Cushy
2: ES_NDA - Blue Steel
3: ES_Murder Your TV - _91nova
4: ES_Ember Rain - Ballpoint
5: ES_Ante Up - Blue Steel
6:ES_Gill Bates - _91nova")
![Sparkmaker Original Light-Curing Resin SLA 3D Printer [unboxing / review / first test]](https://i.ytimg.com/vi/PggwKV1_qDc/mqdefault.jpg "Sparkmaker Original Light-Curing Resin SLA 3D Printer [unboxing / review / first test]
Hy There,
In this video i will show my new printer i got it from banggood to test.
Its sparkmaker ORIGINAL
you can buy it here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Original version:
https://www.banggood.com/custlink/KvKDnjKG2v
FHD version:
https://www.banggood.com/custlink/G33DQj3vkh
coupon: BGHU581 $279 expire date： 20.2.2020
Resin:
https://www.banggood.com/custlink/3vvKnLDmkZ
Parts and accessoriess:
https://www.banggood.com/custlink/KmGKNoGGU5
If you already got original sparkmaker, you can buy also upgraded kit wich include, bath, lcd, light, motherboard and the top base of a printer,
basicly just a few components stay from the original printer, and cost about half of FHD printer.
More about printer:
Sparkmaker Upgraded FHD Light-Curing Desktop UV Resin SLA 3D Printer 110mm*61.8mm*125mm Build Volume Support Off-line Print
Suitable UV Sensitive Resin for you to choose:
- Sparkmaker Resin
- Anycubic Resin
Features:
1. Most affordable desktop SLA 3D printer
2. Support off-line print, you can forget about connection problems
3. With 98*55*125mm build volume
4. Easy to use, video and manual for reference
5. Multiple&Colorful resins for choose: LCD-W / LCD-T / LCD-E / LCD-N / LCD-C
6. With LED indicator light
7. Patented stylish & light weight, only about 3KG
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: You Tube audiolibrarry
1: We March Together - Patrick Patrikios
2: Greedy Patrick - Patrikios
3: No Favours - Patrick Patrikios
4: Alaska Sky - Patrick Patrikios
5: Touch - Patrick Patrikios
6: Hot Coffee - Patrick Patrikios
7: Running Out - Patrick Patrikios")
![Making of: DJI Osmo extension rod [170cm extended]](https://i.ytimg.com/vi/Pr2iEVCqkyQ/mqdefault.jpg "Making of: DJI Osmo extension rod [170cm extended]
Hy There,
In this video ill make very usefull gadget for DJI Osmo using cheapest monopod, so i extend osmo to 170cm
we just need a few parts all of them can be make with 3D printer, but i want to complicate a bit more and make it out of aluminium.
Gadget is really great for low as for high shots.
using is really simple and got nice result, just cant wait to use it on some project.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, gopro 4, DJI Osmo
Music is from YouTube audiolibrarry:
-Seven Twenty - Diamond Ortiz
-Nimbus - Eveningland
-Lost Time - Eveningland")
![NEJE 3 max laser engraver / cutter [unbox / review / first test] + grounding upgrade & A40640](https://i.ytimg.com/vi/Q6K4R8Dc60M/mqdefault.jpg "NEJE 3 max laser engraver / cutter [unbox / review / first test] + grounding upgrade & A40640
Hy There
In this video i will review new engraver i got from neje to test, its NEJE 3 MAX with A40640 laser modul.
i can easily say that its the best machine i try so far, got amazing working area, powerfull laser modul for cutting and with upgrades on neje 3 hit right to the point when they add things people need not some fancy sh..t but they add air assist valve, relay and emergency button, + they made entire machine more ridgit and add a cable chain, so machine is really at next level, and most amazing out of all is that it start at 409$ + you will get extra height adjuster, belt tensioners and metal air assist noozle, specially for that laser modul.
You can buy one here:
NEJE 3 MAX:
https://shareasale.com/u.cfm?d=886868&m=101855&u=2689002&afftrack=
Extension kit:
https://shrsl.com/3kvr9
Honeycomb panel for neje max:
https://shrsl.com/3kvrc
All NEJE items:
https://shrsl.com/3kvrd
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Dont forget to use coupon code for neje 3: V010WZ38E9ZN
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemicsounds:
1: ES_Curiosidad (Tape Machines Remix) (Instrumental Version) - Nico Rengifo
2: ES_Play With Me - DEX 1200
3: ES_Netrunner - Heyson
4: ES_Domino Effect - Tape Machines
5: ES_Bodies and Souls - Tape Machines
6: ES_Just Out of Reach - Tape Machines")
![How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included]](https://i.ytimg.com/vi/QRg0ZAvxVFk/mqdefault.jpg "How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included]
Hy There,
Speed 1.25 work just fine i think if you want to save minute or two
I already make a few video about RC hydraulic and see, that there is preatty good interest for that kind of video, so i decided to make a new video about how to make rc cylinder without cnc machine, maybe the video is too long, but i want to explain as much as i can so everyone with a chep small lathe can make his own rc cylinder.
But at the same time if you got a bigger lathe, just multiply the measures and you can make a real cylinder for your tractor, excavator or any other tool, Main concept is tottaly the same.
And here is the video about how to make valve:
https://www.youtube.com/watch?v=DPEbNPFBz9A&t
If you got some questine fell free and ask it into comment.
If there will be enough interest (comment) i will make that kind of video also for how to make rc hydraulic valve only with minilathe
i also planing to make a hydraulic pump but still looking for more free time :)
material i used:
-12/13mm brass tube
-18mm brass round rod
-13mm aluminium round bar
-4mm steel rod
-6mm brass round bar (optional)
-4mm hex round bar (optional)
-4x1 o ring
-10x1 o ring
-11x1 o ring
-M3 self lock nut
-M4 nut
-threadlock
Plans you can find there:
(there is plans in jpg photo and original plans you need google layout 2015 to open it)
https://drive.google.com/open?id=12f5FxSjrCwPes6v8aiMdLLj71kn7Huop
My other hydraulic videos:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v ysOO3XsOXE
https://www.youtube.com/watch?v 2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000 & gopro4
Music is from YouTube audiolibrarry:
The Life and Death of a Certain K. Zabriskie, Patriarch - Chris Zabriskie
Skladba The Life and Death of a Certain K. Zabriskie, Patriarch izvajalca Chris Zabriskie je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Vir: http://chriszabriskie.com/vendaface/
Izvajalec: http://chriszabriskie.com/")
![Neje A40640 40w laser modul [unbox / review / first test] best laser modul modul i try](https://i.ytimg.com/vi/QrtGMzzSWDo/mqdefault.jpg "Neje A40640 40w laser modul [unbox / review / first test] best laser modul modul i try
Hy There,
In this video ill try to make a review of best laser modul from NEJE manufacturer.
Laser turn out as wery powerfull for cutting, but also better bor engraving like 20 and 30w modul.
Biggest pros of this laser is its fixed focus, wich focus light into square dot with awesome power.
You can buy the laser modul here here:
40w modul:
https://shrsl.com/2y2km
All products from neje store:
https://shrsl.com/2y2ko
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
Links to stl files for mounting plate:
https://www.thingiverse.com/thing:4835350
and air assist for 30/40w modul:
https://www.thingiverse.com/thing:4835361
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from:Epidemic Sounds:
1: ES_Backyard Stories - Sum Wave
2: ES_No Worries - Daxten
3: ES_You Know - Mefree
4: ES_Be Free With Me (Instrumental Version) - Siine
5: ES_Warm Breeze - Paeta
6: ES_Just About Us - Oman")
![How to fix car rear light - rust problem bad contact on bulb [water demage]](https://i.ytimg.com/vi/R4Glfd1OKaM/mqdefault.jpg "How to fix car rear light - rust problem bad contact on bulb [water demage]
In this video ill show you how i fix rear light on my old but great car FIAT STILO, there is a problem that water come into light and that make the contact rusting. Because of rust the lowest bulb (position and fog) dont had a good contact and dont glow as it must.
About 5 years ago i got this problem on right rear light, i fix it on that way and work great so far (didnt change any single bulb) and now the same problem appear on left side, well this time i make this video to see how easy is fix this problem, so you can spend the money for new light on some other project.
Car: fiat Stilo 1.9 jtd 2004
camera: sony a6000, DJI osmo+ and gopro 4 black
Photo, video $ production: Tine Sedej
music:
Leavin, MK2")
![Machifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]](https://i.ytimg.com/vi/RBjkaAWlT5I/mqdefault.jpg "Machifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]
Hy There,
In this video ill show you another great gadget for minilathe, this qctp is make complete out of steel, and its unbealivable nicely finished, and worked more than awesome for the price.
Ofcourse there are availible also other sizes for bigger lathe.
You can buy these items here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Machifit DMC-250-000 Cuniform GIB Type Quick Change Tools Kit Tool Post 250 001-010 Tool Holder for Lathe Tools
https://www.banggood.com/custlink/3GmECNPcKt
coupon code: BGHU813
discount: 18%off
warehouse: CN UK CZ
30pcs
EXP: 15.10
Mini Quick Change Tool Post Holder Kit Set Aluminum Alloy Tool Post Lathe Tools:
https://www.banggood.com/custlink/GKDRJstWDl
coupon code: BG236003
discount price：29.99
warehouse: CN
50pcs
Bigger and other type of QCTP:
https://www.banggood.com/custlink/GDDYCAtWmk
Minilathe cutting tool video:
https://www.youtube.com/watch?v=y0xvpKaexD8&t
Minilathe chuck video:
https://www.youtube.com/watch?v=mgyiqCb5IR0&t
Centering tool:
https://www.youtube.com/watch?v=9PEL_nlkDTQ&t
Proxxon holder for minilathe:
https://www.youtube.com/watch?v=1AJPM3GXaco
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrarry
1: Dont Ya Bite Now - Dan Lebowitz
2: Deep State - Vans in Japan
3: Late Night Train - Vans in Japan
4: Never You Mind - Dan Lebowitz
5: Movin Up - Dan Lebowitz
6: A Call Is Upon Us - The 126ers")
![Engine [tractor] starter repair - diy fix](https://i.ytimg.com/vi/RlT_1WHPtZ4/mqdefault.jpg "Engine [tractor] starter repair - diy fix
Hello,
In this video ill show you how easy is to repair an engine starter.
in my case i will repair starter from a small tractor, but the concept of working is the same on all engines, (diesel, gas fuel, car engine, tractor, motor engine, heavy equipment...).
If the starter heasnt enough power there are propobly problem with the brushes or colector.
Sometimes is all you need to do change the brushes for a few $
Specially on starter from tractors, truck and heavy equipment problems make fluid, grease and oil wich leak into starter motor, and all we must to do is some cleaning.
Music:
Cut Trance - Cephelopod
Kevin MacLeod
Skladba Cut Trance - Cephelopod izvajalca Kevin MacLeod je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Vir: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100273
Izvajalec: http://incompetech.com/")
![Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]](https://i.ytimg.com/vi/RzmqjxgVUAM/mqdefault.jpg "Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]
Hy There,
In this video i will unbox, make some review and test my new tool for milling machine, NEW ! Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit (Ref: 111026)
i ordered it from ebay, there are lot of version of it, i choose 5 version with tailstock, 4yaw chuck and dividing plate.
rotary table is gread for mill some radius or must heave tool for dividing operations, loike to making gears and other stuff
Making of: [machining] mounting accessories for rotary table
https://www.youtube.com/watch?v=0KV_dqZOPCs&feature=youtu.be
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, gopro 4black
Music is from YouTube audiolibrarry:
Arp Bounce - Geographer
Blue Macaw - Quincas Moreira
Trancer - Gunnar Olsen
Waterfront Property - Max McFerren")
