Uploaded October 2021 | Updated September 2026, 2 weeks ago
Hy There,
In this video i'll try to make stamps with my Neje laser engraver, in this video i'll use neje 2 because it's most handy and use different laser modul 20w 30w and 40w but i think it will work with any model of laser.
You can neje engraver machines, laser moduls and other here:
Neje store: shrsl.com/2y2ko
Neje on banggood: banggood.com/custlink/GvvRSCVoPm
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from: Epidemic Sound:
1: ES_Celebration of Life - Tomas Skyldeberg
2: ES_Searching for Dreams - Tomas Skyldeberg
3: ES_Side By Side - Tomas Skyldeberg
Hy There,
In this video i'll try to make stamps with my Neje laser engraver, in this video i'll use neje 2 because it's most handy and use different laser modul 20w 30w and 40w but i think it will work with any model of laser.
You can neje engraver machines, laser moduls and other here:
Neje store: shrsl.com/2y2ko
Neje on banggood: banggood.com/custlink/GvvRSCVoPm
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from: Epidemic Sound:
1: ES_Celebration of Life - Tomas Skyldeberg
2: ES_Searching for Dreams - Tomas Skyldeberg
3: ES_Side By Side - Tomas Skyldeberg
![Neje A40640 40w laser modul [unbox / review / first test] best laser modul modul i try](https://i.ytimg.com/vi/QrtGMzzSWDo/mqdefault.jpg "Neje A40640 40w laser modul [unbox / review / first test] best laser modul modul i try
Hy There,
In this video ill try to make a review of best laser modul from NEJE manufacturer.
Laser turn out as wery powerfull for cutting, but also better bor engraving like 20 and 30w modul.
Biggest pros of this laser is its fixed focus, wich focus light into square dot with awesome power.
You can buy the laser modul here here:
40w modul:
https://shrsl.com/2y2km
All products from neje store:
https://shrsl.com/2y2ko
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
Links to stl files for mounting plate:
https://www.thingiverse.com/thing:4835350
and air assist for 30/40w modul:
https://www.thingiverse.com/thing:4835361
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from:Epidemic Sounds:
1: ES_Backyard Stories - Sum Wave
2: ES_No Worries - Daxten
3: ES_You Know - Mefree
4: ES_Be Free With Me (Instrumental Version) - Siine
5: ES_Warm Breeze - Paeta
6: ES_Just About Us - Oman")
![How to fix car rear light - rust problem bad contact on bulb [water demage]](https://i.ytimg.com/vi/R4Glfd1OKaM/mqdefault.jpg "How to fix car rear light - rust problem bad contact on bulb [water demage]
In this video ill show you how i fix rear light on my old but great car FIAT STILO, there is a problem that water come into light and that make the contact rusting. Because of rust the lowest bulb (position and fog) dont had a good contact and dont glow as it must.
About 5 years ago i got this problem on right rear light, i fix it on that way and work great so far (didnt change any single bulb) and now the same problem appear on left side, well this time i make this video to see how easy is fix this problem, so you can spend the money for new light on some other project.
Car: fiat Stilo 1.9 jtd 2004
camera: sony a6000, DJI osmo+ and gopro 4 black
Photo, video $ production: Tine Sedej
music:
Leavin, MK2")
![Machifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]](https://i.ytimg.com/vi/RBjkaAWlT5I/mqdefault.jpg "Machifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]
Hy There,
In this video ill show you another great gadget for minilathe, this qctp is make complete out of steel, and its unbealivable nicely finished, and worked more than awesome for the price.
Ofcourse there are availible also other sizes for bigger lathe.
You can buy these items here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Machifit DMC-250-000 Cuniform GIB Type Quick Change Tools Kit Tool Post 250 001-010 Tool Holder for Lathe Tools
https://www.banggood.com/custlink/3GmECNPcKt
coupon code: BGHU813
discount: 18%off
warehouse: CN UK CZ
30pcs
EXP: 15.10
Mini Quick Change Tool Post Holder Kit Set Aluminum Alloy Tool Post Lathe Tools:
https://www.banggood.com/custlink/GKDRJstWDl
coupon code: BG236003
discount price：29.99
warehouse: CN
50pcs
Bigger and other type of QCTP:
https://www.banggood.com/custlink/GDDYCAtWmk
Minilathe cutting tool video:
https://www.youtube.com/watch?v=y0xvpKaexD8&t
Minilathe chuck video:
https://www.youtube.com/watch?v=mgyiqCb5IR0&t
Centering tool:
https://www.youtube.com/watch?v=9PEL_nlkDTQ&t
Proxxon holder for minilathe:
https://www.youtube.com/watch?v=1AJPM3GXaco
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrarry
1: Dont Ya Bite Now - Dan Lebowitz
2: Deep State - Vans in Japan
3: Late Night Train - Vans in Japan
4: Never You Mind - Dan Lebowitz
5: Movin Up - Dan Lebowitz
6: A Call Is Upon Us - The 126ers")
![Engine [tractor] starter repair - diy fix](https://i.ytimg.com/vi/RlT_1WHPtZ4/mqdefault.jpg "Engine [tractor] starter repair - diy fix
Hello,
In this video ill show you how easy is to repair an engine starter.
in my case i will repair starter from a small tractor, but the concept of working is the same on all engines, (diesel, gas fuel, car engine, tractor, motor engine, heavy equipment...).
If the starter heasnt enough power there are propobly problem with the brushes or colector.
Sometimes is all you need to do change the brushes for a few $
Specially on starter from tractors, truck and heavy equipment problems make fluid, grease and oil wich leak into starter motor, and all we must to do is some cleaning.
Music:
Cut Trance - Cephelopod
Kevin MacLeod
Skladba Cut Trance - Cephelopod izvajalca Kevin MacLeod je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Vir: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100273
Izvajalec: http://incompetech.com/")
![Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]](https://i.ytimg.com/vi/RzmqjxgVUAM/mqdefault.jpg "Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]
Hy There,
In this video i will unbox, make some review and test my new tool for milling machine, NEW ! Soba 5 / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit (Ref: 111026)
i ordered it from ebay, there are lot of version of it, i choose 5 version with tailstock, 4yaw chuck and dividing plate.
rotary table is gread for mill some radius or must heave tool for dividing operations, loike to making gears and other stuff
Making of: [machining] mounting accessories for rotary table
https://www.youtube.com/watch?v=0KV_dqZOPCs&feature=youtu.be
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, gopro 4black
Music is from YouTube audiolibrarry:
Arp Bounce - Geographer
Blue Macaw - Quincas Moreira
Trancer - Gunnar Olsen
Waterfront Property - Max McFerren")
![Geeetech Prusa I3 pro B 3D Printer DIY kit assembly [time laps & photo]](https://i.ytimg.com/vi/Se3MyJbPuiM/mqdefault.jpg "Geeetech Prusa I3 pro B 3D Printer DIY kit assembly [time laps & photo]
Time laps and photo of building 3D printer Acrylic Geeetech Prusa I3 pro B 3D Printer DIY kit.
I bought it on ebay for about $200
For wiring (connection) the elctronics (gt2560 board) watch this video:
https://www.youtube.com/watch?v=sqQI 4UNp0
Thanks for watching.
Music:
The Only Girl - Silent Partner
Santo Rico - Twin Musicom
Payday - Silent Partner
Skladba Santo Rico izvajalca Twin Musicom je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Izvajalec: http://www.twinmusicom.org/")
![Gweike G2 20W Fiber Laser Engraver + addons [Unbox/Review/Test] Metal engraving /alu/brass/plastick](https://i.ytimg.com/vi/TAxZWqb2yn0/mqdefault.jpg "Gweike G2 20W Fiber Laser Engraver + addons [Unbox/Review/Test] Metal engraving /alu/brass/plastick
Hy There,
In this video ill review another laser engraver wich is deffinitely a next level tool.
Its Gweike G2 fiber laser, those kind of lasers are on market for quite a long time but their price was over $5-7k just a few years ago but gweike bring to us powerfull, extremely fast and precize fiber laser for amazing price, compare to some better diode or co2 laser machine.
For more details, price and order check here:
https://shareasale.com/r.cfm?b=2103006&u=2689002&m=128802&urllink=&afftrack=
https://www.gweikecloud.com/?ref=spswancv
Free shipping from US/CA/EU/UK/AU
Discount coupon:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
I forgot to tell, this laser also work with well known lightburn software, but Glaser softwer offer us everything we need and a lot more, but there is still option to use constantly developed lightburn software.
This is so amazing machine because it work on many usefull materialls, like all kind of metals, inox, aluminium, brass, copper, plastic, leather, ceramic, tiles, and much more.
beside of its super power this laser engraver is also unbealivable fast, we can actually miss engraving process when blink with eye.
I see lot of potential in that machine for some small buisness, i already make many engraves on my tools and home, but i afraid soon will be marked every object in my house :)
0:33 unboxing
1:26 review
5:10 assembling
6:27 software
8:48 first test
9:36 dxf engrave
10:29 photo engrave
11:55 colour engrave on inox
12:50 text engrave
14:15 speed test
16:45 materialls test
19:59 deep engrave and cutting
21:08 accessories (rottary chuck, rottary rollers and protective shield)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
dell xps 13 (screen recording)
Music is from: Epidemic sound:
1:ES_River Below - FLYIN
2:ES_Amazonas - FLYIN
3:ES_Aspire - Joel Rampage
4:ES_Baby, So Am I - Young Community
5:ES_Diluted - Aiyo - Kopija
6:ES_Diluted - Aiyo
7:ES_Essence of Love - Ben Elson
8:ES_Hazy Horizon - Aiyo
9:ES_Hogarth - Lupus Nocte
10:ES_Just Struttin - Tigerblood Jewel
11:ES_Natural - oomiee
12:ES_Solid Ground (Instrumental Version) - King Sis
13:ES_A New Kind - Toby Tranter")
