WYOMINGWOODTURNER | Natural Edge Bowl ~~Woodturning with Sam Angelo @WYOMINGWOODTURNER | Uploaded July 2022 | Updated October 2024, 18 hours ago.
Sam silently turns a Bark Edge bowl......
In this video Sam will show how he completes a rough-turned Natural Edge bowl-made from Honey Locust. He does not narrate this video but simply shows some excellent close-ups of his tool work and turning this bark edge bowl. Oh, and there is no music~ "Turning the intermittent edge is not that difficult."
You can show your support for my YT videos-Buy me a cup of coffee
Just click this link: Thanks Sam Angelo
buymeacoffee.com/SamAngelo
Chapter TimeCodes: Click on the time and jump to the topic listed
00:00 Introduction
00:24 Truing up the drive block
00:44 Working on the outside of the piece and
Forming the tenon
01:26 Truing up the outside of the bowl to the rim
02:16 Shear scraping the outside of the bowl
03:05 Final work on the spigot with a point tool
03:30 Using a Negative Rake Scraper (NRS) on the outside
04:35 Beginning the finishing with an oil blend
04:55 A shot of the finished bowl
05:10 The first Reverse chucking
05:40 Begin work on the inside of the bowl
06:55 Using the bottom feeder
07:47 Cleaning up with a NRS
08:38 SANDING!!! Yikes
09:18 Preparation for finishing by cleaning the surface with paint thinner
09:32 Applying an oil finish
10:10 Final REVERSE CHUCKING
10:26 Work on the foot
10:43 Sanding and finishing
11:25 Cutting off and sawing off the “nub”
11:48 Conclusion and showing off the finished piece
My Playlist on Natural Edge Bowls:
youtube.com/playlist?list=PLL5-IWEcq6B976cu7sOgzzEFDIxOSBiXE
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Sam silently turns a Bark Edge bowl......
In this video Sam will show how he completes a rough-turned Natural Edge bowl-made from Honey Locust. He does not narrate this video but simply shows some excellent close-ups of his tool work and turning this bark edge bowl. Oh, and there is no music~ "Turning the intermittent edge is not that difficult."
You can show your support for my YT videos-Buy me a cup of coffee
Just click this link: Thanks Sam Angelo
buymeacoffee.com/SamAngelo
Chapter TimeCodes: Click on the time and jump to the topic listed
00:00 Introduction
00:24 Truing up the drive block
00:44 Working on the outside of the piece and
Forming the tenon
01:26 Truing up the outside of the bowl to the rim
02:16 Shear scraping the outside of the bowl
03:05 Final work on the spigot with a point tool
03:30 Using a Negative Rake Scraper (NRS) on the outside
04:35 Beginning the finishing with an oil blend
04:55 A shot of the finished bowl
05:10 The first Reverse chucking
05:40 Begin work on the inside of the bowl
06:55 Using the bottom feeder
07:47 Cleaning up with a NRS
08:38 SANDING!!! Yikes
09:18 Preparation for finishing by cleaning the surface with paint thinner
09:32 Applying an oil finish
10:10 Final REVERSE CHUCKING
10:26 Work on the foot
10:43 Sanding and finishing
11:25 Cutting off and sawing off the “nub”
11:48 Conclusion and showing off the finished piece
My Playlist on Natural Edge Bowls:
youtube.com/playlist?list=PLL5-IWEcq6B976cu7sOgzzEFDIxOSBiXE
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
