WYOMINGWOODTURNER | My Favorite Woodturning Project: Four Ways for June 1st with Sam Angelo @WYOMINGWOODTURNER | Uploaded June 2024 | Updated October 2024, 1 hour ago.
Four ways to turn video.....
For the June 1st "Four Ways" video, Sam has selected the topic----
which is, to Turn our Favorite piece.
Sam's favorite piece would be a lidded box or container. Watch as Tomislav, Richard, and Mike select and turn what they consider to be their favorite project for the lathe. The links for all the videos are directly below: please enjoy them thanks.
Watch as my fellow Woodturners in the four ways to turn group turn their favorite item. See the links directly below.
Tomislav Tomašić youtu.be/Xp6yrPT2kPA?si=GiFzsDf-3MwwE9ya
Richard Raffan youtu.be/h9rhcf9uHy0
Mike Peace youtu.be/6zUwqRzRQ6c
Time Codes Below:
Thanks for watching my videos-
Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Chapter time codes: click on the time and jump to the desired topic
00:00 Introduction to the video
01:33 The Project explained
03:22 Wood selection
04:45 Attaching the wood to a scroll chuck
07:06 Laying out the box blank
09:19 Setting the dimensions for the box
10:00 Parting off
12:10 Finishing the bottom of the base
15:07 Adding shape to the box
18:07 Hollow the lid
23:07 Sand and finish the inside of the lid
24:34 Chasing threads on the lid
29:07 Close-up of threads on the lid
30:38 Preparing to chase threads on the base
33:03 Thread chasing on the male tenon
35:48 Making the connection
37:33 Lining up to the grain
40:22 Conclusion, and thanks for watching
Four ways to turn video.....
For the June 1st "Four Ways" video, Sam has selected the topic----
which is, to Turn our Favorite piece.
Sam's favorite piece would be a lidded box or container. Watch as Tomislav, Richard, and Mike select and turn what they consider to be their favorite project for the lathe. The links for all the videos are directly below: please enjoy them thanks.
Watch as my fellow Woodturners in the four ways to turn group turn their favorite item. See the links directly below.
Tomislav Tomašić youtu.be/Xp6yrPT2kPA?si=GiFzsDf-3MwwE9ya
Richard Raffan youtu.be/h9rhcf9uHy0
Mike Peace youtu.be/6zUwqRzRQ6c
Time Codes Below:
Thanks for watching my videos-
Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Chapter time codes: click on the time and jump to the desired topic
00:00 Introduction to the video
01:33 The Project explained
03:22 Wood selection
04:45 Attaching the wood to a scroll chuck
07:06 Laying out the box blank
09:19 Setting the dimensions for the box
10:00 Parting off
12:10 Finishing the bottom of the base
15:07 Adding shape to the box
18:07 Hollow the lid
23:07 Sand and finish the inside of the lid
24:34 Chasing threads on the lid
29:07 Close-up of threads on the lid
30:38 Preparing to chase threads on the base
33:03 Thread chasing on the male tenon
35:48 Making the connection
37:33 Lining up to the grain
40:22 Conclusion, and thanks for watching
