My Sidewalk Water Printer Finally Works! Kind of... @bytesizedengineering
My Sidewalk Water Printer Finally Works! Kind of...  @bytesizedengineering
Uploaded October 2026 | Updated November 2026, 3 days ago
This is my hydraulic dot matrix printer, which sounds way too technical and complicated. Essentially, it's a sidewalk water printer. It is a gadget I designed that sprays synchronized bursts of water from the back of my Onewheel. The goal is to print messages of kindness with water as I ride through public spaces. Think of it as wholesome, nondestructive graffiti. Of course, things never go according to plan. In part 1, I struggled to bring this thing to life. At the beginning, this project felt like an absolute failure, but eventually, I got a janky prototype that printed words, as long as you didn't look too closely. That first test gave me enough confidence to move forward.

DigiKey blog post: digikey.com/en/maker/projects/im-vandalizing-my-community-with-kindness-part-2/b7fca3ecb63d46928a4511cf25eec0d8

Visit bit.ly/DigiKeyByteSized for the best selection of electronic components.
My Sidewalk Water Printer Finally Works! Kind of...I found a simple way to save my lungsDemonstrating An Automated Blast GateI dropped the ball keeping track of how tall my kids areYou Secretly Designed, Now I Must Build!Building An Automated Blast GateIm reviving the Openwheel project!I have to try 1 Million combinations? Safe Cracking Robot - Part 2How To Setup A Raspberry Pi Home Automation HubCan Your Tripod Do This?How To Make A Lithium Battery Pack With 18650 Cells | Practical Skills For MakersTwo robots are better than one
byte sized engineering |

My Sidewalk Water Printer Finally Works! Kind of...

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER