Peter Millard
| My Last Wardrobes, Part 4; doors [video 409] @10MinuteWorkshop | Updated October 2024, 3 hours ago.
🔇 TAP TO UNMUTE
My Last Wardrobes, Part 4; doors [video 409] @10MinuteWorkshop
![My Last Wardrobes, Part 4; doors [video 409]](https://i.ytimg.com/vi/cZF6Bk1Q5BQ/hqdefault.jpg "My Last Wardrobes, Part 4; doors [video 409]
My Last Wardrobes, Part 4; doors [video 409]")
![Mirka Deros & Deos giveaway and long term test! [video 551]](https://i.ytimg.com/vi/caP9umd-roM/hqdefault.jpg "Mirka Deros & Deos giveaway and long term test! [video 551]
So a little over a year ago I put all my sanders away in a box to see if I could cover all my sanding needs for a year just using two sanders - the #Mirka #Deros 150/5mm random orbital, and a Mirka #Deos orbital or ‘palm’ sander. These are my findings - and to make sure my judgement wasn’t clouded by potential long-term ownership, I’m giving these two sanders away, details below.
Full disclosure; I purchased these sanders direct from Mirka, but I did receive a discount; Mirka UK have kindly agreed to transfer the balance of the warranty (roughly 2 years) to the new owners, valid for UK & ROI residents only.
To put your name down for either sander visit 10minuteworkshop.com and sign up as a Plus member* and a link to the entry form will be published in the giveaways forum in the next couple of days.
Or you can simply signup to the 10MinuteWorkshop newsletter at 10MW.email and the link will be included in a special newsletter, again sent out in a couple of days.
The lists will stay open until the end of November 2023, so if you’re interested you need to get a wriggle on. Full T&Cs available on the signup form.
*All members are eligible for the giveaways.
+++++++++
Other makers mentioned:-
Keith at Rag n Bone Brown - https://youtu.be/Cs73ke3clKs?t=467
Matt at Badger Workshop - https://www.youtube.com/channel/UCSQRZgy9lvGsLrWn6sFHZHw
Leo at Hand-i-craft - https://www.youtube.com/watch?v=wRudRP7GDAM&t=3s
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Sanders Playlist - https://bit.ly/SandersPlaylist
Money, Mouth, Mirka - https://youtu.be/5XDUWQ_Jodo
Which Sander When? - https://youtu.be/uBSOan7D1Ow
Deros - https://youtu.be/GxkTdbSXTsc
$135 Deros? - https://youtu.be/46Ws3Bgp_bA
Sealey or Hyvst - https://youtu.be/jelEm54OLQw
‘Mondrian’ side table - https://youtu.be/bq7amS5MkPI
Clamp racks - https://youtu.be/qJ4niRhu4zY
Router bench - https://youtu.be/h47fFhhohgs
Tracksaw picture frame - https://youtu.be/UuWLWT-ZKTg
Cheap Cabinet - https://youtu.be/5oJshwlDVKo
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
All about doors playlist - http://bit.ly/AllAboutDoors
All about hinges playlist - http://bit.ly/allabouthinges
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![Breathe Clean Air - Workshop air filter [video 464]](https://i.ytimg.com/vi/dxwZ5KCbwfM/hqdefault.jpg "Breathe Clean Air - Workshop air filter [video 464]
I bought a new air scrubber for the workshop recently, and in this video I tell you why I bought this one, and we get to hang it on the ceiling. Also, mains cables, again. Yay!
For clarity, I refer to this unit as British made when what I meant to say - and actually said many, many times - was British manufacturer, but the one good take was the one where I mis-spoke. I dont actually know where this is made - Id speculate china, same as everything else - but if its something that concerns you deeply then check with Record Power.
Also note that Im talking specifically about the Record Power AC400 unit - I have no direct experience of the alternative units, but links are provided below so you can check the specs yourselves.
Record Power AC400 Workshop Air Scrubber basic specs: 14Kg, 430 x 260 x 510mm, 3 speed, low - 60dB, med 63dB, high 67dB, remote control included, 1, 2, and 4-hour timer run-on as standard, 1.8 metre fixed mains cable (boo!) 5 and 1 micron filters, easily accessible and changed without tools. Full fixing kit included. I paid ~£170 delivered and have to be honest didnt look too closely at the alternatives because this seemed to tick all the boxes at the right price, was in stock and available when I was ready to buy. As always, I can only comment on the unit I purchased and my direct experiences with it, be sure to do your own research before spending your hard-earned! 👍
Record Power AC400 - https://amzn.to/3A2QaTs (US: nope, sorry.)
Axminster Craft AC15 AFS - https://amzn.to/3il0kZK
Axminster Trade AT25 AFS - https://amzn.to/3xfAQRG
Rutlands Premium Air Filtration System - https://bit.ly/3A6zhXW
Jet tools AFS 1000B - https://bit.ly/3CcGNmb (US site, can’t see a UK one 🤷♂️)
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
-
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned / recent popular videos:-
Air quality monitor - https://youtu.be/1Xwmw6EZUOQ
Fan in a can - https://youtu.be/DcuIU4WsiWA
Fan Can Db check - https://youtu.be/ktHq2jQBfEk
My Cheap Nailer and Compressor - https://youtu.be/eJo3JMkv3JE
Basic wall cabinets - https://youtu.be/vthcuwE6bM4
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Some tools used, some recent buys:-
Air quality monitor - https://amzn.to/3l3Z7HM
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
Fisch brad point bit set - https://amzn.to/3ewSUQK (US:[similar] https://amzn.to/2OcuWKX)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![My Cheap Nailer and Compressor [video 463]](https://i.ytimg.com/vi/eJo3JMkv3JE/hqdefault.jpg "My Cheap Nailer and Compressor [video 463]
Its been 6 months since I bought my compressor and nailer, and in this video I talk about why I bought what I did. Enjoy!
For clarity, Im talking about the 8-litre Hyundai HY5508 240v compressor - I have no direct experience of the larger units.
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned / recent popular videos:-
Keith Brown’s Compressor comparison - https://www.youtube.com/watch?v=UCX4jVy35Wg
Keith Brown’s compressor spraying - https://www.youtube.com/watch?v=pNnEHZBy3ik
Basic wall cabinets - https://youtu.be/vthcuwE6bM4
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Silverline nailer/stapler - https://amzn.to/3rGorF4 (US:[similar] https://amzn.to/3f97sGE)
Maestri ME606 electric nailer/stapler - http://amzn.to/2pNm7ye (US: http://amzn.to/2pGMfuf)
Ryobi Airstrike 18g nailer (bare tool) - https://amzn.to/37oe5AF (US [full set]; https://amzn.to/3fdptTZ)
Fisch brad point bit set - https://amzn.to/3ewSUQK (US:[similar] https://amzn.to/2OcuWKX)
Long Brad point bit set [similar] - https://amzn.to/3im84t6 (US:[similar] https://amzn.to/3ez2670)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![How I Fit Double Extension Drawer Slides [video 521]](https://i.ytimg.com/vi/eK8NlFYfUMc/hqdefault.jpg "How I Fit Double Extension Drawer Slides [video 521]
In this one I make some inset drawer boxes from Birch-faced Poplar plywood with Maple-faced globulus plywood fronts, and I fit them with double extension ‘ball-race’ soft close drawer slides. Enjoy!
Full list of individual products used in this video below, or browse my Amazon store at 10MinuteAmazon.com
Interested in the Triton duo-doweller, Birch ply alternatives or how the undercount runners work out? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
I used the Keith Brown Original Oil Wax finish - also available in clear and food safe versions here - https://www.etsy.com/uk/listing/1314398822/kb-oil-wax-wood-finish-triple-pack
Note the AUK router was supplied for long-term review by Woodworkers Workshop. I have not been paid to make this video or say nice things about the product, as a WWW affiliate I may earn from qualifying sales; be sure to use the offer code ’10MINUTEWORKSHOP’ with the links below for a 5% discount (valid until December 31st 2022) on these products, and thanks so much to Woodworkers Workshop for extending that offer.
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-1500w-fixed-base-router/?ref=YUDlxZ4f
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Drawer Cabinet - https://youtu.be/5oJshwlDVKo
Top Drawer! - https://youtu.be/HcNRId9a3Lw
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Torsion box Router Bench - https://youtu.be/Q-Vyq4ShHT0
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Browse the full list for this video here - https://amzn.to/3lpwSWH
Visit my Amazon store here - 10MinuteAmazon.com
Soft close drawer slides direct link - https://amzn.to/3ZrOvDU (US: [similar] https://amzn.to/3L2vofj)
Sorry, but I won’t link to the 23g nailer as the whole buying experience was woeful and the bunch of monkeys who sold it don’t deserve anybody’s business.
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Triton Duo Doweller (full review coming soon) - https://amzn.to/3XzNQyF (US: nope, sorry 🤷♂️)
Adjustable cabinet feet - https://amzn.to/3XzQfJH (US: [similar] https://amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Kitchen Extension in a Victorian London House [video 533]](https://i.ytimg.com/vi/eULepp_7CIM/hqdefault.jpg "Kitchen Extension in a Victorian London House [video 533]
We live in a Victorian terraced house in London and earlier this year me and Mrs 10 minutes decided we needed a new kitchen; a few months later we’re in the middle of the largest building project we’ve ever taken on, and in this video I explain what we’re doing and why, and how much of this might be coming to the channel over the course of the next few months.
No, I’m not turning into a house-bashing or DIY channel - I’m completely hands off on this project, other than supplying ideas and money, but I thought there may be some interesting videos to be made from a customers perspective and my initial ideas are:-
What do Architects do, and how to find one?
What to look for in a decent builder or building firm.
What do builders and architects look for in clients.
New kitchen - build or buy?
New floor - solid, engineered, or vinyl plank?
These are just initial thoughts; let me know in the comments if there’s anything else you’d like to have covered.
Full list of individual products used on this channel, browse my Amazon store at 10MinuteAmazon.com
Want to see how this project progresses? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
Want to know what all this is costing? Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Ikea Hack: Wall cabinets on the floor? - https://youtu.be/mRTVt9i8J4E
Painting method short - https://youtube.com/shorts/HEbxEospgVc
Painting Method long - https://youtu.be/ZIwNJGlVtwc
Birch Ply Alternatives - https://youtu.be/-injtkjghA8
Scribing an infill - https://youtu.be/g0W23buOgoE
Scribing a Face-frame - https://youtu.be/c2IthMh47nM
Scribing to a ceiling - https://youtu.be/nba3yyJYqpM
Kreg hinge jig - https://youtu.be/0wQMkWb4DjU
Painting MDF doors - https://youtu.be/ZIwNJGlVtwc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
Browse the Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Staedtler 0.9 mechanical pencil - https://amzn.to/3LbLN1j
0.9mm White leads - https://amzn.to/3a7T3e8
Trend Snappy de-burring tool (countersink) - https://amzn.to/3NRpNtx
Adjustable cabinet feet - https://amzn.to/3XzQfJH (US: [similar] https://amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenter’s square (gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![Atomstack A5 30w laser/engraver [Ad**][video 458]](https://i.ytimg.com/vi/ehigvHNj-7s/hqdefault.jpg "Atomstack A5 30w laser/engraver [Ad**][video 458]
In this video I take a look at the Atomstack A5 laser/engraver from Banggood, and I’m delighted to say that Dennis from the @HookedonWood channel joins me for a quick chat too, as he’s bit further along with his laser journey than I am! Enjoy!
** I purchased this laser from Banggood with my own money. I have not been paid to make this video or say nice things about the product; since buying the laser I have become a member of the Banggood affiliate program, and may earn from qualifying sales if you decide to make a purchase using the link provided - so if you do, thank you!.
Atomstack A5 30w laser/engraver - https://www.banggood.com/custlink/KKKEOMozFV
New 40w model
Atomstack A5 Pro 40w Laser/engraver - https://www.banggood.com/custlink/mmmRoqazPS
+++++++++
Be sure to take a look at Dennis’ content:-
Youtube - https://www.youtube.com/hookedonwood
Website - www.hookedonwood.online
Instagram - https://www.instagram.com/d.hookedonwood
Videos mentioned:-
My ultimate workbench: https://youtu.be/70DEFtp_2ew
New Zero clearance insert: https://youtu.be/R3K3RKn7yis
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned / recent popular videos:-
Festool vs Cheap tool, clamps https://youtu.be/mG5siTVitUw
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
Lidl Parkside plunge saw 2021 - https://youtu.be/kFyDGdH66HM
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
10 tools I wish I had at the start - https://youtu.be/enmHfvgRTrw
+++++++++
For gift ideas, take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Atomstack A5 30w laser/engraver - https://www.banggood.com/custlink/KKKEOMozFV
New 40w model
Atomstack A5 Pro 40w Laser/engraver - https://www.banggood.com/custlink/mmmRoqazPS
Square Enough clamp guides - http://bit.ly/10minuteShop
Lightburn - https://lightburnsoftware.com
Other handy tools:-
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Next-Gen Loose Tenon Jig - LTJ30 [video 535]](https://i.ytimg.com/vi/enGVfEwD-Tc/hqdefault.jpg "Next-Gen Loose Tenon Jig - LTJ30 [video 535]
In this video it’s my pleasure to introduce the next generation of the 10MW Loose Tenon Jig, the LTJ30
If you don’t know the back story I did a video about a DIY loose tenon jig a couple of years ago, it took about six months to wrestle a flat-pack cnc version of that jig into production and a second larger or Plus version of that jig followed about a year after that.
This new version combines the simple functionality of the original jig together with the shelf-pin goodness of the Plus jig, but in a new material and using a more readily available 30mm guide bush, hence the new name - the LTJ30.
Most of the first run has already sold but you can preorder at 10minute.shop, or on the ‘merchant shelf’ directly below the video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
All my Loose Tenon video in a playlist here - https://bit.ly/LooseTenons
Festool Domino Playlist - http://bit.ly/AllAboutlDomino
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
Why Buy This Saw - https://youtu.be/u7H5On0j_5c
Mondrian-style table in MD - https://youtu.be/bq7amS5MkPI
Birch Ply Alternatives - https://youtu.be/-injtkjghA8
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
O3Adhesive CA glue - https://amzn.to/3Fubfw0
O3Adhesive Accelerator - https://amzn.to/3zwtehH
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
I use the CTL Midi vac with bluetooth - google it for best prices.
Browse the Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![10 Tools I Wish I Had From The Start [Video 443]](https://i.ytimg.com/vi/enmHfvgRTrw/hqdefault.jpg "10 Tools I Wish I Had From The Start [Video 443]
In this video I take a quick look at #ten #tools - or tool categories - that I have now, that I wish I’d had when I was starting #woodworking. Enjoy!
End music is Dialogue by @DekobeBeats, check it out here:https://soundcloud.com/dekobe/dialogue?in=dekobe%2Fsets%2Fleft-behind
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos mentioned:-
400, Festool or Mafell - https://youtu.be/5kqui1b0SbU
071, Festool cheap tool Tracksaw P1 - https://youtu.be/_8sagpnlF1Q
285, Cheap vs Cheapest - https://youtu.be/nZGt_LqR5O8
209, Well they both suck - https://youtu.be/qu2R_qgDDaY
270, 10 year of Domino P1 - https://youtu.be/7oxd2Qnvyw0
340, Zeta first job - https://youtu.be/0AnErNRpA18
360, Domino, Doweller or Zeta?? - https://youtu.be/m78BZHu-uuA
426, Portable Bench - https://youtu.be/7OqrljJHOaw
434 , ltralight portable bench - https://youtu.be/oEiiVAiBvt0
408, Festool vs Cheap tool, clamps - https://youtu.be/mG5siTVitUw
182, Festool MFT - https://youtu.be/0V-p5F7SjO4
299, Dog collars & Dominos - https://youtu.be/34xLbnTHv_Y
410, How to fix bad Euro-style hinges - https://youtu.be/Oh_xjMIRN7k
402, Rail square - https://youtu.be/qik-UoZUAgg
424, LR32 MFT top - https://youtu.be/C_J-PKrUo1Y
422, Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square - https://bit.ly/bench-dogs
Trend T4 router - https://amzn.to/3eccbra (US: ??)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Lamello Zeta P2 - https://amzn.to/2Xpu5vB (US: https://amzn.to/2Kufuv1)
Irwin Quick clamp - https://amzn.to/3ecicEc (US: https://amzn.to/3ebcYZv)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Bosch “12v” drill/driver - https://amzn.to/3uWL5KJ (US: (similar) https://amzn.to/3uR0WdP)
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![The Essential Guide to Guiderail Connectors [video 577]](https://i.ytimg.com/vi/fAhSvhD2zEo/hqdefault.jpg "The Essential Guide to Guiderail Connectors [video 577]
In this one I’ll eventually be taking a quick look at the #Festool FSV/2 #guiderail connectors and wether or not they can really be worth the £43 asking price, and we’ll also have a quick history tour of rails and connector Enjoy!
*Edit* In the video I misspoke: the long Festool #LR32 rail is actually 2424mm - still less than the full 2440 - and the Festool 2.4m is 2400.
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
3D Printed Drilling Guide - https://youtu.be/FcD_fYCV4RY
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Everything in this video on one list here - https://amzn.to/4eaUSn6
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Festool FSV clones - https://amzn.to/3VTgmxL
TSO connectors - https://amzn.to/3VMH3nz
Festool FSV/2 - widely available if you google the name. 👍")
