Uploaded August 2024 | Updated September 2026, 29 minutes ago

---

This is the dust collection box I made a few years ago for my chop saw.
It's just 1/2" plywood pocket hole screwed together. There's a 4" dust chute on the bottom, a hose connects to that, as well as the factory dust port on the saw.
I was sick of all the sawdust that would end up on the wall and shelf below my mitre saw, and this helps contain all the dust.

Links below to the hose connection parts I used for the build.
As an Amazon Associate I earn from qualifying purchases.

Full Idea List:
amzn.to/3YRDzC5

4" Hose Quick Disconnect (Male):
amzn.to/46RN2eI

4" Hose Quick Disconnect (Female):
amzn.to/4dOs6rd

2.5" Dust Hose 10 foot:
amzn.to/3AyXgos

4" Dust Hose 20 foot:
amzn.to/3AskKLD

2.5" Hose Ends:
amzn.to/46WUtBl

4" Hose Clamps
amzn.to/46OBau9

4" by 2 1/2" "Y" Fitting:
amzn.to/3X6bB4l

4" Dust Port:
amzn.to/3WQsf6O

Shop Fox Dust Collector (NOT recommended unless you have lots of machines with 4" dust ports)
amzn.to/46Qn0bG