Uploaded February 2018 | Updated November 2026, 1 day ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! What happens when you can’t hear your leader yell “off belay!” An understanding of non-verbal communication is a simple skill, rooted in a few simple, common sense observations, that can add a tremendous amount of safety and efficiency to your climbing partnership.
Perhaps you have learned to use 3 rope tugs to let your belayer know you’re off belay. We’ve used that as well, and found that the “tug method” can be dangerous. For example, the climber’s rope might have just gotten stuck on a flake, tangled in a bush, or caught in a crack, and they had to tug or flick it into a better spot. This can be misinterpreted by a belayer who cannot see or hear the leader.
Here are some thoughts—and perhaps a few new habits—to help you cultivate your sense for non-verbal climbing communication.
1. As the leader, when you arrive at the top of your climb, quickly build your anchor. First try verbally notifying your belayer when you are off belay. Wait a moment to allow your belayer to remove the rope from the belay device, then begin pulling up the rope so fast that the belayer has to consider how it would be possible for the climber to be climbing at such a speed. At this point the belayer can remove the rope from the belay device (often it might require the leader to stop pulling for a moment to allow the belayer to remove the belay device).
Note: When in doubt, you can belay the leader until the rope comes tight on your harness. This is cumbersome and slow, but if you are not 100% sure the leader is safely attached to the new anchor, it may be the safest solution.
2. If the leader falls, the rope will come tight suddenly, and then stop, taught on your belay device.
3. Once the rope is pulled taut to the belayer or anchor, the belayer can count to 10 (or some other agreed upon amount of time) giving the leader enough time to put the follower’s rope on belay from above.
Note: as the follower, you can verify that you are on belay with a simple observation: when you move up, does the rope go tight? The leader can also make this clear by giving a strong, tight belay, especially off the anchor. You can even make this observation before removing your clove hitch or safety attachment from the anchor.
4. Before climbing, discuss your non-verbal communication strategies with your partner. It is common to lose verbal communication on a route, especially if the wind picks up or your partner climbs around a corner and out of ear shot.
5. A technique often used by climbing guides is to stop short in the middle of a pitch if there is an appropriate belay stance. Sometimes the guide book or topo may not label the best belay stance for your climbing team or a wicked windy day. Stopping short can be a great technique for adding a margin of safety, ensuring communication, improving team morale (it’s just nice to see your partner sometimes)—and it underlines the importance of being efficient at belay transitions! See our previous videos on efficient belay transitions.
We hope you found this video helpful.
Please remember, rock climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! What happens when you can’t hear your leader yell “off belay!” An understanding of non-verbal communication is a simple skill, rooted in a few simple, common sense observations, that can add a tremendous amount of safety and efficiency to your climbing partnership.
Perhaps you have learned to use 3 rope tugs to let your belayer know you’re off belay. We’ve used that as well, and found that the “tug method” can be dangerous. For example, the climber’s rope might have just gotten stuck on a flake, tangled in a bush, or caught in a crack, and they had to tug or flick it into a better spot. This can be misinterpreted by a belayer who cannot see or hear the leader.
Here are some thoughts—and perhaps a few new habits—to help you cultivate your sense for non-verbal climbing communication.
1. As the leader, when you arrive at the top of your climb, quickly build your anchor. First try verbally notifying your belayer when you are off belay. Wait a moment to allow your belayer to remove the rope from the belay device, then begin pulling up the rope so fast that the belayer has to consider how it would be possible for the climber to be climbing at such a speed. At this point the belayer can remove the rope from the belay device (often it might require the leader to stop pulling for a moment to allow the belayer to remove the belay device).
Note: When in doubt, you can belay the leader until the rope comes tight on your harness. This is cumbersome and slow, but if you are not 100% sure the leader is safely attached to the new anchor, it may be the safest solution.
2. If the leader falls, the rope will come tight suddenly, and then stop, taught on your belay device.
3. Once the rope is pulled taut to the belayer or anchor, the belayer can count to 10 (or some other agreed upon amount of time) giving the leader enough time to put the follower’s rope on belay from above.
Note: as the follower, you can verify that you are on belay with a simple observation: when you move up, does the rope go tight? The leader can also make this clear by giving a strong, tight belay, especially off the anchor. You can even make this observation before removing your clove hitch or safety attachment from the anchor.
4. Before climbing, discuss your non-verbal communication strategies with your partner. It is common to lose verbal communication on a route, especially if the wind picks up or your partner climbs around a corner and out of ear shot.
5. A technique often used by climbing guides is to stop short in the middle of a pitch if there is an appropriate belay stance. Sometimes the guide book or topo may not label the best belay stance for your climbing team or a wicked windy day. Stopping short can be a great technique for adding a margin of safety, ensuring communication, improving team morale (it’s just nice to see your partner sometimes)—and it underlines the importance of being efficient at belay transitions! See our previous videos on efficient belay transitions.
We hope you found this video helpful.
Please remember, rock climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!










![Alpine & Mountaineering: 1. Ice Axe Positions | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we review considerations for ice axe positions. The ice axe is the symbol of mountaineering. When used correctly, it can be one of the most versatile tools a climber employs in the mountains.
There are many ways the ice axe is used and held to help climbers with ascending and descending snow and ice. When and where to choose these different hand positions depends on:
- Ability and/or desired security
- Firmness of the snow
- Steepness of the slope
- Consequences of a slip and fall
Below are the various ice axe positions used in alpine & mountaineering:
Cane - On relatively flat terrain, or with gentle slopes such as glaciers and snowfields, its best to use the axe in the “cane position.” As it sounds, hold the axe on top of the head, with fingers wrapped around the pick and the adze. The shaft and the spike are placed on the mountain surface, and the whole tool is used like a walking cane.
Self Arrest - The classic “self arrest” position is similar to the cane position, but the axe is always held in the uphill hand with the adze facing forward. This position helps you swiftly self arrest while climbing. Please see our other video on “The Self-Arrest].
Dagger - When the terrain gets steeper and firmer such as with neve snow, climbing using the “dagger” position is a secure and speedy technique. The axe can be held just under the head on the shaft, or with fingers wrapped around the head, with the adze resting in the saddle between the thumb and pointer finger and the pick facing into the slope. Plunge the pick into the snow and keep the lower part of the shaft flat against the slope, then move your feet up and repeat.
Belay - On steep, softer snow, the ice axe “belay” position can offer very secure climbing. Hold the axe on the head, one hand on the pick, and the other had on the adze. Plunge the shaft of the axe as far as you can in the snow to create a fairly solid anchor. Then move the feet up and repeat.
Hammer - Finally, the “hammer position” is most often used with vertical ice climbing tools or a set of ice axes in very steep snow or ice. Hold the axe low on the shaft just above the spike. Drive the pick of the axe into the slope using a hammer swinging motion over your head.
Note:
In this Alpine & Mountaineering video series section, we discuss carrying only one ice axe. It is therefore called an ice axe. A “piolet” is a more technical form of ice axe, which is sort of a hybrid of the two axe types used on many alpine routes. Once we enter into our Ice Climbing video series, notice how we describe waterfall ice axes (typically used as a pair) as “ice tools”, and not ice axes. Pedantic, but correct!
We hope you found this video helpful.
Please remember, climbing and mountaineering inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Alpine & Mountaineering: 1. Ice Axe Positions | Climbing Tech Tips](https://i.ytimg.com/vi/6TtDf1DD_ig/mqdefault.jpg)