Uploaded December 2023 | Updated November 2026, 2 hours ago
Waiting on some new boards from PCBWay.com/?from=atomic so thought I'd have a look at these interesting addressable LED curtains.
They are pretty cool - what's really interesting is that they operate with the data line in a bus mode - all the LEDs get the serial data and each one has an address burned into it at manufacture time so they know which part of the data stream is for them.
Very clever stuff.
But we're not here to praise this product - we're here to take it apart and see if we can hack around with it. In this case the answer is a definite yes!
These are the curtains that I purchased: https://s.click.aliexpress.com/e/_DFQ98jB
"New Generation DIY LED Curtain Lights Steady Lit APP Remote Control Pattern Cartoon Text For Window Festival Wedding Decoration" - Is how they describe it...
And the interesting GitHub thread is here: github.com/Aircoookie/WLED/issues/1312
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com
Waiting on some new boards from PCBWay.com/?from=atomic so thought I'd have a look at these interesting addressable LED curtains.
They are pretty cool - what's really interesting is that they operate with the data line in a bus mode - all the LEDs get the serial data and each one has an address burned into it at manufacture time so they know which part of the data stream is for them.
Very clever stuff.
But we're not here to praise this product - we're here to take it apart and see if we can hack around with it. In this case the answer is a definite yes!
These are the curtains that I purchased: https://s.click.aliexpress.com/e/_DFQ98jB
"New Generation DIY LED Curtain Lights Steady Lit APP Remote Control Pattern Cartoon Text For Window Festival Wedding Decoration" - Is how they describe it...
And the interesting GitHub thread is here: github.com/Aircoookie/WLED/issues/1312
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com

![DIY eBook Reader - Build your own Kindle using an ESP32
Ive been busy playing with another ESP32 based e-Paper display. Once again were sponsored by PCBWay - https://www.PCBWay.com/?from=atomic
There are some interesting aspects to this project:
Were using deep sleep to save on battery - check out my recent video on this subject for a deep dive: https://youtu.be/YOjgZUg_skU
Were also using an SD Card in SPI mode using a few of the spare GPIO pins on the board - weve covered this previously in this video: https://youtu.be/bVru6M862HY
Parsing, layout out and rendering ePub files is pretty interesting. Its a good challenge to try and get this working nicely on embedded devices like the ESP32.
[0:00] Introduction/demo
[1:07] ePub format overview
[1:34] Whats inside an ePub file?
[1:49] The content.opf file
[2:20] ePub components
[2:32] Challenges
[2:55] Getting ePub files onto the device
[3:08] Touch screen failure
[3:24] Listing files on an SD Card
[3:33] Enabling long files names in the ESP-IDF
[3:51] Reading ZIP archives on the ESP32
[4:15] Parsing the content.opf file to get the book structure
[4:56] Should we build a web browser?
[5:34] Parsing the XHTML content
[5:52] Laying out the content
[7:28] Deep sleep
[7:41] Show me the code!
Everything is on GitHub here: https://github.com/atomic14/diy-esp32-epub-reader
If youve got an ESP32 based ePaper display then please give it a go!
You can get the LilyGO board Im using from here: https://s.click.aliexpress.com/e/_9u8DGd (affiliate link)
Patreon: https://www.patreon.com/atomic14
ko-fi: https://ko-fi.com/atomic14 DIY eBook Reader - Build your own Kindle using an ESP32](https://i.ytimg.com/vi/VLiCgB0odOQ/mqdefault.jpg)








![Mastering ESP32 Deep Sleep: Timers, GPIOs & Touch Sensors Explained
Were doing a deep dive into deep sleep! Thanks to PCB Way for sponsoring the videos - https://www.PCBWay.com/?from=atomic
The ESP32 e-Paper weather display lasted exactly 2 months on its 1000mAh battery. It achieves this by spending most of its time in deep sleep, only waking up every 30 minutes to get a fresh forecast and update the display.
Were going to look at:
[0:00] Intro
[1:33] How to get into deep sleep
[1:42] Waking up by using a timer
[2:56] Waking up by GPIO pins (single and multiple)
[5:26] Waking up with the touch sensors
[6:13] How to know why you were woken up?
[7:37] How to persist state during deep sleep?
[8:24] How much current do we use in deep sleep?
Its pretty interesting stuff and opens up some great possibilities.
Sample code for this video is here: https://github.com/atomic14/esp32_deep_sleep
Heres a link to one of @AndreasSpiess videos (the guy with the Swiss accent) https://www.youtube.com/watch?v=ajt7vtgKNNM hes got a bunch more videos measuring different ESP32 boards - definitely worth having a watch.
Patreon: https://www.patreon.com/atomic14
ko-fi: https://ko-fi.com/atomic14 Mastering ESP32 Deep Sleep: Timers, GPIOs & Touch Sensors Explained](https://i.ytimg.com/vi/YOjgZUg_skU/mqdefault.jpg)