Uploaded February 2026 | Updated November 2026, 4 days ago
Thanks to PCBWay.com/?from=atomic for the fantastic PCBs and SMT assembly.
We recently repaired a broken AmazonBasics microSD adapter, and a few people in the comments pointed out that these are “built to a price” and probably not the highest quality.
That got me curious.
So in this video, I crack open a cheap AmazonBasics microSD adapter and compare it directly with a branded SanDisk adapter to see what’s actually different on the inside.
Under the microscope, the two designs turn out to be surprisingly different — from how the contacts are made, to how the SD card actually presses against them.
Is the branded one really better?
Or is the cheaper one good enough?
There’s no benchmarking or speed testing here — this is purely a mechanical and construction teardown, looking at:
Contact design and robustness
How the SD card mates with the pins
Potential failure points
Whether “built to a price” really shows up inside
Let me know what you think in the comments — which design would you trust more?
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com
Thanks to PCBWay.com/?from=atomic for the fantastic PCBs and SMT assembly.
We recently repaired a broken AmazonBasics microSD adapter, and a few people in the comments pointed out that these are “built to a price” and probably not the highest quality.
That got me curious.
So in this video, I crack open a cheap AmazonBasics microSD adapter and compare it directly with a branded SanDisk adapter to see what’s actually different on the inside.
Under the microscope, the two designs turn out to be surprisingly different — from how the contacts are made, to how the SD card actually presses against them.
Is the branded one really better?
Or is the cheaper one good enough?
There’s no benchmarking or speed testing here — this is purely a mechanical and construction teardown, looking at:
Contact design and robustness
How the SD card mates with the pins
Potential failure points
Whether “built to a price” really shows up inside
Let me know what you think in the comments — which design would you trust more?
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com



![Mastering ESP32 Deep Sleep: Timers, GPIOs & Touch Sensors Explained
Were doing a deep dive into deep sleep! Thanks to PCB Way for sponsoring the videos - https://www.PCBWay.com/?from=atomic
The ESP32 e-Paper weather display lasted exactly 2 months on its 1000mAh battery. It achieves this by spending most of its time in deep sleep, only waking up every 30 minutes to get a fresh forecast and update the display.
Were going to look at:
[0:00] Intro
[1:33] How to get into deep sleep
[1:42] Waking up by using a timer
[2:56] Waking up by GPIO pins (single and multiple)
[5:26] Waking up with the touch sensors
[6:13] How to know why you were woken up?
[7:37] How to persist state during deep sleep?
[8:24] How much current do we use in deep sleep?
Its pretty interesting stuff and opens up some great possibilities.
Sample code for this video is here: https://github.com/atomic14/esp32_deep_sleep
Heres a link to one of @AndreasSpiess videos (the guy with the Swiss accent) https://www.youtube.com/watch?v=ajt7vtgKNNM hes got a bunch more videos measuring different ESP32 boards - definitely worth having a watch.
Patreon: https://www.patreon.com/atomic14
ko-fi: https://ko-fi.com/atomic14 Mastering ESP32 Deep Sleep: Timers, GPIOs & Touch Sensors Explained](https://i.ytimg.com/vi/YOjgZUg_skU/mqdefault.jpg)






