MOSFETs and Transistors with Arduino @Dronebotworkshop
MOSFETs and Transistors with Arduino  @Dronebotworkshop
Uploaded November 2019 | Updated November 2026, 36 minutes ago
Today we will learn how to use Transistors and MOSFETs to enable our Arduino to switch high-current DC loads, including a 12-volt RGB LED Strip Light.

Article at dronebotworkshop.com/transistors-mosfets
More tutorials and projects at dronebotworkshop.com
Chat on the Forum at forum.dronebotworkshop.com
Join the newsletter - dronebotworkshop.com/subscribe

Transistors are the basic building block of modern electronics. Just about everything uses transistors, including the Arduino itself.

Using a power transistor or MOSFET we can drive high-current devices using the logic-level outputs from our Arduino. Today we’ll learn to use both devices.

We will start with a simple transistor switch, you’ll see how easy it is to switch a high-current DC lamp using a popular power transistor.

Inductive loads like motors and relays present an additional challenge, as these devices generate a “back-EMF” that we need to deal with. We’ll use a diode to take care of the back-EMF and build a simple motor speed controller.

We will then turn our focus to MOSFETs. MOSFETs have a number of advantages over standard transistors. We will learn how to use popular MOSFET modules to control an RGB LED Strip in a simple but colorful experiment.

Here is what is in today's video:

00:00 - Introduction
02:49 - Transistors and MOSFETs
16:23 - Transistor Switching Demo
22:54 - Transistor Motor Control
29:52 - MOSFET RGB LED Strip Light Control

Please note that transistors and MOSFETs are great for controlling DC loads, but not AC. I’ll be showing you how to control AC loads in a future video.
MOSFETs and Transistors with ArduinoBuild a Simple Power SupplyRCWL-0516 Microwave Proximity Sensor - With & Without ArduinoPower For Your Electronics Projects - Voltage Regulators and ConvertersLSM303AGR eCompassTB6612FNG H-Bridge Motor Controller - Better than L298N?Raspberry Pi Autofocus Camera & libcameraESP32 Boards Manager 3 - Upgrade your Older CodeEthernet & Power-over-Ethernet with ESP32 - Build a PoE Camera and a Web ServerGetting Started with PlatformIORGB LEDs with Arduino - Standard & NeoPixelMeasuring Carbon Dioxide - CO₂ & eCO₂ Sensors
DroneBot Workshop |

MOSFETs and Transistors with Arduino

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER