RGB LEDs with Arduino - Standard & NeoPixel @Dronebotworkshop
RGB LEDs with Arduino - Standard & NeoPixel  @Dronebotworkshop
Uploaded April 2018 | Updated November 2026, 3 hours ago
Learn to use RGB LEDs with an Arduino. We'll cover both standard and NeoPixel varieties.

Article with code at dronebotworkshop.com/rgb-leds
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe

RGB or Red Green Blue LEDs are useful little devices that can add a splash of color to your Arduino projects. Today we will learn how RGB LEDs work, how addressable RGB LEDs (also called NeoPixels) operate, and how we can incorporate them into our Arduino designs.

We start with a bit of color theory that explains how the primary colors red, green and blue can be used to create almost any color in the rainbow.

Next, we’ll look at conventional RGB LEDs, both common anode and common cathode. I’ll show you how to calculate the correct value for the dropping resistors you’ll need to work with these devices.

Then we’ll hookup a common anode and a common cathode RGB LED to an Arduino. Using three potentiometers we will control the intensity of the red, green and blue light to create custom colors.

After that, we will move on to working with the WS2812 addressable RGB LED, also known as a NeoPixel. I’ll show you how they differ from conventional RGB LEDs and how you can “daisy chain” them together to allow you to drive multiple RGB LEDs using a single Arduino I/O port.

Of course, we will then run some code to produce a colorful light display using multiple NeoPixel LEDs.

Here is the Table of Contents for this video:

00:00 - Introduction
03:00 - Understanding Color
06:59 - Basic RGB LEDs
07:57 - Calculating Dropping Resistors
11:43 - RGB LED Demo
14:38 - RGB LEDs with Arduino
25:15 - NeoPixel (WS2812) RGB LEDs
30:15 - Using NeoPixels with Arduino

RGB LEDs have a lot of uses. They can be used for status indicators, custom lighting effects, and even as video displays.

I hope you enjoy this colorful episode. As always you can get more details and all the code on the article.
RGB LEDs with Arduino - Standard & NeoPixelMeasuring Carbon Dioxide - CO₂ & eCO₂ SensorsArduino Nano 33 IoT - Getting StartedArduino Programming with XOD - Learning XODRaspberry Pi Cameras - The BIG PictureArduino Color Sensors - TCS230 & ISL29125Raspberry Pi Remote Camera with motionEyeOS - Build a Surveillance SystemIR Remotes & Microcontrollers - Arduino & ESP32How does the LD2410C know you are HUMAN?Dual Boot Workstation - Windows 11 & Ubuntu 22.04Using SD Cards with Arduino - Record Servo Motor MovementsBuild a Real Robot Episode 8 - Motor Controller Part 1
DroneBot Workshop |

RGB LEDs with Arduino - Standard & NeoPixel

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER