Uploaded September 2021 | Updated September 2026, 1 week ago
Today I will try to cast the ducati logo again. This is turning out to be my learning cast as this will be the 6th time I will try this cast. So far my 4th cast was a big succes. I am trying to recreate that cast. As I now know I need more pressure on my metal inside the mold to fill up all parts, I improved some features to my mold. I added taller sprues and the pouring sprue is smaller in diameter than the outlet sprue. I geuss I have enough pressure with this set up :)
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
See you next week!
The Furnaces I use: FB1SB Devil Forge 4kg
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!
Today I will try to cast the ducati logo again. This is turning out to be my learning cast as this will be the 6th time I will try this cast. So far my 4th cast was a big succes. I am trying to recreate that cast. As I now know I need more pressure on my metal inside the mold to fill up all parts, I improved some features to my mold. I added taller sprues and the pouring sprue is smaller in diameter than the outlet sprue. I geuss I have enough pressure with this set up :)
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
See you next week!
The Furnaces I use: FB1SB Devil Forge 4kg
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!
