Uploaded January 2022 | Updated November 2026, 4 hours ago
David Holcomb presents his collaboration with George Flanagan, and Mike Poore: "MSR Fuel Salt Qualification Guidance Development" at the 2021 Oak Ridge National Laboratory / GAIN Molten-Salt Reactor Workshop. ("ORNL-GAIN MSR Workshop".)
Slide deck: msrworkshop.ornl.gov/wp-content/uploads/2021/11/25_Holcomb_FuelQualification_MSRworkshop.pdf
Fuel qualification is a process which provides high confidence that physical and chemical behavior of fuel is sufficiently understood so that it can be adequately modeled for both normal and accident conditions, reflecting the role of the fuel design in the overall safety of the facility. Uncertainties are defined so that calculated fission product releases include the appropriate margins to ensure conservative calculation of radiological dose consequences.
Liquid salt fuel serves as nuclear fuel and primary heat transfer media. It must meet requirements for both purposes.
Solid Fuel:
- Mechanically damageable
- Composition set prior to use
- Properties depend on fabrication process
Liquid Fuel:
- Chemically damageable - may be repairable during use
- Composition may be adjustable during use
- Properties depend on composition and state
- Container breach could release nearly all radionuclides
Common Salt Properties and Plant Functions Enable a General Liquid Fuel Salt Evaluation Method
- Specific accident sequences are design dependent
- Basic operational and safety functions are common to any nuclear power plant
- Halide salt characteristics are common to any MSR... High boiling points (low pressure). Low Gibbs free energy (low chemical potential energy). Natural circulation heat transfer properties.
- Fuel salt interacts with its container layers via common chemical and physical mechanisms, for example via thermal energy transfer, chemical reactions, and mechanical processes.
This ORNL presentation could originally be found here:
msrworkshop.ornl.gov/msr2021
Audio has been boosted and some delays removed. Playlist of such ORNL MSRW 2021 edited videos can be found here: youtube.com/playlist?list=PLuGiwaUJYEZf1HYXPSGr58ieHNMCjXJxF
David Holcomb presents his collaboration with George Flanagan, and Mike Poore: "MSR Fuel Salt Qualification Guidance Development" at the 2021 Oak Ridge National Laboratory / GAIN Molten-Salt Reactor Workshop. ("ORNL-GAIN MSR Workshop".)
Slide deck: msrworkshop.ornl.gov/wp-content/uploads/2021/11/25_Holcomb_FuelQualification_MSRworkshop.pdf
Fuel qualification is a process which provides high confidence that physical and chemical behavior of fuel is sufficiently understood so that it can be adequately modeled for both normal and accident conditions, reflecting the role of the fuel design in the overall safety of the facility. Uncertainties are defined so that calculated fission product releases include the appropriate margins to ensure conservative calculation of radiological dose consequences.
Liquid salt fuel serves as nuclear fuel and primary heat transfer media. It must meet requirements for both purposes.
Solid Fuel:
- Mechanically damageable
- Composition set prior to use
- Properties depend on fabrication process
Liquid Fuel:
- Chemically damageable - may be repairable during use
- Composition may be adjustable during use
- Properties depend on composition and state
- Container breach could release nearly all radionuclides
Common Salt Properties and Plant Functions Enable a General Liquid Fuel Salt Evaluation Method
- Specific accident sequences are design dependent
- Basic operational and safety functions are common to any nuclear power plant
- Halide salt characteristics are common to any MSR... High boiling points (low pressure). Low Gibbs free energy (low chemical potential energy). Natural circulation heat transfer properties.
- Fuel salt interacts with its container layers via common chemical and physical mechanisms, for example via thermal energy transfer, chemical reactions, and mechanical processes.
This ORNL presentation could originally be found here:
msrworkshop.ornl.gov/msr2021
Audio has been boosted and some delays removed. Playlist of such ORNL MSRW 2021 edited videos can be found here: youtube.com/playlist?list=PLuGiwaUJYEZf1HYXPSGr58ieHNMCjXJxF

![Emmanuel Macron (President of France) on Nuclear and 100% Renewable Energy
German Chancellor Angela Merkel is waging a war on nuclear power across Europe. German carbon reductions have stalled since their attempt to move to 100% renewable (intermittent) energy, yet they are exerting pressure on other nations to shut down their nuclear power plants!
To anyone concerned about climate change, and aware of nuclear powers lack of carbon emissions, this is insane. Replacing reliable carbon-free energy with intermittent (so only fractionally) carbon-free energy only serves to stall carbon reduction.
Dr. James Hansen and French President Emmanuel Macron state the obvious: nuclear power is required to fight climate change.
We have to phase out carbon emissions at the rate of several percent a year I dont see any way we can do that without the help of nuclear power. - Dr. James Hansen
Nuclear is NOT bad for CO2 emissions. Even today with renewables, [nuclear is] the most de-carbonized way to produce electricity. - President Emmanuel Macron
The people who argue for 100% renewables think that if we can go from 0% to 10% to 20% renewable then were on the way and well get to 100%. well it is actually HARDER NOT EASIER because of the intermittency of the renewables. - Dr. James Hansen
Im closing a nuclear power plant tomorrow. Its NOT true that I can replace it with renewables. Why? Because nuclear provides us with electricity continuously all year round. Renewables are intermittent energy. - President Emmanuel Macron
Created for use in: http://ThoriumRemix.com/
Emmanuel Macron interview aired 2017-12-17 here:
https://www.france.tv/france-2/journal-20h00/364055-entretien-du-president-de-la-republique.html Emmanuel Macron (President of France) on Nuclear and 100% Renewable Energy](https://i.ytimg.com/vi/sWDZq3-f1m4/mqdefault.jpg)








