Liquid-Fuel Molten Salt Reactor Design Safety Standard (ANS 20.2) - David Holcomb @ ORNL MSRW 2021 @ThoriumRemix
Liquid-Fuel Molten Salt Reactor Design Safety Standard (ANS 20.2) - David Holcomb @ ORNL MSRW 2021  @ThoriumRemix
Uploaded January 2022 | Updated November 2026, 2 days ago
Dr. David Holcomb presents "Liquid-Fuel Molten Salt Reactor Design Safety Standard (ANS 20.2) Overview" at Oak Ridge National Laboratory's Molten-Salt Reactor Workshop on 2021-10-13.

David Holcomb is Chair of the American Nuclear Society’s Working Group on Developing an MSR Design Safety Standard.

msrworkshop.ornl.gov/wp-content/uploads/2021/11/27_Holcomb_ANS20_2overview_v2.pdf

Draft Standard Increases Safety Adequacy Design and Evaluation Efficiency and Predictability
• Existing body of regulations and safety evaluation methods are based upon the characteristics of the existing fleet of LWRs
– MSRs represent a substantial technological departure from LWRs
– Cumbersome to evaluate the safety of each new MSR design based upon customized exceptions to existing practice
• Safety principles are the same for any nuclear plant
• MSR focused design safety standard
– Preserves and translates existing safety principles to MSRs – Addresses MSR specific issues

ANS 20.2 Provides MSR Class Specific Design Criteria That Embody the Safety Objective of Each of the GDCs
• Each GDC sequentially evaluated for applicability to MSRs
– GDC directly adopted when fully relevant (e.g., quality assurance)
– ARDC adopted in cases where it provides better match to MSR characteristics
– SFR or MHTGR design criteria adopted where they more closely match MSR characteristics
• Additional criteria reflective of the distinctive characteristics of MSRs added to set of criteria
– For example, criterion added to address safety issue of coolant activation due to proximity to the neutron field
• Each MSR-DC provides rationale for adaption to GDC
– for example, Rationale for Adaption to GDC: Derived from ARDC. “Coolant boundary” has been relabeled “fuel salt boundary” to reflect the difference between MSRs and other advanced reactors.

ThoriumRemix.com Thorium & MSR & Nuclear assets used in Thorium Remix project.
Liquid-Fuel Molten Salt Reactor Design Safety Standard (ANS 20.2) - David Holcomb @ ORNL MSRW 2021Robert Bryce - Strategies for Improving Critical Energy Infrastructure - Subcommittee on Gov. OpsNuclear Power is Low-Carbon EnergyKairos Power Overview (October 2021) - Brandon Haugh @ ORNL MSRW 2021Melissa Rose of Argonne - Supporting a FOAK MSR by 2035 @ ORNL MSRW 2023Andreas Norlin - Closing ThEC2018 (Thorium Energy Conference 2018) An Event to Power the WorldSimulation of Heat and Mass Transport in Molten-Salt Reactors by Rui Hu @ ORNL MSRW 20213h47m15s16f NoMusic - Half-Lives of Nuclear Fuels - Th-232, U-235, U-238 are Radioactive - TR2016aMELCOR Non-LWR Modeling and Simulation Capabilities - Dave Luxat @ ORNL MSRW 2021Thorium 2017 - Part 92022 Nuclear Wins - Eric Meyer of Generation Atomic @ TEAC11Thomas Fuerst: Tritium Transport in Molten-Salt Reactors @ ORNL MSRW 2022
Thorium Remix |

Liquid-Fuel Molten Salt Reactor Design Safety Standard (ANS 20.2) - David Holcomb @ ORNL MSRW 2021

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER