Uploaded May 2019 | Updated November 2026, 3 hours ago
Hey there, and thanks so much for checking out our quick beginner tutorial video on how to start mixing great sounding live drum tracks!
Whether you’re mixing rock, blues, country or any other style of music, this easy lesson is guaranteed to provide tips and tricks for getting your drum mix sounding pro. This video is perfect for producers and mixing engineers of any level, from beginner to pro.
We will be working in Presonus Studio One 4, and using plugins from Softube, including the revolutionary Softube Console 1 mixing plugin control surface. Even if you’re not using Studio One or Softube Console 1, you can follow along with these simple steps in any DAW and using any plugins of your choice.
If you’re not familiar with the Console 1, you can check out our review of this game-changing piece of gear here: youtu.be/HyxRmUegj0A
And if you’d like to know more about this amazing DAW, we will soon have a full review of Studio One 4 as well as a beginner tutorial here on the channel, so be sure to subscribe.
Be sure to check out our website and join our ever-growing community of music lovers at consordini.com
Or check us out on Facebook - facebook.com/Consordini
Or visit us on Instagram - instagram.com/consordini
Drums are the heartbeat of almost every style of music in the world. Because of the advent of software instruments, many engineers don’t often get the opportunity to practice mixing a live drum kit. Because of this, it can be very intimidating and confusing to work on mixing a full kit.
We often record drum kits with a lot of microphones - spot mics on the top and bottom of the snare drum, mics for each tom, mics on the kick drum, overheads, room mics… there’s usually a lot going on. If you’re unfamiliar with working with so many mics for a single element of a song, it can get overwhelming fast.
But in this simple mixing tutorial video, we take you through the process of getting a great drum sound in a simple step-by-step way that is guaranteed to make mixing drums a breeze.
The most important thing to keep in mind through the whole process is the role of each part of the drum set and its corresponding microphone. In the video, we go through each element and discuss what it’s doing, why, and how to get it to sound its best.
It can be easy to over-mix drums and apply too many effects to each element. While this can sound good with each mic soloed, when you bring them all together you can encounter problems with balance and overall tone.
Following along with our simple video tutorial will help prevent this common problem. We will walk you through an easy workflow that will get your drums sounding full, rich and natural every time.
If you’re not working with Studio One or Softube Console 1, that’s OK - these steps can be followed in any major DAW, including Pro Tools, Logic Pro X, Cubase, Nuendo, Reaper, Garage Band, Audacity, FL Studio, or Ableton.
You can use plugins from any manufacturer, including Waves, Slate Digital, McDSP, or anything else. The important thing is understanding the fundamentals of how to use EQ, compression, gating, and other basic audio tools to get your drums sounding great.
Whether you’re a beginner, intermediate or expert engineer or producer, this mixing lesson is guaranteed to get your drum mixes sounding more polished, consistent and professional.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado. I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini. Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music. Thanks for watching!
#consordini #drums #mixing
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
Hey there, and thanks so much for checking out our quick beginner tutorial video on how to start mixing great sounding live drum tracks!
Whether you’re mixing rock, blues, country or any other style of music, this easy lesson is guaranteed to provide tips and tricks for getting your drum mix sounding pro. This video is perfect for producers and mixing engineers of any level, from beginner to pro.
We will be working in Presonus Studio One 4, and using plugins from Softube, including the revolutionary Softube Console 1 mixing plugin control surface. Even if you’re not using Studio One or Softube Console 1, you can follow along with these simple steps in any DAW and using any plugins of your choice.
If you’re not familiar with the Console 1, you can check out our review of this game-changing piece of gear here: youtu.be/HyxRmUegj0A
And if you’d like to know more about this amazing DAW, we will soon have a full review of Studio One 4 as well as a beginner tutorial here on the channel, so be sure to subscribe.
Be sure to check out our website and join our ever-growing community of music lovers at consordini.com
Or check us out on Facebook - facebook.com/Consordini
Or visit us on Instagram - instagram.com/consordini
Drums are the heartbeat of almost every style of music in the world. Because of the advent of software instruments, many engineers don’t often get the opportunity to practice mixing a live drum kit. Because of this, it can be very intimidating and confusing to work on mixing a full kit.
We often record drum kits with a lot of microphones - spot mics on the top and bottom of the snare drum, mics for each tom, mics on the kick drum, overheads, room mics… there’s usually a lot going on. If you’re unfamiliar with working with so many mics for a single element of a song, it can get overwhelming fast.
But in this simple mixing tutorial video, we take you through the process of getting a great drum sound in a simple step-by-step way that is guaranteed to make mixing drums a breeze.
The most important thing to keep in mind through the whole process is the role of each part of the drum set and its corresponding microphone. In the video, we go through each element and discuss what it’s doing, why, and how to get it to sound its best.
It can be easy to over-mix drums and apply too many effects to each element. While this can sound good with each mic soloed, when you bring them all together you can encounter problems with balance and overall tone.
Following along with our simple video tutorial will help prevent this common problem. We will walk you through an easy workflow that will get your drums sounding full, rich and natural every time.
If you’re not working with Studio One or Softube Console 1, that’s OK - these steps can be followed in any major DAW, including Pro Tools, Logic Pro X, Cubase, Nuendo, Reaper, Garage Band, Audacity, FL Studio, or Ableton.
You can use plugins from any manufacturer, including Waves, Slate Digital, McDSP, or anything else. The important thing is understanding the fundamentals of how to use EQ, compression, gating, and other basic audio tools to get your drums sounding great.
Whether you’re a beginner, intermediate or expert engineer or producer, this mixing lesson is guaranteed to get your drum mixes sounding more polished, consistent and professional.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado. I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini. Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music. Thanks for watching!
#consordini #drums #mixing
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
![Mixing HIP HOP Chorus, Adlibs and Background Vocals Tutorial [Full Version]
This tutorial is going to explain some mixing fundamentals and help make home recording made easy. I believe that anyone can produce like a pro .
Mixing in the studio and getting a professional sound starts with two things. The right mixing technology and knowing how to use it. This tutorial will show you how to mix hip-hop vocals in Studio One and more.
Mixing hiophop vocals will be easier when you understand modern mixing techniques using the Studio One! From vocal compression to mixing samples to mixing demos it is covered in this video.
The vocal mixing tips will help you master the Studio One and get the results you can be proud of in the music studio.
Vocal Mixing Techniques.
Using Studio One like a pro starts with understanding the basics. There are certain things that you can do that will help you maximize the hip hop vocalists natural talents or lack thereof.
This music engineering tutorial focuses on the basics so you have the foundation to build on.
From recording ad libs to reducing the harshness of vocals this tutorial covers it all. Perfecting recording techniques and mastering mixing does not happen over night.
You start out like everyone else does with the basics and they you tweak that skill set to develop your own sound. Studio One practice will lead to Studio One mastering.
You can maximize hip hop vocals with the right layering technique. This tutorial will show you how to edit and comp vocals to get the best sound.
Using Compression.
With hip hop vocals especially you will get a lot of loud vocals and a lot of indiscernible vocals, compression of the vocals is how you get the even sounds that are pleasing to the ear.
Layering, compression and parallel processing is key to any vocals but especially true of hip hop vocal editing and mixing.
Compression is used to help keep your sound consistent. It can brighten up the background vocals as well.
It can tone down the loud while amping up the quiet words to give you a more even consistent sound across the board.
Before You Start Mixing.
Hands down it is easier to get your beat down before you add vocals to the mix.
It can be tempting to stay focused on the vocals but it is always better to get your background beat out of the way before you move to vocals, chorus and background work.
This tutorial goes over all that you will need to do before you get to the meat and potatoes of the vocals.
Once you have your beat down it is time to move forward with the vocals. The first thing you need to address is the volume of the vocals.
Is it washed out by the beat? Does it over power the beat? The sweet spot is somewhere in between and will give each its own place to shine.
Controlling volume is how you will give each layer its do! The right volume through compression will enhance the overall sound of the mix.
Layering.
Once you have gone through the process of getting the beat right, getting the vocal volume right and to a place where they are complementing each other, you still have some work to do.
Perfection rarely occurs without layering.
Layering is where the real magic happens. If you are new to layering it is a relatively easy process. First, keep in mind that you want to save all the tracks that you recorded.
Hopefully you have watched some of the earlier video tutorials about using Studio One for mixing and have followed the directions to organize your setup so you can easily pull down old tracks.
Next you want to take the other tracks that you have of the same recording and number them according to your preference. So in a nutshell, you should have 10 or more tracks of the same song numbered to indicate which takes you are pleased with.
Layering is the process of takin different takes of the same vocals and adding them together. What you get is a much more fuller sound that is pleasing to the ear. Layering adds depth and is a great way to highlight vocals.
Of course there are a few problems with layering that may instigate you to want to chop it to pieces during editing but you do want to move with caution.
What I do is record listen, than contemplate it, and finally take a few minute break then relisten to it before I start chopping up that second layer.
One of the main reasons layering is frequently used is because it fills in the frequencies and delivers a fuller vocal experience. Layering also helps to cover up some errors in the primary vocals.
Of course, there are some down sides to layering like it sucks up more space on your hard drive. It is a task that takes some practice to get a natural sound from.
Keep It Simple.
When you are mixing vocals or beats you want to be able to keep things simple so you can put your focus where it is needed.
Watch this video and learn how you can mix and master using the Studio One!
#consordini #mixing
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Mixing HIP HOP Chorus, Adlibs and Background Vocals Tutorial [Full Version]](https://i.ytimg.com/vi/n9uF4LG0wM4/mqdefault.jpg)
![Audio-Technica ATH-M50X Review [With Full Specifications]
In this video, well go over the mid-range option from Audio-Tehnica, the Audio-Technica ATH-M50X professional monitoring headphones.
If you’re interested in purchasing Audio-Technica ATH-M50X, you can do so here with a great price: https://imp.i114863.net/g0qD5
The ATH-M50X is one of the more covered sets of headphones out there, based on their build and sound quality and the package you get with the purchase.
The M50X headphones come at around a £100 ($149) and come in a very nice package, including the M50 headphones, 2 different cables, one being a 1.2-meter straight cable and the other a 1.2 to 3-meter coiled cable, also, a 1/4 screw-on adapter and a nice carrying bag.
So having the Audio Technica ATH-M50X price in mind, sounds like a steal.
The available ath m50x colors alow for customisation, anywhere from a simple, clean fully blacked-out headset to a more stylish brown leather, which gives the mth 50x some real character.
The ATH-M50 have a decent set of specifications: the Audio Technica ATH-M50x frequency range is a 15 to 28,000 Hz, with a driver diameter of 45mm, sensitivity of 99dB and the maximum input power of 1,600 mW at 1 kHz.
The sound quality has been praised year after year and the Audio Technica ATH-m50x specs proved its value, becoming one of the more prominent choices when it comes to professional monitoring headphones, gathering somewhat of a cult following.
The ATH M50 X also prove to be very comfortable to use. At the weight of around 285g., it doesnt weight on the ears until a prolonged amount of use, having nice sound isolation and a nice feel, due to high quality and circumaural design of the cups of the headphones.
The two detachable cables that come with the Audio-Technica ATH-M50X professional studio monitor headphones easily attach and detach from the headset itself making it easy to travel with these headphones.
The AT M50x straight cable comes in handy in a regular static setup and the coiled cable comes helpful if you ever need that extra space to move around and the 1/4 adapter lets you work with almost any modern setup you would encounter, so you dont have to worry with the Audio-Technica ATH-M50.
As the Audio Technica ATH M50X headphones are the mid-range offering from Audio Technica, its important to understand what other options are out there from the same line before committing to a set of headphones.
At the lower end, for half of the price of the ATH M50X, Audio Technica offers the ATH-30X, which although comes in a similar package, the cable is not detachable and the sound quality suffers due to it having a 40mm driver, which is smaller than the Audio Technica M50.
On the other side of the spectrum, theres the M60X, which is almost a 100g lighter and 3dB more sensitive, but for further differences from the ATH 50 would be recommended to try out, if possible, to see what choice is more optimal, the mx50 headphones, or the more expensive option on the list.
In this Audio Technica M50X review, we go over how these headphones change over the couple of years you might end up using them and the most noticeable change is the difference in sound isolation.
At the start of using these headphones, its wonderful, any noise bleed from the outside is barely audible unless you use the headphones on a really low volume in which case the outside noise is still barely noticeable.
But the issue arises when it comes to the noise bleeding out of the headphones, which is not that noticeable but over a few years, because of the wear of the headphones themselves, the noise becomes more prominent and might start to be picked up in audio recordings.
But even said that it shouldnt be that big of a case as it only becomes an issue if the audio levels are rather high or if the users decide to lift one of the cups from their ear in which case the microphone will be more than likely to pick up the audio like in any other set of headphones, including the ath50x, but this only becomes a thing to worry about a few years in, so dont worry.
Overall, in this ATH-M50X review, we go over why this Audio Technica M50X set of headphones has proven to be an amazing choice, especially keeping the m50x price range and m50x specs in mind.
Its a wonderful entry point in the otherwise expensive and niche high-fidelity audio scene which offers the best of the best, and Audio Technica keeps to be a big part of the industry, providing with amazing equipment that pushes the scene forward.
If you have enjoyed this Audio-Technica ATH-M50X review, please leave a like, subscribe to the channel and if you have any thoughts about the audio technica ath-m50, feel free to leave them in the comment section below.
#consordini #audiotechnica #headphones
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Audio-Technica ATH-M50X Review [With Full Specifications]](https://i.ytimg.com/vi/nJsC1XbH3J4/mqdefault.jpg)
![Slate Digital Virtual Mix Rack Dynamics Review [Extended Version]
Hey there, and thanks so much for checking out our Slate Digital Virtual Mix Rack Dynamics Review!
If you’re interested in purchasing Slate Digital Virtual Mix Rack Dynamics, you can do so here with a great price: https://imp.i114863.net/5ryMn
Slate Digital is known for their plugins. You can check its price
Which is just insane. It’s such a great value for the money. Today, we will be looking at the digital mix rack and some of the compressors that are included in it.
Create your own custom VMR (Virtual Mix Rack) to do exactly what you need it to do. Slate Digital is a powerhouse in the audio industry and their Everything Bundle has everything you need to produce like a pro.
Check out our Slate Digital Virtual Mix Rack Dynamics Review video tutorial and find out for yourself if the Slate everything bundle is worth it!
What are your opinions on Slate Digital? How much of their Everything Bundle do you actually use? What are your favorite plugins?
Please feel free to post in the comments below. We’d love to hear your thoughts!
If you would like to sign-up for the Slate Digital Everything Bundle subscription you can do so at:
https://www.slatedigital.com/
We also have tons of other great tutorials and gear reviews on our channel. Visit our channel page and subscribe to check them out!
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
The Slate Digital Virtual Mix Rack lets you build your own channel strip, reminiscent of the 500 series of racks.
You can chain each module together in any order or combination, just like in real life as if you had the physical units on your station.
The music technology of the Everything Bundle is powerful. I love mixing with Slate. These are all recreations (or emulations) of the most famous compressor of all time, the UA1176. The work flow and layout of the system is really intuitive and useful.
- The FG116 is in the middle of the road.
- FG116 Modern is a hot rodded version with more modern transformers and signals in the compression path.
- The FG116 Vintage is the most true recreation of the UA1176. Gritty, mid-forward, and super punchy. An explosive vibe. You can do really aggressive compression and then pull it back to blend in with the original signal to keep it nice and even sounding.
- The FG401 is VCA. A very transparents bus compressor. It is a recreation of the original SSL circuit, but with added ratio options which makes is very versatile. Nothing gives drums punch and glue like this guy. Includes transformer switching for extra saturation.
- The FG Bomber is an original design from Slate Digital. Easy to use. Present, fat, and tight modes. Mellow.
- The FG Stress is a super versatile compressor that you can set up to sound like practically any compressor inexistence. High pass side chaining. Response curves and distortion options as well. Snappy.
- The Monster is all about aggrssion (naturally). It emmulates the “all buttons in” hack of the orginal 1176.
- The U73B is a faithful emmulaton of a vintage German brodcast compressor. Slow, gentle, vibey effect.
Slate is known for their analog modeling. Overall, there is so much to play with in the bundle. There are lots of options, but it’s not overwhelming to pick a compressor and start working.
With no physical tubes to worry about maintaining, it’s so easy to use. This bundle has a great vintage vibe to it.
I hope this video gave you some insight to what is included in the Slate Virtual Mix Rack and helps you decide if you want to purchase a subscription for your home recording studio.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado.
I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini.
Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music.
Thanks for watching!
#consordini #slatedigital
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Slate Digital Virtual Mix Rack Dynamics Review [Extended Version]](https://i.ytimg.com/vi/nbRxbZOxrdo/mqdefault.jpg)





![Korg Volca Beats Review [Full Version]
Hey there, and thanks so much for checking out our Korg Volca Beats Review. The Korg Volca Beats is a super portable, super easy to use, great sounding beat machine.
If you’re interested in purchasing Korg Volca Beats, you can do so here with a great price: https://imp.i114863.net/qMxBY
In this review, we go over some of the major features of the Korg Volca Beats and demonstrate the basics of how it works, and how you can make great sounding beats right away to help you produce like a pro.
If you are an audio engineer that is always on the go, the Korg Volca Beats makes it easy to create whatever, wherever and whenever inspiration strikes.
On a plane, on a train, on your feet or in an automobile. Just, please, do not use it while driving. Check out our Korg Volca Beats tutorial review demo video.
Do you have any tips on getting the most out of the Korg Volca Beats? Do you have a favorite portable beat machine? What do you use for electronic music production? Let us know in the comments down below!
If you’re interested in purchasing the Korg Volca Beats you can do so here: http://bit.ly/2VT1nDo
We also have tons of great mixing, mastering and production tutorials on the channel. Visit our channel page and subscribe to check them out!
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
The Korg Volca Beats is easy to acquaint yourself with. Everything is very straight forward.
Across the bottom are 16 resistive input touch controls featuring: kick, snare, high tom, low tom, open hat, closed hat, clap, clave, agogo, and crash.
What is great about the Korg Volca Beats is that the first 6 sounds (kick, snare, toms, and hats) are all true analog circuits, which gives a more authentic non-linear sound.
The last four sounds (clap, clave, agogo, and crash) are PCM digital samples. The last 6 touch controls help with pattern management and controls.
The Korg Volca Beats is also incredibly easy to program. Just select an instrument and go into step mode. This gives us a 16 step sequencer. Just rinse and repeat for each sound to create custom beats in no time.
Use the tempo control knob to dial in the exact BPM you need. Use the part level knob to control volume for each instrument.
Dedicated decay, pitch, click, snap, and grain knobs for the kick, snare, toms, and hats mean it’s easy to adjust on the fly and you do not have to sift through menus to change what you need (thanks analog circuits!).
They offer a full spectrum of sounds for each element. Use the PCM speed knob to control the digital sounds in a similar fashion.
The stutter knobs apply a delay type effect and gives you even more customizable options. Adjust each sound individually or blanket it across the whole thing.
The Korg Volca Beats runs on 6 AA batteries or an optional 9 volt adapter. MIDI in, headphone, and CV gate in/out jacks across the top add to the versatility of the unit.
The Korg Volca Beats is just so freaking cool. Because it can go anywhere, it is really is a phenomenal solution for people on the go.
The simple controls make it easy for anyone to pick it up and start making great sounding beats right away no matter where you happen to be.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado.
I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry. I’m also an educator here on Consordini.
Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music.
Thanks for watching!
#consordini #korg #korgvolca
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Korg Volca Beats Review [Full Version]](https://i.ytimg.com/vi/oaHLMe3pHvM/mqdefault.jpg)

![Mixing Rock Guitars [Full Guide in less than 10 Minutes]
Hey there, and thanks so much for checking out our quick beginner tutorial video on how to start mixing great sounding rock guitar tracks!
Whether you’re mixing classic rock, hard rock, alt rock or any other style of rock music, this easy lesson is guaranteed to provide tips and tricks for getting your guitars to a great starting point. This video is perfect for producers and mixing engineers of any level, from beginner to pro.
We will be working in Presonus Studio One 4, and using plugins from Softube, including the revolutionary Softube Console 1 mixing plugin control surface. Even if you’re not using Studio One or Softube Console 1, you can follow along with these simple steps in any DAW and using any plugins of your choice.
If you’re not familiar with the Console 1, you can check out our review of this game-changing piece of gear here: https://youtu.be/HyxRmUegj0A
And if you’d like to know more about this amazing DAW, we will soon have a full review of Studio One 4 as well as a beginner tutorial here on the channel, so be sure to subscribe.
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
Guitars can be deceptively tricky instruments to sit just right in a mix. And since they’re so critically important to getting your rock track sounding polished and radio ready, you want to take your time and make sure that the mix sounds as tight as possible.
Great sounding guitars can make or break any rock track, and getting them just right takes time, patience and practice. But in this tutorial, we break the process down into simple, easy steps to get your rock guitars sounding great.
As with any other topic in music mixing and production, everything comes down to personal taste. When considering using effects like chorus, modulation, reverb, phasing, flanging or anything else, it’s all up to your own creativity and preferences for tone.
But there are some critical fundamental steps to getting your guitars to sound clean and professional before you start adding on these types of mixing effects. In this video, we will show you how to use gating, EQ, compression and filtering to prep your guitar tracks to sit perfectly in you mix no matter what creative effects you plan to use.
Many less experienced mixing engineers will jump straight into using too many dramatic effects right off the bat without considering some simple steps that need to be taken in order to ensure the mix comes out balanced, clear and sounding pro. In our fast and simple video tutorial, we show you how to achieve a great starting sound for your guitars every time, no matter what style of rock you’re working on.
If you’re not working with Studio One or Softube Console 1, that’s OK - these steps can be followed in any major DAW, including Pro Tools, Logic Pro X, Cubase, Nuendo, Reaper, Garage Band, Audacity, FL Studio, or Ableton. You can use plugins from any manufacturer, including Waves, Slate Digital, McDSP, or anything else.
The important thing is understanding the fundamentals of how to use EQ, compression, gating, and other basic audio tools to get your guitars sounding great.
Whether you’re a beginner, intermediate or expert engineer or producer, this mixing lesson is guaranteed to get your rock mixes sounding more polished, consistent and professional, every time.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado. I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini. Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music. Thanks for watching!
#consordini #guitar #rockguitar #mixing
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Mixing Rock Guitars [Full Guide in less than 10 Minutes]](https://i.ytimg.com/vi/pulh0TwIt1g/mqdefault.jpg)