Uploaded October 2019 | Updated November 2026, 3 hours ago
In this AEA N22 review will take a look at what makes this microphone so special.
The N22 is a modern offering from AEA, it's an active ribbon microphone that requires phantom power which is a rather unique aspect of this microphone, as it has an active circuit that compensates for the top end loss found in ribbon microphones.
The AEA Nuvo N22 ribbon microphone is a modern near-field active ribbon microphone with a lightweight design. It's made in the USA, boasts a balanced frequency response at 1 to 18 inches from the source, with the already mentioned extended top end - but it still keeps the classic ribbon warmth.
This AEA microphone was made with the reform of expectations in mind, creating a modern take on the classic ribbon microphone and it's definitely rather impressive.
It boasts the ability to bring a rich frequency response that can stand alone in the mix without the need for additional layering of frequencies and deliver a clear sound, even when position right next to the audio source.
This AEA mic exhibits a high-frequency bump at 3kHz making it a wonderful option for recording anything from Vocals, to Electric guitars, Bass cabs, Acoustic guitars, Percussion and much more. If out of curiosity for AEA ribbon mics you end up on the official website, you can check out a wonderful section full of audio examples, including female vocals, electric bass finger action, Hi-Hats, acoustic guitars and more.
Or - if you stick around and watch our review on this microphone you'll see an example of the microphone being set around 8 to 10 inches away from the hammers from an upright piano and 3 inches away from a fender hooked up to a Fender Rhodes, which is known for being really boomy connected to an amp and you'll be able to see how wonderfully it performs.
The microphone comes at the price of $1000, but don't be deterred by the price.
This microphone sounds excellent when it comes to the proximity effect it boasts to have perfected when it comes to calm the boomy sounds you might found in a studio session and it controls the low end wonderfully, but it's not all flowers and sunshine, it might take some time finding just the right spot for the microphone to shine through as one our tests brought some results that were more mid-range than anything, but AEA does state, that it should be set inches away from the source, so just keep that in mind - for vocal examples, we recommend checking out their website.
The microphone produces a very nice old school 50s-60s sound similar to old school ribbon microphones that bring the piano to a very nice dark tonality, which might be a great way of creating a vintage feel.
These characteristics make this microphone a very wonderful speciality/character microphone that with some proper treatment is able to achieve wonderful results for a very nice, clean sounds.
The microphone has already been used by artists such as Jeff Tweedy, Justin Meldal-Johnsen, Adam Granduciel and many many more. So it's no wonder how this AEA offering is getting its name for the go-to choice when it comes to instrument and vocal recordings.
If you have enjoyed the video, be sure to leave a like and subscribe to our channel for more videos on wonderful studio equipment. If you have any thoughts or questions, feel free to leave them in the comment section below and stay tuned for more content that we bring your way every single weak.
If you’re interested in purchasing AEA N22, you can do so here with a great price: imp.i114863.net/JnOLQ
#consordini #aea #ribbonmic
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
In this AEA N22 review will take a look at what makes this microphone so special.
The N22 is a modern offering from AEA, it's an active ribbon microphone that requires phantom power which is a rather unique aspect of this microphone, as it has an active circuit that compensates for the top end loss found in ribbon microphones.
The AEA Nuvo N22 ribbon microphone is a modern near-field active ribbon microphone with a lightweight design. It's made in the USA, boasts a balanced frequency response at 1 to 18 inches from the source, with the already mentioned extended top end - but it still keeps the classic ribbon warmth.
This AEA microphone was made with the reform of expectations in mind, creating a modern take on the classic ribbon microphone and it's definitely rather impressive.
It boasts the ability to bring a rich frequency response that can stand alone in the mix without the need for additional layering of frequencies and deliver a clear sound, even when position right next to the audio source.
This AEA mic exhibits a high-frequency bump at 3kHz making it a wonderful option for recording anything from Vocals, to Electric guitars, Bass cabs, Acoustic guitars, Percussion and much more. If out of curiosity for AEA ribbon mics you end up on the official website, you can check out a wonderful section full of audio examples, including female vocals, electric bass finger action, Hi-Hats, acoustic guitars and more.
Or - if you stick around and watch our review on this microphone you'll see an example of the microphone being set around 8 to 10 inches away from the hammers from an upright piano and 3 inches away from a fender hooked up to a Fender Rhodes, which is known for being really boomy connected to an amp and you'll be able to see how wonderfully it performs.
The microphone comes at the price of $1000, but don't be deterred by the price.
This microphone sounds excellent when it comes to the proximity effect it boasts to have perfected when it comes to calm the boomy sounds you might found in a studio session and it controls the low end wonderfully, but it's not all flowers and sunshine, it might take some time finding just the right spot for the microphone to shine through as one our tests brought some results that were more mid-range than anything, but AEA does state, that it should be set inches away from the source, so just keep that in mind - for vocal examples, we recommend checking out their website.
The microphone produces a very nice old school 50s-60s sound similar to old school ribbon microphones that bring the piano to a very nice dark tonality, which might be a great way of creating a vintage feel.
These characteristics make this microphone a very wonderful speciality/character microphone that with some proper treatment is able to achieve wonderful results for a very nice, clean sounds.
The microphone has already been used by artists such as Jeff Tweedy, Justin Meldal-Johnsen, Adam Granduciel and many many more. So it's no wonder how this AEA offering is getting its name for the go-to choice when it comes to instrument and vocal recordings.
If you have enjoyed the video, be sure to leave a like and subscribe to our channel for more videos on wonderful studio equipment. If you have any thoughts or questions, feel free to leave them in the comment section below and stay tuned for more content that we bring your way every single weak.
If you’re interested in purchasing AEA N22, you can do so here with a great price: imp.i114863.net/JnOLQ
#consordini #aea #ribbonmic
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
![Mixing Rock Guitars [Full Guide in less than 10 Minutes]
Hey there, and thanks so much for checking out our quick beginner tutorial video on how to start mixing great sounding rock guitar tracks!
Whether you’re mixing classic rock, hard rock, alt rock or any other style of rock music, this easy lesson is guaranteed to provide tips and tricks for getting your guitars to a great starting point. This video is perfect for producers and mixing engineers of any level, from beginner to pro.
We will be working in Presonus Studio One 4, and using plugins from Softube, including the revolutionary Softube Console 1 mixing plugin control surface. Even if you’re not using Studio One or Softube Console 1, you can follow along with these simple steps in any DAW and using any plugins of your choice.
If you’re not familiar with the Console 1, you can check out our review of this game-changing piece of gear here: https://youtu.be/HyxRmUegj0A
And if you’d like to know more about this amazing DAW, we will soon have a full review of Studio One 4 as well as a beginner tutorial here on the channel, so be sure to subscribe.
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
Guitars can be deceptively tricky instruments to sit just right in a mix. And since they’re so critically important to getting your rock track sounding polished and radio ready, you want to take your time and make sure that the mix sounds as tight as possible.
Great sounding guitars can make or break any rock track, and getting them just right takes time, patience and practice. But in this tutorial, we break the process down into simple, easy steps to get your rock guitars sounding great.
As with any other topic in music mixing and production, everything comes down to personal taste. When considering using effects like chorus, modulation, reverb, phasing, flanging or anything else, it’s all up to your own creativity and preferences for tone.
But there are some critical fundamental steps to getting your guitars to sound clean and professional before you start adding on these types of mixing effects. In this video, we will show you how to use gating, EQ, compression and filtering to prep your guitar tracks to sit perfectly in you mix no matter what creative effects you plan to use.
Many less experienced mixing engineers will jump straight into using too many dramatic effects right off the bat without considering some simple steps that need to be taken in order to ensure the mix comes out balanced, clear and sounding pro. In our fast and simple video tutorial, we show you how to achieve a great starting sound for your guitars every time, no matter what style of rock you’re working on.
If you’re not working with Studio One or Softube Console 1, that’s OK - these steps can be followed in any major DAW, including Pro Tools, Logic Pro X, Cubase, Nuendo, Reaper, Garage Band, Audacity, FL Studio, or Ableton. You can use plugins from any manufacturer, including Waves, Slate Digital, McDSP, or anything else.
The important thing is understanding the fundamentals of how to use EQ, compression, gating, and other basic audio tools to get your guitars sounding great.
Whether you’re a beginner, intermediate or expert engineer or producer, this mixing lesson is guaranteed to get your rock mixes sounding more polished, consistent and professional, every time.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado. I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini. Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music. Thanks for watching!
#consordini #guitar #rockguitar #mixing
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Mixing Rock Guitars [Full Guide in less than 10 Minutes]](https://i.ytimg.com/vi/pulh0TwIt1g/mqdefault.jpg)

![Tritik Irid Review [Professional Opinion]
#consordini #tritik #audioplugin
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Tritik Irid Review [Professional Opinion]](https://i.ytimg.com/vi/qeZh22RShzo/mqdefault.jpg)


![TAL-DAC Review[Extended Version + Demo]
Thanks for watching our TAL DAC plugin review. Vintage keyboard workstations are highly collectible among musicians and engineers. This means they are rather expensive to pick up used.
This is where a quality emulation plugin can come in handy so you can get that same vintage feel without vintage prices. In this plugin review video, we talk about how vintage keyboard workstations store and recall their sounds.
We explore how TAL Software has emulated those chip sets to be used in the modern day. We also go over the features that come with the plugin to understand what TAL DAC is doing to the sound.
All of this combined makes the TAL DAC an excellent piece of software for those looking to add some lo-fi flair to their tracks.
TAL DAC was part of a bigger plugin ecosystem called TAL Sampler (which we have a seperate video review for). TAL then pulled DAC out of Sampler and turned it into its own stand alone plugin.
Sampler is an emulation of classic keyboard workstations that were popular in the 1980’s and 1990’s. These workstations had wave tables or sets of samples that were taken from other digital and analogue instruments and stored digitally.
To play back the sound, the work stations sent the digital information through a DAC, or a Digital to Analogue Conversion chip. Now, one of the most interesting things about these keyboards was that digital audio was not all that advanced yet.
Because of this, the workstations didn’t perform optimally 100% of the time, causing each of these DAC chip sets to have some very unique sound characteristics.
Back to TAL.
TAL DAC is a plugin that allows you to emulate the characteristics of different vintage digital to analogue conversion chips. It also serves as a general catch all distortion and bit crushing unit as well.
DAC gives an old school digital type of sound. The engineering and programing that TAL has put into this plugin is just fantastic.
The features of the TAL DAC include:
- Recording stage with input volume control and soft clipper (adds odd harmonics).
- Variable recording sample rate (1000Hz-44100Hz).
- Variable recording bit-depth (4bit-16bit) with different algorithms (mu-law, mu-law delta, - linear).
- Reconstruction section with different reconstruction methods (hold, variable, linear, S1000/sinc).
- Very steep reconstruction filters (optional).
- AMP drive (adds even and odd harmonics to the signal).
- A high- and low shelf filter (12dB).
- All non-linear components are 8x oversampled to avoid aliasing.
Special thanks to TAL Software for giving a digital license to their products so we can review them for you all to watch! Thanks TAL!
Learn more about TAL DAC and download your own copy here:
https://tal-software.com/products/tal-dac
Be sure to like, comment, and subscribe for new content, reviews, and tutorials.
We also have tons of great mixing, mastering and production tutorials on the channel. Click this link for even more studio gear reviews: https://www.youtube.com/playlist?list=PLmfYPVm7C1YX39gnzsuMIfKSZ77OVYydB
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
#consordini #tal #audioplugin TAL-DAC Review[Extended Version + Demo]](https://i.ytimg.com/vi/rUoBjoarwiU/mqdefault.jpg)

![Arturia Keylab Essential 49 Midi Controller Review [Extended Version]
Thanks for watching out Arturia Keylab Essential 49 review. A MIDI controller is an essential component of any home studio.
If you’re interested in purchasing a Arturia Keylab Essential 49, you can do so here with a great price: https://imp.i114863.net/ezEJO
The versatility, software bundle, and low price point of the Arturia Keylab Essential 49 MIDI controller makes it an excellent choice for anyone looking to expand what their home studio is capable of doing.
See why we think the Keylab Essential 49 is one of the best MIDI controllers available on the market today.
A good MIDI controller has many features that allow you to get the exact sound that you are looking for. The features of the Arturia Keylab Essential 49 include:
- Performance controls: Bend, modulate, and transpose your sounds by semitones or full octaves.
- Intelligent chord feature: Quickly create full arrangements
- Dedicated MIDI channel control
- Eight dual purpose, back lit pads for making beats and for mapping options
- MCU/HUI protocol for controlling your DAW
- Screen and analog lab remote
- Pre-mapped knobs and faders
- 49 note velocity sensitive keyboard
- MIDI out
- Sustain pedal input
- USB connectivity
- Optional DC power
- Compatible with Pro Tools, Logic Pro X, FL Studio, Bitwig, Cubase, Ableton Live, Digital Performer, and Studio One
All of these features make the Keylab Essential 49 incredibly versatile.
Where the Arturia keylab 49 Essential really shines is how Arturia designed it to integrate into the V Collection Series of instruments. An assortment of those sounds come preloaded with theArturia 49 when you purchase it.
The V Collection Series is a fantastic sounding pack to pair with the Arturia controller. They are all emulations of classic gear. What’s really amazing is that they have automatically mapped out the control parameters for each sound onto the sliders and knobs on the Arturia Keylab Essential 49 keyboard controller.
It is truly “plug and play” and that gets you to creating music sooner. You are also able to subscribe to the full library of over 6000 sounds over on Splice. The MIDI controller has basic control center software.
This lets you fine tune the Arturia Lab to exactly what you want.You can change the mapping of any and every button, key, knob, or slider easily. The sound library and integration is a key feature of the Essential 49.
The problem with many MIDI controllers that have this many features is that they are often quite expensive. This is not the case with Arturia controllers. The Arturia 49 Keylab starts at a very reasonable USD$199.
This is a great deal considering how much it can do. The price for the big brother of this model, the Arturia Keylab 61 Essential starts at just USD$259. The black edition of the Arturia Keylab 49 USD$249.
A high quality MIDI controller that doesn’t break the bank is hard to come by when you are a home producer. The Arturia Keylab Essential 49 is an excellent MIDI controller.
From its slew of features, access and intergration with Arturia’s massive sound library, and great price point, the Arturia Keylab Essential 49 is one of the best MIDI controllers available on the market today.
Learn more about the Arturia Keylab Essential 49 here:
https://www.arturia.com/products/hybrid-synths/keylab-essential-49/overview
Purchase your own Arturia Keylab Essential 49 here:
https://www.sweetwater.com/store/detail/KeyLabEss49 arturia-keylab-essential-49-keyboard-controller
Be sure to like, comment, and subscribe for new content, reviews, and tutorials.
We also have tons of great mixing, mastering and production tutorials on the channel. Click this link for even more studio gear reviews: https://www.youtube.com/playlist?list=PLmfYPVm7C1YX39gnzsuMIfKSZ77OVYydB
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
#consordini #arturia #midicontroller Arturia Keylab Essential 49 Midi Controller Review [Extended Version]](https://i.ytimg.com/vi/smkNmGwHmrA/mqdefault.jpg)


![Alesis Micro Limiter Review [Full Version]
If you are searching for a processor for your home studio that is easy to use and delivers the reliability that you can depend on the Alesis Micro Limiter may just be the solution. This Alesis Micro Limiter review will provide you with the information that you need to make an informed decision.
Alesis has the reputation for developing equipment that is well-built, durable and affordable. Alesis check’s off the list nicely of what engineers and recording professionals want in the studio. This is a “vintage” FET compressor. It is a 1/3 U limiter (in stereo) which is a favorite for bass guitar, drums, vocals and back up vocals.
It is technically a limiter but at low compression levels, the ratios are more of a compressor than a limiter. Ratios range between 2:1-8:1 with the green LED on, 10:1 when the yellow LEDS are lit and 16:1 when the red LEDs are lit.
With this limiter there is always some compression happening. The higher input allows more compression at higher ratios. It is an interesting piece of equipment that we decided was worth a second look.
This video will help you decide what it is that the Alesis can do for you and whether you need to clear some space for it in your studio.
What You Get.
The Alesis Micro Limiter is a very simple, yet very dynamic piece of equipment. The three controls on the front of the unit are for release, output and compression. It is powered by a 9V AC adaptor which is included.
You do not have a threshold control with this limiter but frankly you will not notice that it is gone, we did not. When you first unpack it, you will not be impressed. It is small, it is compact and gives you the feeling based on its size and lack of controls that you should not expect that much. Do not be fooled by the look, because it does deliver.
This is the ideal limiter for new users and for people on a budget. The price point is great and the sound is hard to beat at this price. It can easily reduce the peaks without distorting the sound. It is a stereo device which means, the ambiance, back up vocals, parallel buses can easily be compressed. It can be as subtle as you like or as profound as you like.
The Capabilities.
The release time according to our testing is about 70 mil sec to around 100 mil sec, which makes it a great option for both vocals and instruments. We tested it with some hip hop kicks and found that it tightens up the high frequency nicely. It can easily emphasize attack and add some character to it.
We also did a little comparison to some well-known plugin limiters and were impressed with the moderation that we could get out of the Alesis and could not get with the plugins. We found that the lows were tighter.
The release times really made a difference in the controllability and the compression response times. It is a fast and that makes a difference in what you can and cannot compress using the Alesis micro limiter. It can easily maintain articulation at higher gains which is nice.
Overall.
This is not a fancy piece of equipment which really adds to its usability. Simple can be best when you are in the studio and you really do not have time to fiddle around with yet another bunch of dials. The unit is well-made and durable and delivers exactly as promised.
There is a great deal that this machine can bring to your studio and really can work hard to cut out some of the other equipment you need by replacing it with this little limiter.
Overall we recommend the Alesis Micro Limiter. If you have other Alesis equipment in the studio it is a nice complement to that equipment, if you do not you will still love what you can do with this equipment.
It is a great deal, that is offered at a great price point and it packs quite an unexpected punch. Watch the video and learn what you need to about the Alesis Micro Limiter. Leave your questions and comments in the section below!
#consordini #alesis
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Alesis Micro Limiter Review [Full Version]](https://i.ytimg.com/vi/sybO5S65cnA/mqdefault.jpg)