Fab-Form Industries | Mixing Helix Micro Rebar @FabFormIndustries | Uploaded 9 years ago | Updated 2 hours ago
http://helixwest.com/mixing.php
Helix clumping will NEVER occur if the following procedure is rigorously followed:
Add a minimum of 6% of the mix water (more water is better) into the drum, with the drum turning at charging speed;
Dump all of the Helix® into the drum in one go, no need to slowly shake;
Rotate the drum at charging speed for six minutes (as the clumps fall over the mixing fins they are broken up into 2D layers, with the water acting as a lubricant).
Add the sand, aggregate and cement in the normal manner;
Mix an additional 6 minutes in the truck drum to ensure the Helix is completely disbursed.
http://helixwest.com/mixing.php
Helix clumping will NEVER occur if the following procedure is rigorously followed:
Add a minimum of 6% of the mix water (more water is better) into the drum, with the drum turning at charging speed;
Dump all of the Helix® into the drum in one go, no need to slowly shake;
Rotate the drum at charging speed for six minutes (as the clumps fall over the mixing fins they are broken up into 2D layers, with the water acting as a lubricant).
Add the sand, aggregate and cement in the normal manner;
Mix an additional 6 minutes in the truck drum to ensure the Helix is completely disbursed.