Uploaded June 2025 | Updated November 2026, 3 hours ago
Turning a Raspberry Pi 5 into a Mini-ITX board that can be mounted in any Mini-ITX or larger PC case.
The “Waveshare Micro HDMI To HDMI Multifunctional Adapter” used in this project is available on Amazon US here: amzn.to/45RAPrT And on Amazon UK here: amzn.to/43X0RbP Please note that these are affiliate links, and that I earn a commission from all qualifying purchases.
STL 3D print files have been shared on Thingiverse here: thingiverse.com/thing:7061921
Required mounting hardware comprises 2 x M2.5 12mm standoffs, 4 x M2.5 10mm standoffs, 4 x M2.5 15+6mm standoffs, plus 12 x M2.5 6mm screws. Also used are two male jumper leads that are wire-wrapped to the Pi 5 to allow it to be turned on using the power switch in a PC case.
My previous “Raspberry Pi 500 Maker Build” video is here: youtube.com/watch?v=2WphP4qpaM8
And you can find more of my Raspberry Pi project videos on this page: explainingcomputers.com/raspberry_pi_projects.html
More videos on computing and related topics can be found at:
youtube.com/@ExplainingComputers
And more videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
01:06 Hardware
06:49 3D Model
08:20 M.2 HAT & Standoffs
11:19 Power Switch
12:10 Final Assembly
16:51 Desktop Pi
#RaspberryPi #Mini-ITX #ITX #ExplainingComputers
Turning a Raspberry Pi 5 into a Mini-ITX board that can be mounted in any Mini-ITX or larger PC case.
The “Waveshare Micro HDMI To HDMI Multifunctional Adapter” used in this project is available on Amazon US here: amzn.to/45RAPrT And on Amazon UK here: amzn.to/43X0RbP Please note that these are affiliate links, and that I earn a commission from all qualifying purchases.
STL 3D print files have been shared on Thingiverse here: thingiverse.com/thing:7061921
Required mounting hardware comprises 2 x M2.5 12mm standoffs, 4 x M2.5 10mm standoffs, 4 x M2.5 15+6mm standoffs, plus 12 x M2.5 6mm screws. Also used are two male jumper leads that are wire-wrapped to the Pi 5 to allow it to be turned on using the power switch in a PC case.
My previous “Raspberry Pi 500 Maker Build” video is here: youtube.com/watch?v=2WphP4qpaM8
And you can find more of my Raspberry Pi project videos on this page: explainingcomputers.com/raspberry_pi_projects.html
More videos on computing and related topics can be found at:
youtube.com/@ExplainingComputers
And more videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
01:06 Hardware
06:49 3D Model
08:20 M.2 HAT & Standoffs
11:19 Power Switch
12:10 Final Assembly
16:51 Desktop Pi
#RaspberryPi #Mini-ITX #ITX #ExplainingComputers









![Raspberry Pi 500+
The Raspberry Pi 500+ takes a Raspberry Pi 500 and adds an M.2 NVMe SSD and an illuminated, mechanical keyboard. This video provides a review and demo, including full specifications, initial setup, and performance tests.
You can learn more about the Pi 500+ in its press release here: https://www.raspberrypi.com/news/the-ultimate-all-in-one-pc-raspberry-pi-500-plus-on-sale-now-at-200/
Please note that the Raspberry Pi 500+ shown in this video was supplied before launch by Raspberry Pi, but that they had no input to, or control over, this review. However, as I accepted something of value from a third party to help make this video, it is flagged as a “paid promotion”.
My previous review of the Pi 500 is here: https://www.youtube.com/watch?v=FOewqaDiynI
And of the Pi 400 here: https://www.youtube.com/watch?v=P1E5xszQqV8
All of my Raspberry Pi videos can be found on this page:
https://explainingcomputers.com/raspberry_pi_videos.html
INCREASING SSD SPEED (NB: at your own risk)
To change the PCIe speed from 2.0 to 3.0, open a terminal and enter:
sudo nano /boot/firmware/config.txt
In the resultant editor, scroll to the bottom, and under [all] add the two lines:
dtparam=nvme
dtparam=pciex1_gen=3
As shown in the video, then save the file, reboot the Pi, and your SSD should operate faster!
Note that to perform the speed test shown in the video, you will need to install HD Parameters. You can do this in the terminal by entering:
sudo apt install hdparm
More videos on computing and related topics can be found at:
http://www.youtube.com/@ExplainingComputers
And more videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: http://www.youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
00:56 Specifications
06:35 Peeking Inside
07:54 First Boot
11:05 Keyboard Lighting
12:20 Performance
16:27 Wrap
#RaspberryPi500+ #RaspberryPi #Pi500+ #Pi500 #SSD #Keyboard #ExplainingComputers Raspberry Pi 500+](https://i.ytimg.com/vi/_LYU-I1LzcI/mqdefault.jpg)
