Uploaded August 2026 | Updated November 2026, 5 days ago
Using RISC-V hardware for all computing for a week, including editing this video.
The final Kdenlive video render took 32 minutes and 41 seconds.
My original review of the Milk-V Jupiter 2 is here: youtube.com/watch?v=vSKA6thLI1U
And of the Milk-V Jupiter 1 is here: youtu.be/LX9Pz1TmEww
My 2023 RISC-V Week is also here: youtu.be/Na6PT4npsMg
And you can find all of my RISC-V videos on this page: explainingcomputers.com/riscv_videos.html
More videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
01:22 Hardware
04:47 Video Editing
08:53 Graphics & Audio
13:58 Security & Stuff
17:50 YouTube
19:52 TV PC
22:41 Reflections
#RISC-V #Milk-V #Jupiter #RVA23 #Kdenlive #videoediting
Using RISC-V hardware for all computing for a week, including editing this video.
The final Kdenlive video render took 32 minutes and 41 seconds.
My original review of the Milk-V Jupiter 2 is here: youtube.com/watch?v=vSKA6thLI1U
And of the Milk-V Jupiter 1 is here: youtu.be/LX9Pz1TmEww
My 2023 RISC-V Week is also here: youtu.be/Na6PT4npsMg
And you can find all of my RISC-V videos on this page: explainingcomputers.com/riscv_videos.html
More videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
01:22 Hardware
04:47 Video Editing
08:53 Graphics & Audio
13:58 Security & Stuff
17:50 YouTube
19:52 TV PC
22:41 Reflections
#RISC-V #Milk-V #Jupiter #RVA23 #Kdenlive #videoediting







![Raspberry Pi 500+
The Raspberry Pi 500+ takes a Raspberry Pi 500 and adds an M.2 NVMe SSD and an illuminated, mechanical keyboard. This video provides a review and demo, including full specifications, initial setup, and performance tests.
You can learn more about the Pi 500+ in its press release here: https://www.raspberrypi.com/news/the-ultimate-all-in-one-pc-raspberry-pi-500-plus-on-sale-now-at-200/
Please note that the Raspberry Pi 500+ shown in this video was supplied before launch by Raspberry Pi, but that they had no input to, or control over, this review. However, as I accepted something of value from a third party to help make this video, it is flagged as a “paid promotion”.
My previous review of the Pi 500 is here: https://www.youtube.com/watch?v=FOewqaDiynI
And of the Pi 400 here: https://www.youtube.com/watch?v=P1E5xszQqV8
All of my Raspberry Pi videos can be found on this page:
https://explainingcomputers.com/raspberry_pi_videos.html
INCREASING SSD SPEED (NB: at your own risk)
To change the PCIe speed from 2.0 to 3.0, open a terminal and enter:
sudo nano /boot/firmware/config.txt
In the resultant editor, scroll to the bottom, and under [all] add the two lines:
dtparam=nvme
dtparam=pciex1_gen=3
As shown in the video, then save the file, reboot the Pi, and your SSD should operate faster!
Note that to perform the speed test shown in the video, you will need to install HD Parameters. You can do this in the terminal by entering:
sudo apt install hdparm
More videos on computing and related topics can be found at:
http://www.youtube.com/@ExplainingComputers
And more videos on film and other making, plus retro tech, can be found on my Christopher Barnatt channel: http://www.youtube.com/@ChristopherBarnatt
Chapters:
00:00 Titles & Intro
00:56 Specifications
06:35 Peeking Inside
07:54 First Boot
11:05 Keyboard Lighting
12:20 Performance
16:27 Wrap
#RaspberryPi500+ #RaspberryPi #Pi500+ #Pi500 #SSD #Keyboard #ExplainingComputers Raspberry Pi 500+](https://i.ytimg.com/vi/_LYU-I1LzcI/mqdefault.jpg)


