Mini Willys CJ2A Part 8: Steering "Rack" and Using a Shrinker/Stretcher for making panels @PaulsGarage

Uploaded July 2017 | Updated September 2026, 2 hours ago

Today, I finally tackle the steering problem. It's a problem in that I never even considered how I would tackle the steering. Now it's done, with the exception of the steering wheel, the part that does the steering. Not quite done, is it? I use some Cardboard Aided Design, some electric shears, and a shrinker/stretcher to make some other panels.

It's exciting. No it isn't. Why are you still reading this? Go to bed, man, it's late. At least it is for me.

If you want to see the jeep project from the beginning, click here: youtu.be/aadP9oCNyCI The early videos are particularly bad. I'm sorry.

We have a community Discord server. To join, send me an email at vloggarage@gmail.com, or click here: discord.gg/TQWeGJU
Follow me on twitter at twitter.com/VlogGarage
Instagram: Instagram.com/pauls.garage

Music: "Quirky Dog" by Kevin MacLeod. incompetech.com

Mini Willys CJ2A Part 8: Steering Rack and Using a Shrinker/Stretcher for making panels

Recreate Classic Car Parts in METAL with 3D Scanning | Revopoint Metro Y Pro

3D Printed Plastic to Aluminum Bronze Spear #shorts

Metal Casting TEMPERATURE matters more than you think

DIY Electric Heat Treat Oven/Kiln/Furnace Part 4: Wiring up the Orton Kiln Controller

Mini Willys CJ2A Part 3: Un-Building the Model for Sheet Metal Fabrication

$How to Make a Fire Brick Metal Foundry Furnace, Part 1: Cutting the Bricks Today Im building a better foundry. I use insulating fire bricks, some paper, a simple saw and a block of wood to shape it all. Next time Ill build an enclosure (as opposed to shelling out lots of money for a keg. Im not made of money) out of sheet steel and apply mortar and a coating, made from satanite. Then its time to start melting metal! This is intended for use with a burner, such as propane or oil. This will NOT work well with charcoal. Part 2 is found here: https://youtu.be/W5PoXfDWazA Want to learn sand casting using your 3D printer? I can teach you!: https://paulsmakeracademy.mykajabi.com/joinus This foundry furnace will be used for casting aluminum, brass, bronze, copper and other alloys. Probably not cast iron, though. I got the bricks here: https://www.armilcfs.com. They have kaowool too and some other stuff. This replaces my old furnace which I build in the video how to build a better mini metal foundry, published months ago. That furnace, based on grant Thomsons mini metal foundry, used castable refractory cement instead of plaster and sand. It is still holding up, but insulating fire brick insulates better. The old furnace build is here (dont watch it, this new one is better) https://youtu.be/VSsPHwWB_pI Mailing Address: 1818 Milton Ave STE 100 #1973 Janesville, WI 53545-9998 We have a community Discord server. To join, send me an email at vloggarage@gmail.com, or click here: https://discord.gg/TQWeGJU Follow me on twitter at https://twitter.com/VlogGarage Instagram: http://www.Instagram.com/pauls.garage Patreon: http://www.patreon.com/paulsgarage Music: Quirky Dog by Kevin MacLeod. http://incompetech.com/ #metalcasting #foundry #forge$

Building an Asian Pottery Kick Wheel (kerokuro or karatsu wheel) Part 2/2: The Rest of It

The Bronze Alloy as Tough as Steel! (almost)

Sand Rammer for Greg: Different Gating, Better Finish, And Failures...

This Thing is MADE for Investment Casting | Nova3d Gem3 Resin Printer

$How to Make a Fire Brick Foundry Furnace, Part 2: Applying Satanite as a Mortar/Refractory Coating$