Uploaded November 2026 | Updated November 2026, 2 days ago
A micrometer stand is a device which holds a micrometer in a fixed position. It allows the operator to manipulate the part being measured without worrying about dropping the micrometer. It's also helpful for those of us with stiff and shaky fingers : (
In this episode, I rework the Zamak casting for the base to remove and fill some casting defects.
I also laser cut the rubber clamp jaw protectors from EPDM rubber.
The sandblasting process prepares the castings for powder coating.
The powdercoat I am using comes from Prismatic Powders and is called Black/White Vein which is a fairly good match to regular hammertone paint only much more durable.
If anyone wants to build your own version of the Micrometer Stand, you can download the STL files for the patterns and also the 2D drawings here: drive.google.com/drive/folders/1hiiB5iRdJdy8CPK4l8FPu73-jiRo6ZWZ?usp=drive_link
The split patterns for the jaws will need to be mirrored in your slicer software to give you both halves of the complete pattern. It's worth increasing the volume of the print by around 2 to 4% to account for shrinkage of the filament and the casting.
You can find the full playlist for the build here: youtube.com/playlist?list=PLLi5KLJ8fAX0
A micrometer stand is a device which holds a micrometer in a fixed position. It allows the operator to manipulate the part being measured without worrying about dropping the micrometer. It's also helpful for those of us with stiff and shaky fingers : (
In this episode, I rework the Zamak casting for the base to remove and fill some casting defects.
I also laser cut the rubber clamp jaw protectors from EPDM rubber.
The sandblasting process prepares the castings for powder coating.
The powdercoat I am using comes from Prismatic Powders and is called Black/White Vein which is a fairly good match to regular hammertone paint only much more durable.
If anyone wants to build your own version of the Micrometer Stand, you can download the STL files for the patterns and also the 2D drawings here: drive.google.com/drive/folders/1hiiB5iRdJdy8CPK4l8FPu73-jiRo6ZWZ?usp=drive_link
The split patterns for the jaws will need to be mirrored in your slicer software to give you both halves of the complete pattern. It's worth increasing the volume of the print by around 2 to 4% to account for shrinkage of the filament and the casting.
You can find the full playlist for the build here: youtube.com/playlist?list=PLLi5KLJ8fAX0

