Uploaded November 2026 | Updated November 2026, 2 hours ago
Microchip demonstrates robotic control built from wireless and wired building blocks, with wireless commands linking motion tracking to actuators while reducing cabling around moving parts. Wireless marketing engineer Joanne Povert explains how the setup combines MCU-based motor control, connectivity, security and local processing for responsive robot movement. microchip.com
The demonstration uses a camera and processing unit to interpret hand motion, then sends commands over a wireless link to a node connected to motor control. Microchip PIC32 devices handle wireless communication and motor control, while Bluetooth connectivity is provided through a module with an antenna. The goal is to keep the actuator system responsive while limiting the cables that can add weight and restrict movement.
For wired connections, the setup includes 10BASE-T1S Ethernet transceivers. The interview identifies the LAN8670 and LAN8651, with the latter described as an external MAC-PHY controller supporting T1S alongside a PIC32CX-SG41 MCU. The discussion also points to CAN connectivity and to combining wired and wireless links within a robot architecture.
The broader engineering picture includes motor control, functional safety, OTA updates, security, tactile sensing and local AI/ML processing on small microcontrollers. For workloads involving video or heavier computation, Povert distinguishes those MCU tasks from more demanding processing on FPGA or multicore MPU platforms; she also mentions Microchip’s Smart NPU devices as a higher-power AI acceleration option.
Microchip’s robotics building blocks span wireless nodes, Ethernet T1S, Wi-Fi, TSN switching, EtherCAT, FPGA-based processing and MCU motor control. The demo illustrates how a system can distribute sensing, communication and control across these components, choosing local microcontroller processing for simpler tasks and larger compute platforms when the application requires it. The interview was filmed at electronica 2026.
Microchip demonstrates robotic control built from wireless and wired building blocks, with wireless commands linking motion tracking to actuators while reducing cabling around moving parts. Wireless marketing engineer Joanne Povert explains how the setup combines MCU-based motor control, connectivity, security and local processing for responsive robot movement. microchip.com
The demonstration uses a camera and processing unit to interpret hand motion, then sends commands over a wireless link to a node connected to motor control. Microchip PIC32 devices handle wireless communication and motor control, while Bluetooth connectivity is provided through a module with an antenna. The goal is to keep the actuator system responsive while limiting the cables that can add weight and restrict movement.
For wired connections, the setup includes 10BASE-T1S Ethernet transceivers. The interview identifies the LAN8670 and LAN8651, with the latter described as an external MAC-PHY controller supporting T1S alongside a PIC32CX-SG41 MCU. The discussion also points to CAN connectivity and to combining wired and wireless links within a robot architecture.
The broader engineering picture includes motor control, functional safety, OTA updates, security, tactile sensing and local AI/ML processing on small microcontrollers. For workloads involving video or heavier computation, Povert distinguishes those MCU tasks from more demanding processing on FPGA or multicore MPU platforms; she also mentions Microchip’s Smart NPU devices as a higher-power AI acceleration option.
Microchip’s robotics building blocks span wireless nodes, Ethernet T1S, Wi-Fi, TSN switching, EtherCAT, FPGA-based processing and MCU motor control. The demo illustrates how a system can distribute sensing, communication and control across these components, choosing local microcontroller processing for simpler tasks and larger compute platforms when the application requires it. The interview was filmed at electronica 2026.










