Meshtastic Firmware with Display and User Button on XIAO nRF52840 and Wio-SX1262 LoRa #meshtastic @LeonAnavi
Meshtastic Firmware with Display and User Button on XIAO nRF52840 and Wio-SX1262 LoRa #meshtastic @LeonAnavi
Uploaded January 2026 | Updated September 2026, 2 weeks ago
The OLED display on the XIAO Meshtastic kit stays on for the configured interval after receiving messages or when the user button is pressed. Since the button isn’t soldered, I’ve been manually shorting it with metal tweezers.
Meshtastic Firmware with Display and User Button on XIAO nRF52840 and Wio-SX1262 LoRa #meshtasticThe Yocto Project on Raspberry Pi 5 Episode 9: Enable I2C and Use SSD1306 Mini OLED Display on LinuxLenovo ThinkPad Thunderbolt 3 Dock 40AC DBB9003L1 with ThinkPad T14 and Ubuntu 24.04 TLS LinuxThe Yocto Project on Raspberry Pi 5 Episode 5: Modifying U-Boot Environment in Linux with fw_setenvXIAO ESP32-C5 GPIO pins on IoT Board with Dual-Band WiFi, BLE, Zigbee, Thread, RISC-V MCU #esp32c5Intel AX201 Wi-Fi 6.0 and Bluetooth 5.1 on Lenovo ThinkPad T14 Gen 1 Laptop #shorts #thinkpadHow to connect the Raspberry Pi Touch Display 2 to the Raspberry Pi 5? #raspberrypi #shorts #linuxESP32-H2 SuperMini Development Board with 32-bit RISC-V MCU, Wi-Fi, BLE, Thr ead and Zigbee #esp32Level Up Your 3D Printing: Install Brass Thread Inserts Like a Boss with Mintion Nutopress ProUnboxing Raspberry Pi Compute Module 5 IO Case SC1753 #raspberrypi #linuxUnboxing XIAO RA4M1 with Renesas Arm MCU, 19 GPIOs, RGB LED, CAN BUS and USB 2.0 #shorts #arduinoideUnboxing Meshtastic Dev Kit with XIAO nRF52840 and Wio-SX1262 LoRa #shorts #meshtastic
Leon Anavi |

Meshtastic Firmware with Display and User Button on XIAO nRF52840 and Wio-SX1262 LoRa #meshtastic

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER