Uploaded November 2023 | Updated September 2026, 2 weeks ago
Meet the P1P HotBox: Crafted to complement your Bambu Lab P1P experience seamlessly. It is your solution for stable interior temperature, fume and odor control, reduced printer noise (20%+), and convenient access to your Bambu Lab P1P and tools. Upgrade your P1P with a P1P HotBox: whambamsystems.com/products/p1p-hotbox-3d-printer-enclosure
0:00 Introduction
0:17 Quick Installation
0:38 Why Do You Need a HotBox?
0:40 Printing High-Tech Filaments
1:40 Containing Fumes and Odors
2:21 Noise Reduction
2:45 More Features
4:45 Vent and Fume Exhaust
5:25 More Printable Upgrades
If you want to print ABS, Nylon, PC, and other high-temperature filaments, an enclosure is one of the best upgrades for your machine. The P1P HotBox is your solution for stable interior temperature, fume and odor control, reduced printer noise (20%), and convenient access to your Bambu Lab P1P and tools. Here is how the P1P HotBox accomplishes these 4 main properties:
1) Stable, Thermally Insulated, Interior Temperature
The HotBox is made of a sandwich of 3 materials selected to create structure and excellent insulating properties. The result is a lightweight semi-rigid construction that is so structural that you can place a few spool holders or even the AMS on top of the unit. The exterior is made of a flame retardant, ballistic Nylon 600D, the center is a structural honeycomb polymer panel selected for its insulation properties, and the interior is a metal lining that reflects and maintains optimal temperatures (between 35-60°C) for the duration of the print.
see for heat testing: youtu.be/uOE6ZOcFf98
2) Fume and Odor Control
Our entire HotBox line comes with an optional vent port where you can mount a fan to either filter or pipe the fumes out a window. An easy-to-make fume extractor, 3D models, parts lists, and instructions can be found here: cults3d.com/en/3d-model/tool/wham-bam-exhaust-fan-for-resin-hotbox and here is a video showing the build: youtube.com/shorts/bdKS05QcFiU
3) Reduce Machine Noise
The HotBox was able to get a nearly 20% reduction of noise in comparison to the bare P1P, the P1P with Bambu plastic panels, and even the X1 with its metal enclosure.
see for sound testing: youtu.be/HvBpUYNc-q0
4) Easy Access
Unlike other solutions, the P1P HotBox allows you to access either side of your Bambu Lab printer easily by just unzipping the side and swinging it open. The front door allows full access to the build plate and interior. And the whole unit is removable in less than 10 seconds should you need to work on your printer.
Other great features:
- A built-in thermometer (two LR44 batteries not included) to easily view the internal temperature.
- The front panel has a large clear window for maximum visibility which is a fully openable door that remains fixed to the side when you need front access. No more glass breakages, no more obstructions!
- The right side panel touts tool pouches and elastic straps to keep your most needed tools at arm's reach.
- The rear has openings for venting, the poop chute, the power chord, and the switch. Here is a poop bucket that will sit over the P1P HotBox: cults3d.com/en/3d-model/tool/poop-bucket-for-p1p-hotbox
- A removable patch should you ever mount a rear panel with an extra CPU fan.
- Bambu Lab P1P ptfe tube bracket: printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket
- The full line of printable accessories is available on our HotBox support page: whambamsystems.com/pages/hotbox-supportpage
View the entire FDM HotBox line and accessories: whambamsystems.com/collections/hotbox
Where to find us online:
WhamBamSystems.com
facebook.com/WhamBamSystems
twitter.com/whambamsystems
instagram.com/whambamsystems
linkedin.com/company/35445851
tiktok.com/@whambamsystems
reddit.com/user/WhamBamSystems
#3dprinting #BambuLabP1P
Meet the P1P HotBox: Crafted to complement your Bambu Lab P1P experience seamlessly. It is your solution for stable interior temperature, fume and odor control, reduced printer noise (20%+), and convenient access to your Bambu Lab P1P and tools. Upgrade your P1P with a P1P HotBox: whambamsystems.com/products/p1p-hotbox-3d-printer-enclosure
0:00 Introduction
0:17 Quick Installation
0:38 Why Do You Need a HotBox?
0:40 Printing High-Tech Filaments
1:40 Containing Fumes and Odors
2:21 Noise Reduction
2:45 More Features
4:45 Vent and Fume Exhaust
5:25 More Printable Upgrades
If you want to print ABS, Nylon, PC, and other high-temperature filaments, an enclosure is one of the best upgrades for your machine. The P1P HotBox is your solution for stable interior temperature, fume and odor control, reduced printer noise (20%), and convenient access to your Bambu Lab P1P and tools. Here is how the P1P HotBox accomplishes these 4 main properties:
1) Stable, Thermally Insulated, Interior Temperature
The HotBox is made of a sandwich of 3 materials selected to create structure and excellent insulating properties. The result is a lightweight semi-rigid construction that is so structural that you can place a few spool holders or even the AMS on top of the unit. The exterior is made of a flame retardant, ballistic Nylon 600D, the center is a structural honeycomb polymer panel selected for its insulation properties, and the interior is a metal lining that reflects and maintains optimal temperatures (between 35-60°C) for the duration of the print.
see for heat testing: youtu.be/uOE6ZOcFf98
2) Fume and Odor Control
Our entire HotBox line comes with an optional vent port where you can mount a fan to either filter or pipe the fumes out a window. An easy-to-make fume extractor, 3D models, parts lists, and instructions can be found here: cults3d.com/en/3d-model/tool/wham-bam-exhaust-fan-for-resin-hotbox and here is a video showing the build: youtube.com/shorts/bdKS05QcFiU
3) Reduce Machine Noise
The HotBox was able to get a nearly 20% reduction of noise in comparison to the bare P1P, the P1P with Bambu plastic panels, and even the X1 with its metal enclosure.
see for sound testing: youtu.be/HvBpUYNc-q0
4) Easy Access
Unlike other solutions, the P1P HotBox allows you to access either side of your Bambu Lab printer easily by just unzipping the side and swinging it open. The front door allows full access to the build plate and interior. And the whole unit is removable in less than 10 seconds should you need to work on your printer.
Other great features:
- A built-in thermometer (two LR44 batteries not included) to easily view the internal temperature.
- The front panel has a large clear window for maximum visibility which is a fully openable door that remains fixed to the side when you need front access. No more glass breakages, no more obstructions!
- The right side panel touts tool pouches and elastic straps to keep your most needed tools at arm's reach.
- The rear has openings for venting, the poop chute, the power chord, and the switch. Here is a poop bucket that will sit over the P1P HotBox: cults3d.com/en/3d-model/tool/poop-bucket-for-p1p-hotbox
- A removable patch should you ever mount a rear panel with an extra CPU fan.
- Bambu Lab P1P ptfe tube bracket: printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket
- The full line of printable accessories is available on our HotBox support page: whambamsystems.com/pages/hotbox-supportpage
View the entire FDM HotBox line and accessories: whambamsystems.com/collections/hotbox
Where to find us online:
WhamBamSystems.com
facebook.com/WhamBamSystems
twitter.com/whambamsystems
instagram.com/whambamsystems
linkedin.com/company/35445851
tiktok.com/@whambamsystems
reddit.com/user/WhamBamSystems
#3dprinting #BambuLabP1P
