MediaTek Genio 520 Evaluation Kit - Unboxing | DigiKey @DigiKeyProductDiscovery
MediaTek Genio 520 Evaluation Kit - Unboxing | DigiKey  @DigiKeyProductDiscovery
Uploaded November 2026 | Updated November 2026, 19 hours ago
We take a look at the Genio 520 Evaluation Kit from MediaTek. With an on-chip NPU, it enables low-power edge AI and GenAI applications in industrial, commercial, and consumer devices.

Inside the box, you’ll find the EVK main board with a pre-installed 7” LCD screen, two camera boards, two FPCs, two Wi-Fi and Bluetooth antennas, and a USB-C power supply.

In this demo, we’re going to replace the pre-loaded Android image with MediaTek’s Yocto Linux image.

Insert the FPCs into the camera modules and into the corresponding connectors on the main board, then mount the cameras in the slot on the side of EVK baseplate. Install the antennas on the ANT1 and ANT2 connectors. Configure the EVK boot device to UFS by changing DIP switch 1-1 to off and switch 1-2 to on, DIP switch 2-1 to Off and 2-2 to on, and DIP switch 4-1 to on and 4-2 to off. Next, we need to add a jumper to J496; also add a jumper to J508, connecting pins 1 and 2. We also need to connect a USB cable to UART0 to interact with the kit and another to USB 3.2 P0 to flash the board. Then connect the USB-C power supply to the USB-PD port.

Follow the quick start guide to setup the tools and download the pre-built private board image. Then run the genio-flash command and when the prompt shows “Looking for a MediaTek SoC…” hold the download button, press reset, and wait until you see Erasing mmc0 before you release the download button. Once the process completes, you should see the Linux desktop on the kit’s screen and can login as root with no password on the terminal. There are also NNStreamer and OpenGL ES demos included with the build to test the Genio 520’s integrated NPU and GPU.

genio.mediatek.com/doc/iot-yocto/latest/sw/yocto/download.html#prebuilt-board-images
digikey.com/en/products/detail/amobile-solutions-corp/Genio-520-EVK/28872921
genio.mediatek.com/doc/iot-yocto/latest/sw/yocto/download.html#prebuilt-board-images

Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
MediaTek Genio 520 Evaluation Kit - Unboxing | DigiKeyAxiForce Tubeaxial Fans from ebm-papst PIO | DigiKeyPISA-M Electronic Circuit Breakers from PULS PIO | DigiKeyLattice Semiconductor Corporation Holoscan Sensor Bridge - Unboxing | DigiKeyStandard Vitalis Buccaneer Connectors from Bulgin | DigiKeySurgeSwitch TDS5311P 1-Line EOS Protection from Semtech PIO | DigiKeyAnalog Devices AD5710 8-Channel 16-bit Configurable IDAC VDAC – PTM | DigiKeyInfineon CoolGaN™ Power Semiconductors for Low-Power SMPS PIO | DigiKeyAdvantech WISE-4250 Industrial Wi-FI IO Modules - Unboxing | DigiKeyonsemi NCV760040 Evaluation Kit - Unboxing | DigiKeyRACPRO1-4SP 4-Channel e-Fuses from RECOM Power PIO | DigiKeyBanner Engineering SD50 Status Display - Unboxing | DigiKey
DigiKey Product Discovery |

MediaTek Genio 520 Evaluation Kit - Unboxing | DigiKey

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER