Lattice Semiconductor Corporation Holoscan Sensor Bridge - Unboxing | DigiKey @DigiKeyProductDiscovery
Lattice Semiconductor Corporation Holoscan Sensor Bridge - Unboxing | DigiKey  @DigiKeyProductDiscovery
Uploaded August 2026 | Updated November 2026, 1 day ago
We take a look at the Holoscan Sensor Bridge Board Kit from Lattice Semiconductor Corporation. It's a sensor to Ethernet bridge board kit for rapidly designing and prototyping intelligent edge systems with diverse sensor input interfaces and protocols.

Inside the box, you'll find the CertusPro-NX Sensor to Ethernet Bridge Board and a USB Type-C to USB Type-C cable.

The kit is designed as a bridge between an NVIDIA Jetson Developer Kit and diverse sensor inputs including cameras, radars, lidars, and more. This enables developers to rapidly design connectivity bridging applications from sensor to compute.

The design is based on two Lattice FPGAs: a CrossLink-NX and a CertusPro-NX. Both of these are programmable via the same programming header, and the board is powered via the USB-C connector.

The CrossLink-NX is used to process camera data and pass it to the CertusPro-NX. The 120-pin camera connector can support up to 2 MIPI channels with 4 data lanes each, and supports a variety of cameras including the Leopard Imaging 8 megapixel stereo camera.

The CertusPro-NX is also connected to an FMC HPC connector on the back of the board. This provides 32 LVDS lanes and 4 JESD204B lanes plus their clocks, and it allows you to expand the hardware capabilities of the board with standard mezzanine cards, adding radar, lidar, RF ADCs and DACs, and other high-bandwidth sensors.

The CertusPro-NX packetizes all of this data and sends it to the Nvidia Jetson platform over the 10 gigabit ethernet SFP plus ports. The use of ethernet allows the sensors to be easily located adjacent to or remotely from the platform, providing flexible deployment. This scalable sensor streaming solution ensures data provided at the FPGA sensor interface port arrives in DRAM with low-latency and high throughput.

digikey.com/en/products/detail/lattice-semiconductor-corporation/LF-SNSR-ETH-EVN/25661892

Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
Lattice Semiconductor Corporation Holoscan Sensor Bridge - Unboxing | DigiKeyStandard Vitalis Buccaneer Connectors from Bulgin | DigiKeySurgeSwitch TDS5311P 1-Line EOS Protection from Semtech PIO | DigiKeyAnalog Devices AD5710 8-Channel 16-bit Configurable IDAC VDAC – PTM | DigiKeyInfineon CoolGaN™ Power Semiconductors for Low-Power SMPS PIO | DigiKeyAdvantech WISE-4250 Industrial Wi-FI IO Modules - Unboxing | DigiKeyonsemi NCV760040 Evaluation Kit - Unboxing | DigiKeyRACPRO1-4SP 4-Channel e-Fuses from RECOM Power PIO | DigiKeyBanner Engineering SD50 Status Display - Unboxing | DigiKeyNordic Semi nRF54LM20 Development Kit - Unboxing | DigiKeyAnalog Devices ADA4356 Current-Input µModule Evaluation Board - Unboxing | DigiKeyPFE1500FB Series AC/DC Power Modules from TDK-Lambda PIO | DigiKey
DigiKey Product Discovery |

Lattice Semiconductor Corporation Holoscan Sensor Bridge - Unboxing | DigiKey

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER