Uploaded March 2024 | Updated September 2026, 1 week ago
Overview and test of this extremely versatile but underrated board. A must for fixed wing flyers that want as much telemetry as the drone guys!!
🔗 Please tell me if any of the links provided no longer work!!
📃 Matek Site: mateksys.com/?portfolio=crsf-pwm#tab-id-3
📃 Matek Configurator and Firmware.
🛒 MATEKSYS CRSF TO PWM CONVERTER https://s.click.aliexpress.com/e/_DBIPc0H
🛒 HGLRC M100-5883 M10 GPS Module https://s.click.aliexpress.com/e/_DCJPMDJ
🛒 MATEKSYS ELRS-R24-D Diversity Double Antenna Receiver https://s.click.aliexpress.com/e/_Dd5uFLB
🛒 MS5611 Barometric Pressure High-precision Sensor Module https://s.click.aliexpress.com/e/_DDU0sf3
🛒 USB CP2102 to TTL https://s.click.aliexpress.com/e/_DDzPaYN
🛒 DIY high quality flexible silicone wire https://s.click.aliexpress.com/e/_DemLYGl
🚀 Introduction to Matek CRSF PWM Module: Explains features such as PWM outputs, voltage sensing up to 90A, and integration with GPS and barometer sensors for telemetry data.
✂️ Assembly and Configuration: Demonstrates soldering techniques, configuring UART ports, and the use of a CP2102 USB to TTL board for firmware updates.
🔧 Firmware Upgrades: Details challenges with upgrading to firmware version 2.6 and praises Matek’s responsive customer support for resolving flashing issues.
🛠️ Barometer Integration: Attempts to integrate SPL 06 module, troubleshooting issues, and eventual success with the MS5611 module for accurate altitude and temperature readings.
📡 GPS and Telemetry Setup: Highlights integration of GPS module with Galileo satellite support, providing telemetry data such as voltage, current, altitude, and speed.
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
0:00 Intro
2:36 Basic Wiring
4:48 Upgrade Firmware
6:54 Upgrade Rx Firmware
8:30 Baro Wiring
11:30 New Baro Wiring
12:51 Final Test and Radio Telemetry
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
Overview and test of this extremely versatile but underrated board. A must for fixed wing flyers that want as much telemetry as the drone guys!!
🔗 Please tell me if any of the links provided no longer work!!
📃 Matek Site: mateksys.com/?portfolio=crsf-pwm#tab-id-3
📃 Matek Configurator and Firmware.
🛒 MATEKSYS CRSF TO PWM CONVERTER https://s.click.aliexpress.com/e/_DBIPc0H
🛒 HGLRC M100-5883 M10 GPS Module https://s.click.aliexpress.com/e/_DCJPMDJ
🛒 MATEKSYS ELRS-R24-D Diversity Double Antenna Receiver https://s.click.aliexpress.com/e/_Dd5uFLB
🛒 MS5611 Barometric Pressure High-precision Sensor Module https://s.click.aliexpress.com/e/_DDU0sf3
🛒 USB CP2102 to TTL https://s.click.aliexpress.com/e/_DDzPaYN
🛒 DIY high quality flexible silicone wire https://s.click.aliexpress.com/e/_DemLYGl
🚀 Introduction to Matek CRSF PWM Module: Explains features such as PWM outputs, voltage sensing up to 90A, and integration with GPS and barometer sensors for telemetry data.
✂️ Assembly and Configuration: Demonstrates soldering techniques, configuring UART ports, and the use of a CP2102 USB to TTL board for firmware updates.
🔧 Firmware Upgrades: Details challenges with upgrading to firmware version 2.6 and praises Matek’s responsive customer support for resolving flashing issues.
🛠️ Barometer Integration: Attempts to integrate SPL 06 module, troubleshooting issues, and eventual success with the MS5611 module for accurate altitude and temperature readings.
📡 GPS and Telemetry Setup: Highlights integration of GPS module with Galileo satellite support, providing telemetry data such as voltage, current, altitude, and speed.
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
0:00 Intro
2:36 Basic Wiring
4:48 Upgrade Firmware
6:54 Upgrade Rx Firmware
8:30 Baro Wiring
11:30 New Baro Wiring
12:51 Final Test and Radio Telemetry
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
