Uploaded April 2025 | Updated September 2026, 1 week ago
Always on the lookout for beginner friendly planes I present the Sky Surfer X10!!
It is a good size at 1.4 M wingspan in a tail dragger configuration it ticks all the boxes. Let's build it!
🔗 Please tell me if any of the links provided no longer work!!
🛒 MD-TECH Sky Surfer X10 banggood.com/custlink/mGmSB4Drqv?title=MD-TECH Sky Surfer X10
🛒 ToolkitRC M8S 400w 18A Balance Charger/Discharger Servo Tester https://s.click.aliexpress.com/e/_Dl9svGN
🛒 RadioMaster Pocket Hall Gimbal Transmitter https://s.click.aliexpress.com/e/_DBpJzqt
🛒 ELRS 2.4Ghz PWM 7CH CRSF Receiver https://s.click.aliexpress.com/e/_oo40LIH
✈️ Beginner-Friendly Aircraft Discovery
The Sky Surfer X10 is introduced as an affordable and accessible RC plane for beginners. Unlike the more expensive AeroScout, this plane offers a lower cost and avoids ecosystem lock-in, particularly with Spektrum systems.
📦 Detailed Unboxing and Components Review
The box includes a 1.4-meter wingspan plane, carbon fiber tubes, canopy, laser-cut plywood parts, and necessary hardware like servos, motor, and propeller. All elements are carefully examined for quality and completeness.
🔧 Build Strategy and Common Pitfalls
The video explores assembly in detail, from body and tail setup to servo alignment. Mistakes such as using thread locker on plastic and misplacing tube mounts are highlighted to help viewers avoid them.
🧩 Tail and Wing Assembly Techniques
Tail sections include reinforced elevator and carbon tubes. The wings feature slight dihedral and are bonded with epoxy and E6000 glue. Proper orientation, cutouts, and structural enhancements are explained.
🛠️ Electronics and Functional Check
Components like a 2212 1400KV motor, 30A ESC, XT60 connector, and servos are reviewed. Viewers are guided through mounting, testing motor direction, and verifying control surface behavior.
📏 Final Setup and Center of Gravity Tips
Final assembly includes battery positioning, aileron connections, and center of gravity alignment. Transmitter configuration and telemetry via ELRS are demonstrated.
🪂 Ready for Flight
The RC plane is completely assembled and undergoes final functional testing, ensuring all control surfaces respond properly and confirming it’s ready for its maiden flight.
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
00:00,Unboxing and Initial Impressions
00:31,Decals and Components Overview
01:02,Wings and Bag of Bits
01:36,Electronics and Hardware Inspection
02:07,Comparison with Aeros Scout
02:39,Cost and System Lock-In Discussion
03:11,Material Quality and Body Assembly
03:42,Assembly Complexity vs Repairability
04:13,Elevator and Tail Reinforcement
04:45,Wings Structure and Carbon Comparison
05:16,Motor and ESC Details
05:47,Servos and Connector Accessories
06:19,Body Tube Assembly
06:50,Internal Screws and Ply Support
07:21,Top Body Reinforcements
07:52,Securing Body Components
08:23,Landing Gear Support Plate
08:54,Tail Section Precautions
09:25,Elevator Reinforcement and Thread Locker Issue
09:57,Tail Alignment and Gluing
10:28,Tail Wheel Mounting
10:59,Tail Assembly Error and Fix
11:30,Tube Insertion and Spacer Challenge
12:01,Fuselage Rod Assembly
12:32,Tube Depth Concern and Alternatives
13:04,Final Ply Plate and Rubber Band Mount
13:35,Motor Assembly and Screw Advice
14:06,Final Motor Mounting
14:37,Propeller Installation and Servo Setup
15:09,Rudder Assembly and Final Adjustments
15:40,Control Surface Completion
16:11,Wing Assembly Introduction
16:42,Center Epoxy and Alignment
17:13,Ply Strengtheners and Glue Choices
17:45,Decals and Servo Checks
18:16,Servo Centering and Installation
18:47,Wing Completion and Control Rods
19
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
Always on the lookout for beginner friendly planes I present the Sky Surfer X10!!
It is a good size at 1.4 M wingspan in a tail dragger configuration it ticks all the boxes. Let's build it!
🔗 Please tell me if any of the links provided no longer work!!
🛒 MD-TECH Sky Surfer X10 banggood.com/custlink/mGmSB4Drqv?title=MD-TECH Sky Surfer X10
🛒 ToolkitRC M8S 400w 18A Balance Charger/Discharger Servo Tester https://s.click.aliexpress.com/e/_Dl9svGN
🛒 RadioMaster Pocket Hall Gimbal Transmitter https://s.click.aliexpress.com/e/_DBpJzqt
🛒 ELRS 2.4Ghz PWM 7CH CRSF Receiver https://s.click.aliexpress.com/e/_oo40LIH
✈️ Beginner-Friendly Aircraft Discovery
The Sky Surfer X10 is introduced as an affordable and accessible RC plane for beginners. Unlike the more expensive AeroScout, this plane offers a lower cost and avoids ecosystem lock-in, particularly with Spektrum systems.
📦 Detailed Unboxing and Components Review
The box includes a 1.4-meter wingspan plane, carbon fiber tubes, canopy, laser-cut plywood parts, and necessary hardware like servos, motor, and propeller. All elements are carefully examined for quality and completeness.
🔧 Build Strategy and Common Pitfalls
The video explores assembly in detail, from body and tail setup to servo alignment. Mistakes such as using thread locker on plastic and misplacing tube mounts are highlighted to help viewers avoid them.
🧩 Tail and Wing Assembly Techniques
Tail sections include reinforced elevator and carbon tubes. The wings feature slight dihedral and are bonded with epoxy and E6000 glue. Proper orientation, cutouts, and structural enhancements are explained.
🛠️ Electronics and Functional Check
Components like a 2212 1400KV motor, 30A ESC, XT60 connector, and servos are reviewed. Viewers are guided through mounting, testing motor direction, and verifying control surface behavior.
📏 Final Setup and Center of Gravity Tips
Final assembly includes battery positioning, aileron connections, and center of gravity alignment. Transmitter configuration and telemetry via ELRS are demonstrated.
🪂 Ready for Flight
The RC plane is completely assembled and undergoes final functional testing, ensuring all control surfaces respond properly and confirming it’s ready for its maiden flight.
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from https://s.click.aliexpress.com/e/_APpCVa You can help me by using these links!
👍 Follow on Facebook facebook.com/1nformatica
💲 If you would like to buy me a coffee: paypal.me/1nformatica
00:00,Unboxing and Initial Impressions
00:31,Decals and Components Overview
01:02,Wings and Bag of Bits
01:36,Electronics and Hardware Inspection
02:07,Comparison with Aeros Scout
02:39,Cost and System Lock-In Discussion
03:11,Material Quality and Body Assembly
03:42,Assembly Complexity vs Repairability
04:13,Elevator and Tail Reinforcement
04:45,Wings Structure and Carbon Comparison
05:16,Motor and ESC Details
05:47,Servos and Connector Accessories
06:19,Body Tube Assembly
06:50,Internal Screws and Ply Support
07:21,Top Body Reinforcements
07:52,Securing Body Components
08:23,Landing Gear Support Plate
08:54,Tail Section Precautions
09:25,Elevator Reinforcement and Thread Locker Issue
09:57,Tail Alignment and Gluing
10:28,Tail Wheel Mounting
10:59,Tail Assembly Error and Fix
11:30,Tube Insertion and Spacer Challenge
12:01,Fuselage Rod Assembly
12:32,Tube Depth Concern and Alternatives
13:04,Final Ply Plate and Rubber Band Mount
13:35,Motor Assembly and Screw Advice
14:06,Final Motor Mounting
14:37,Propeller Installation and Servo Setup
15:09,Rudder Assembly and Final Adjustments
15:40,Control Surface Completion
16:11,Wing Assembly Introduction
16:42,Center Epoxy and Alignment
17:13,Ply Strengtheners and Glue Choices
17:45,Decals and Servo Checks
18:16,Servo Centering and Installation
18:47,Wing Completion and Control Rods
19
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
