Uploaded December 2017 | Updated November 2026, 2 days ago
Description: This how I changed my Master Brake Cylinder on my 1995 Nissan Pathfinder. If you're not familiar with automotive mechanics, STOP right here and get someone who knows what they're doing to do it for you or teach you.
DON'T do this if you're not experienced you can get killed, PERIOD! Seriously! If you do know what you're doing or are curious to what’s involved and what to do let’s get on with the video.
Side note if you have the ABS system on you're vehicle you may have to bleed the ABS valve as well. Here's Rust Belt Auto channel video on this; youtube.com/watch?v=Be5b2lgzpYQ Tell them Keith Noneya sent ya.
Parts & Tool lists are below:
Part used:
- Dorman M39976 Master Cylinder, approx. $55.00 on Amazon. There are other quality manufacturers that also sell this part. This just happens to be the part I used.
Tool Used:
- Haynes Repair manual. Chilton sells one to. You can pick them up at your automotive parts store. FREE! Complete Factory Service Manuals if you join the NICO CLUB, it's free.
*** After you create an account and password. ***
[ Then select "Service Manuals" on the right of the header, then on the left in Red, select "Nissan Factory Service Manuals" Link here: nicoclub.com/nissan-service-manuals.
- 6" ruler, I used a carpenter T-Square. A tape measure or just something with inches on it will work.
- Marker of some sort, to mark the tool you use to activate the plunger on the Master Cylinder.
- Screw Driver at least 3" long or a wood dowel to push in the Master Cylinder.
- 3/8" Drive Ratchet, regular about 6-9".
- 12mm 3/8" drive regular short socket.
- 6" 3/8" drive extension.
- Small, wire brush.
- Medium Sized Adjustable Wrench, Crescent Wrench.
- A small flashlight, or a drop light of some sort.
- 12mm Combination Wrench.
- 10mm Combination Wrench.
- A large towel, you care nothing about as it's going to get brake fluid all over it.
- A regular shop rag or equivalent.
- A Bench Vise or something to hold the Master Brake Cylinder while you bleed it before putting it on the car.
- A Brake Bleed Kit, or a helper to push on the brake pedal so you can bleed your brakes.
- A Siphon to get the old fluid out. You can leave the lid on the old brake cylinder, take it off, then dump the old fluid out into a container. Just try not to spill it on your paint.
- A small bottle to put the old brake fluid in to take to the recycle center.
Optional Tools:
- 12mm Reversible Ratchet Combination Wrench.
- Magnetized shop mirror.
- Disposable Nitrate Gloves.
- Wheel Chocks if your vehicle is on an incline.
Consumables Used:
- Small bottle of Dot 3 Brake Fluid, or whatever your shop manual advises you to use.
- Some Axle Grease or White Lithium Grease.
I hope this helped you experienced mechanics or at least entertained someone.
Please feel free to comment and pass on your knowledge.
If you learned something or would like to help my channel. Please give me a thumbs up for the time and effort, subscribe or both. Thanks for watching. Best Wishes n Blessings. Keith Noneya
Description: This how I changed my Master Brake Cylinder on my 1995 Nissan Pathfinder. If you're not familiar with automotive mechanics, STOP right here and get someone who knows what they're doing to do it for you or teach you.
DON'T do this if you're not experienced you can get killed, PERIOD! Seriously! If you do know what you're doing or are curious to what’s involved and what to do let’s get on with the video.
Side note if you have the ABS system on you're vehicle you may have to bleed the ABS valve as well. Here's Rust Belt Auto channel video on this; youtube.com/watch?v=Be5b2lgzpYQ Tell them Keith Noneya sent ya.
Parts & Tool lists are below:
Part used:
- Dorman M39976 Master Cylinder, approx. $55.00 on Amazon. There are other quality manufacturers that also sell this part. This just happens to be the part I used.
Tool Used:
- Haynes Repair manual. Chilton sells one to. You can pick them up at your automotive parts store. FREE! Complete Factory Service Manuals if you join the NICO CLUB, it's free.
*** After you create an account and password. ***
[ Then select "Service Manuals" on the right of the header, then on the left in Red, select "Nissan Factory Service Manuals" Link here: nicoclub.com/nissan-service-manuals.
- 6" ruler, I used a carpenter T-Square. A tape measure or just something with inches on it will work.
- Marker of some sort, to mark the tool you use to activate the plunger on the Master Cylinder.
- Screw Driver at least 3" long or a wood dowel to push in the Master Cylinder.
- 3/8" Drive Ratchet, regular about 6-9".
- 12mm 3/8" drive regular short socket.
- 6" 3/8" drive extension.
- Small, wire brush.
- Medium Sized Adjustable Wrench, Crescent Wrench.
- A small flashlight, or a drop light of some sort.
- 12mm Combination Wrench.
- 10mm Combination Wrench.
- A large towel, you care nothing about as it's going to get brake fluid all over it.
- A regular shop rag or equivalent.
- A Bench Vise or something to hold the Master Brake Cylinder while you bleed it before putting it on the car.
- A Brake Bleed Kit, or a helper to push on the brake pedal so you can bleed your brakes.
- A Siphon to get the old fluid out. You can leave the lid on the old brake cylinder, take it off, then dump the old fluid out into a container. Just try not to spill it on your paint.
- A small bottle to put the old brake fluid in to take to the recycle center.
Optional Tools:
- 12mm Reversible Ratchet Combination Wrench.
- Magnetized shop mirror.
- Disposable Nitrate Gloves.
- Wheel Chocks if your vehicle is on an incline.
Consumables Used:
- Small bottle of Dot 3 Brake Fluid, or whatever your shop manual advises you to use.
- Some Axle Grease or White Lithium Grease.
I hope this helped you experienced mechanics or at least entertained someone.
Please feel free to comment and pass on your knowledge.
If you learned something or would like to help my channel. Please give me a thumbs up for the time and effort, subscribe or both. Thanks for watching. Best Wishes n Blessings. Keith Noneya










