Peter Millard | Marking Out Basics: Don't fight the fit! @10MinuteWorkshop | Uploaded 3 weeks ago | Updated 9 minutes ago
Avoid this mistake! Whatever you use - dowels, Dominos, biscuits or Clamex - you can fit a cabinet together without turning it into a fight and in this one I share my process for marking out cabinet components so they fit together easily. Enjoy!
=======================
Table of Contents:
=======================
00:00 Introduction
00:49 Consistent trumps accurate
02:04 Face side and edge
03:40 Sides, top & base
04:53 Rough positions
06:46 Accurate machining positions
08:10 Consistent edge reference...
08:57 ...avoids this!
09:50 Edge markings
10:39 Real-time markup
13:38 Outro
=======================
Related content:
=======================
Base cabinet basics - bit.ly/BaseCabBasics
Cabinetry basics - http://bit.ly/CabinetryBasics
Jointing systems - http://bit.ly/JointingSystems
Cabinet tips - http://bit.ly/CabinertTips
All about doors - http://bit.ly/AllAboutDoors
Client work, bedroom furniture - http://bit.ly/ClientBedroomFurniture
Client work, shelves and storage - http://bit.ly/ClientShelvesAndStorage
Oak and Birch Ply drawers - youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - youtu.be/EBJZlI9IVlI
No going back (Our Big Build primer) - youtu.be/eULepp_7CIM
DIY SYS-TOTE - youtu.be/vhW04TJCgMU
=======================
Newsletter and memberships:
=======================
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
=======================
Store:
=======================
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
=======================
Affiliate Links:
=======================
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Bahco combi squares - amzn.to/3B6tbwL
Hinge template (saddle square) - amzn.to/4gurF7G
Avoid this mistake! Whatever you use - dowels, Dominos, biscuits or Clamex - you can fit a cabinet together without turning it into a fight and in this one I share my process for marking out cabinet components so they fit together easily. Enjoy!
=======================
Table of Contents:
=======================
00:00 Introduction
00:49 Consistent trumps accurate
02:04 Face side and edge
03:40 Sides, top & base
04:53 Rough positions
06:46 Accurate machining positions
08:10 Consistent edge reference...
08:57 ...avoids this!
09:50 Edge markings
10:39 Real-time markup
13:38 Outro
=======================
Related content:
=======================
Base cabinet basics - bit.ly/BaseCabBasics
Cabinetry basics - http://bit.ly/CabinetryBasics
Jointing systems - http://bit.ly/JointingSystems
Cabinet tips - http://bit.ly/CabinertTips
All about doors - http://bit.ly/AllAboutDoors
Client work, bedroom furniture - http://bit.ly/ClientBedroomFurniture
Client work, shelves and storage - http://bit.ly/ClientShelvesAndStorage
Oak and Birch Ply drawers - youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - youtu.be/EBJZlI9IVlI
No going back (Our Big Build primer) - youtu.be/eULepp_7CIM
DIY SYS-TOTE - youtu.be/vhW04TJCgMU
=======================
Newsletter and memberships:
=======================
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
=======================
Store:
=======================
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
=======================
Affiliate Links:
=======================
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Bahco combi squares - amzn.to/3B6tbwL
Hinge template (saddle square) - amzn.to/4gurF7G
![11 Routers - or is that 13?? [video 446]](https://i.ytimg.com/vi/Y_gLxlCcY5Y/hqdefault.jpg "11 Routers - or is that 13?? [video 446]
Why would anyone have that many routers?? Well, in this video I talk you through the routers on my shelf, because honestly, I’ve never had so many comments about a power tool before! Enjoy!
My clamp guides are back in my Etsy store, here - https://bit.ly/ClampGuides
Woah, sold out. More on the way - keep checking back! 👍
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos mentioned:-
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
$135 Deros? - https://youtu.be/46Ws3Bgp_bA
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/mentioned in this video:-
Festool MFK 700 edge trimmer - https://amzn.to/3chF7Na
Trend T4 router - https://amzn.to/3ckBOF8
Festool OF 2200 - https://amzn.to/31eA8qb
Trend T11 - https://amzn.to/3sk1Fm5
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Katsu corded - https://amzn.to/3rj2HgO
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+ + + + +")
![Workshop Cabinet with Modular Storage [video 467]](https://i.ytimg.com/vi/Ybhnnqro4Cs/hqdefault.jpg "Workshop Cabinet with Modular Storage [video 467]
Continuing the workshop makeover, I found some inspiration from Michael Alm’s recent workshop tour video, and an old Adam Savage video, to make a set of workshop cabinets with modular storage. The nail gun module shown here is a ‘proof of concept’ design made from whatever scraps of sheet materials - mostly MDF - that I had to hand, but if it works out as I expect it to I can see myself remaking it in plywood. Enjoy!
++++++++
Michael Alm on YouTube - https://www.youtube.com/user/mishkelschlakong
Michael’s Shop Tour - https://www.youtube.com/watch?v=AhSy2btT9jM
Adam Savage tool trolley video - https://www.youtube.com/watch?v=TWQAYfGxsPE
++++++++
Other videos mentioned:-
Scrapwood workshop shelves - https://youtu.be/4n62fT4ncW8
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Random Orbital Disc Sander - https://youtu.be/jH2afycjcbM
Rail Jigs - https://youtu.be/idAfnNIQ5H4
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate and eBay Partner, I earn from qualifying purchases made through these links. As a Benchdogs affiliate I may earn from qualifying sales; use offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square - https://bit.ly/bench-dogs
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Two Big saws from Erbauer and Triton [**Gifted][video 442]](https://i.ytimg.com/vi/ZCVPNFeHAQ8/hqdefault.jpg "Two Big saws from Erbauer and Triton [**Gifted][video 442]
In this video I take a quick look at couple of larger than average mid-range #plungesaws, and try to figure out the difference between them. Re. blade sizes mentioned in the video, there is a wider choice of blades at the 184 x 20mm size, which begs the question - why design your saw around a 185mm blade?? OEM blades may be available from third parties.
**In the interests of transparency the #Triton saw was supplied for review, and the #Erbauer saw I bought myself for the purposes of this comparison. I have not been paid to make this video or say nice things about the products. I need an agent. Or an accountant...
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos mentioned:-
Cheap vs Cheapest - https://youtu.be/nZGt_LqR5O8
Festool or Mafell - https://youtu.be/5kqui1b0SbU
A Lidl blade upgrade - https://youtu.be/6TNaspl5DpY
Tracksaw workshop - http://bit.ly/TracksawWorkshop (playlist)
More about blades - https://youtu.be/jR25DirM34E
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Erbauer plunge saw - https://www.screwfix.com/p/erbauer-erb690csw-185mm-electric-plunge-saw-240v/3875p (links to specs and full manual)
Triton TTS 185 kit - http://www.tritontools.com/en-GB/Product/Power%20Tools/Saws/TTS185KIT (links to specs and manual)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Other handy gear:-
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Travel toolkits; something for the weekend?? [video 526]](https://i.ytimg.com/vi/_kRVjFIPe78/hqdefault.jpg "Travel toolkits; something for the weekend?? [video 526]
Whenever I go away I like to take a small toolkit with me, and while the Leatherman-style multitools work well, getting one without a blade for travel can be a problem; so I started looking for options, and here’s what I’ve put together* Enjoy!
#EDC #BladeFree #Toolkit
* All items shown in this video were purchased by me. Travel toolkit shopping list is here - https://amzn.to/3lXrtqi or browse for individual items below.
UK Government guidance on carrying knives can be found here - https://www.gov.uk/buying-carrying-knives
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Subscibe to the monthly newsletter at 10minuteworkshop.com for updates, product news and discounts
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM are significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Gift List (and projects) Playlist - https://bit.ly/10MWGiftLists
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Basic Builds playlist - https://bit.ly/BasicBuilds
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
++++++++
Shop the video
Travel toolkit list here - https://amzn.to/3lXrtqi
Visit my Amazon store here - 10MinuteAmazon.com
Browse the full Basic Build toolset here - https://amzn.to/3AcPJYW
Browse the Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
I use Amazon OneLink - these links should open in your local Amazon store
Smallrig camera tool, no flat bit - https://amzn.to/41MfStB
Smallrig camera tool, with flat bit - https://amzn.to/41JeNTm
Knipex Cobra XS grips - https://amzn.to/3Nh2wkR
Leatherman Skeletool - https://amzn.to/3LBOmt4
Utili-key - https://amzn.to/3LeMtBs
Wera tool check plus - https://amzn.to/40GoiBD
Sabrecut mini micro ratchet handle - https://amzn.to/3LjaV4u
Victorinox bit wrench set - https://amzn.to/3AHEuaV
Wera compact bit holder - https://amzn.to/3HlIQIM
Victorinox pocket knife - https://amzn.to/427KB3Z
Wera Bitcheck 7 - https://amzn.to/3AHECqV
Stainless steel graphics knife - https://amzn.to/3DnWzvJ
Wera stubby driver - https://amzn.to/41H7RpQ
Nail clippers / wire cutters - https://amzn.to/3AC1Sa8
Weekend backpack (opens like a suitcase) - https://amzn.to/3oQrai0")
![Birch ply bedside cabinet build [Gifted/Ad**][video 432]](https://i.ytimg.com/vi/aJNzOZCHrGU/hqdefault.jpg "Birch ply bedside cabinet build [Gifted/Ad**][video 432]
In this video I build a wall-hung bedside #cabinet from Birch ply using the Peanut 2 connecting system from @IntelligentFixings, available through @AxminsterTools and direct from Intelligent Fixings. Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
Free bedside cabinet plans from Intelligent Fixings - https://bit.ly/bedsideplans
+++++++++
Peanut 2 system at Axminster Tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanutr-2-connecting-system-package-720761
Peanut 2 system from Intelligent Fixings - http://shop.intelligentfixings.com?ref=10minuteworkshop
Axminster tools on YouTube - https://www.youtube.com/user/axminstertoolcentre
Intelligent Fixings on YouTube - https://www.youtube.com/channel/UCk4S-y5jUNpWNBV4mcy8CHQ
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
426, Portable Bench - https://youtu.be/7OqrljJHOaw
360, Domino, doweller or Zeta - https://youtu.be/m78BZHu-uuA
270, 10 years of Domino P1 - https://youtu.be/7oxd2Qnvyw0
330, Clamex or Connect - https://youtu.be/TzOAwo3vpqI
429 Peanut 2 connector https://youtu.be/AjS2cAiQyzY
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Peanut 2 system at Axminster Tools - http://bit.ly/Peanut2connector
Peanut 2 system from Intelligent Fixings - https://bit.ly/intelligentFixings
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
Other useful gear…
Benchdogs rail square - https://bit.ly/bench-dogs
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)
Mirka Deros 240v (NB better prices available elsewhere) - https://amzn.to/37DbmCH
Festool ETS 125 - https://amzn.to/2RSAEDD (US: https://amzn.to/2JZy0t5)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
+++++++++")
![Metabos £200/$250 MFT - Hit or Miss? [video 580]](https://i.ytimg.com/vi/aWozkUUDdc8/hqdefault.jpg "Metabos £200/$250 MFT - Hit or Miss? [video 580]
In this one I take a look at the new #Metabo MWB100 ‘MFT*-alike’ #portable #workbench and see if it lives up to the promise it made on paper.
I am not associated or affiliated in any way with Metabo, I purchased this bench as any customer would, and I bought mine from ProTrade, here - https://www.protrade.co.uk/product/metabo-mwb100-multifuction-workbench/
*MultiFunction Table, after Festool’s MFT/1080 and MFT/3
Table of Contents:
00:00 Introduction
00:39 Overview
01:51 Overview - accessories
02:25 Overview - MFT-style top
02:54 Overview - weight and portability
03:15 Metabo MWB 100 Competitors
04:32 What I Like about the Metabo MWB 100
06:07 What I dont like...
09:29 Things I can take or leave
10:30 Who is this bench for?
11:27 Conclusion
Related content:
Other videos and playlists of interest:-
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Suggested: Benchdogs reaming tool - https://benchdogs.co.uk/products/20mm-mft-top-reamer?_pos=1&_sid=d95976cf3&_ss=r&ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![Patchwork side table without a table saw [video 512]](https://i.ytimg.com/vi/bq7amS5MkPI/hqdefault.jpg "Patchwork side table without a table saw [video 512]
In this one I make a #patchwork Mondrian-style side #table in Finsa Fibracolour MDF, a ‘simple’ project that pushes me and my tools to the limits - and does have me considering the purchase of a #tablesaw. Enjoy!
Oh, and I also mistakenly say 18th century... instead of 1870s - how about we just accept that as a slip of the tongue and let me know what you think about the table, eh? 🤷♂️
I used Finsa Fibracolour for this table, and thanks so much to FinsaUK for the larger than usual samples.
For Fibracolour cut to size see https://www.cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100/
Or contact @FinsaUK on Instagram for stockists - https://www.instagram.com/finsauk/
More information about Piet Mondrian here - https://en.wikipedia.org/wiki/Piet_Mondrian
Keith Brown clear wax - https://www.etsy.com/uk/listing/1314396026/kb-oil-wax-wood-finish-clear-250ml-non
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Ikea Shelves to Basic Boxes with Funky Fronts - https://youtu.be/c0BH6TDSSCI
Peanut 2 MiniJig - https://youtu.be/DsvpAjGizKs
Peanut 2 System & Projects Playlist - https://bit.ly/Peanut2system
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy consumables & gear:-
Note that prices fluctuate - some have risen since I made my purchases.
Keith Brown clear wax - https://www.etsy.com/uk/listing/1314396026/kb-oil-wax-wood-finish-clear-250ml-non
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Finsa Fibracolour cut to size - https://www.cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100/
O3Adhesive CA glue. Use offer code 10MinuteWorkshop at checkout for 15% discount across the board at O3 Adhesives - https://www.o3adhesives.co.uk/?sca_ref=2935180.i6dkKK25CM
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![DIY Systainer Roll Board [video 451]](https://i.ytimg.com/vi/bu7CKKugP8g/hqdefault.jpg "DIY Systainer Roll Board [video 451]
In this video I make a #DIY #plywood roll-board or SYS-roll for Tanos or Festool #systainers, or any other stacking toolbox, or tool. Or box 🤷♂️ Enjoy!
Roll-board plans available for download on my Etsy now - http://bit.ly/roll-board
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - https://youtu.be/enmHfvgRTrw
5 Festool gamechangers - https://youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Set of castors - https://amzn.to/3vy3DjR (US: [similar] https://amzn.to/3eIXwm9)
T-loc Mounting brackets available from Karl @strawbyteworkshop - https://www.strawbyte.com/merchandise/systainer-mounting-kit-base-for-t-loc-style-cases-5-piece-set
Repair plates - https://amzn.to/3xD8YYV (US: [similar] https://amzn.to/3xE9SVf0)
Trend T11 router - https://amzn.to/3eJxzTm (US: 🤷♂️)
Trend double-bearing trimming bit - https://amzn.to/3gU8FTC (US: [similar] https://amzn.to/3nDZlol)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Everbuild Lumberjack 5-minute PU adhesive - https://amzn.to/2rSAAMn (US: nope)
Holesaw set (similar) - https://amzn.to/2RjGVwX (US: [similar] https://amzn.to/2RcHbxS)
Wire brush set - https://amzn.to/3e9ykpL (US: [similar] https://amzn.to/3eNUdKb)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Lightweight Folding trestles from a half-sheet of plywood [video 427]](https://i.ytimg.com/vi/bvZkRE6rCEs/hqdefault.jpg "Lightweight Folding trestles from a half-sheet of plywood [video 427]
In this video I make a pair of #lightweight #folding #trestles to go with my portable bench from a half a sheet of Birch ply and a few offcuts. Enjoy!
Plans available here:-
Etsy Trestle plans - https://bit.ly/TrestlePlans
Etsy Bench plans - https://bit.ly/PortableBench
Etsy Bench & trestle plan bundle - https://bit.ly/Bench-and-trestle
++++++++
Other videos mentioned:-
426, Portable Bench Build - https://youtu.be/7OqrljJHOaw
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Piano hinge - https://amzn.to/3nfkq7a
Dowel jig -https://amzn.to/36ygsQq
3 x 16mm screws - https://amzn.to/38FNNeP
8 x 30mm dowels - https://amzn.to/38yb16J
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
+++++++++
Other useful gear…
Benchdogs rail square - https://bit.ly/bench-dogs
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![Turn Ikea Shelves into Basic Boxes with Fancy Fronts [video 465]](https://i.ytimg.com/vi/c0BH6TDSSCI/hqdefault.jpg "Turn Ikea Shelves into Basic Boxes with Fancy Fronts [video 465]
Continuing the workshop makeover, in this longer video I find some old #Ikea shelves and turn them into basic #storage boxes - with a little Birch ply and a #Mondriaan twist for interest. Enjoy!
++++++++
Painting “03” by Piet Mondriaan referenced under Public Domain, image available at Wikimedia Commons - https://commons.wikimedia.org/wiki/File:Piet_Mondriaan 03.jpg
More information about Piet Mondriaan here - https://en.wikipedia.org/wiki/Piet_Mondrian
++++++++
Other videos mentioned:-
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Scrapwood workshop shelves - https://youtu.be/4n62fT4ncW8
Birch ply and wedge side table - https://youtu.be/Vczc9OS7aFE
Bedside cabinet - https://youtu.be/aJNzOZCHrGU
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Trend 19mm double-bearing flush trimmer bit - https://amzn.to/3xQOhaV (US: 🤷♂️)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square - https://bit.ly/bench-dogs
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![How to Scribe a face-frame to a wall P2 of 3 [video 353][Gifted/Ad**]](https://i.ytimg.com/vi/c2IthMh47nM/hqdefault.jpg "How to Scribe a face-frame to a wall P2 of 3 [video 353][Gifted/Ad**]
How to Scribe a face-frame to a wall P2 of 3 [video 353][Gifted/Ad**]")
