3D-PrintCreator | ▼ Marking metal with a cheap laser and mustard | different types of mustard tested @3dPrintCreator | Uploaded January 2021 | Updated October 2024, 4 hours ago.
Watch Next: Much more powerful laser engraver youtu.be/ohVKv9PZlKQ
Did not see the previous video? Watch it here: youtu.be/W9n7gOlvy9w
I used this cheap laser engraver: Ortur Master II http://gbe.st/302mPvP
After uploading my previous video about engraving stainless steel with a cheap diode laser machine, I noticed that quite a lot of people had problems getting the same result as I had in my video. I spent a long time looking for the root cause of this problem and finally found that the mustard I used was the answer to this question. After trying different types of mustard for metal engraving, I found out that some mustards did not work at all, while others showed a very good result. The difference was really huge and I, therefore, advise everyone to experiment with different types of mustard to get a good result.
If you use the right kind of mustard it is certainly possible and you mark metal with a cheap laser and mustard. So try different types of mustard and see what it can do for you.
▼ If you want to buy me a nice cold drink, please do so:
support.3d-printcreator.com
▼ Subscribe to me on YouTube:
subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
twitter.3d-printcreator.com
▼ Or on my website:
3d-printcreator.com
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#OrturMasterLaserEngraver #MarkingStainlessSteel #LaserMarkingSteel
Thanks for watching this video.
Watch Next: Much more powerful laser engraver youtu.be/ohVKv9PZlKQ
Did not see the previous video? Watch it here: youtu.be/W9n7gOlvy9w
I used this cheap laser engraver: Ortur Master II http://gbe.st/302mPvP
After uploading my previous video about engraving stainless steel with a cheap diode laser machine, I noticed that quite a lot of people had problems getting the same result as I had in my video. I spent a long time looking for the root cause of this problem and finally found that the mustard I used was the answer to this question. After trying different types of mustard for metal engraving, I found out that some mustards did not work at all, while others showed a very good result. The difference was really huge and I, therefore, advise everyone to experiment with different types of mustard to get a good result.
If you use the right kind of mustard it is certainly possible and you mark metal with a cheap laser and mustard. So try different types of mustard and see what it can do for you.
▼ If you want to buy me a nice cold drink, please do so:
support.3d-printcreator.com
▼ Subscribe to me on YouTube:
subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
twitter.3d-printcreator.com
▼ Or on my website:
3d-printcreator.com
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#OrturMasterLaserEngraver #MarkingStainlessSteel #LaserMarkingSteel
Thanks for watching this video.