▼ Ortur Master 2 METAL engraving with mustard and the NEW Air Assist 3d-PrintCreator 2020-12-13 | Best Laser Engraver Upgrades: 3d-printcreator.com/best-laser-engraver-upgradesBuy me a jar of mustard: http://support.3d-printcreator.comWant to do it yourself? Ortur Master II (all types) http://gbe.st/302mPvPIn this video, I show you how I use my Ortur Master 2 for Metal Engraving with the help of some mustard and I also show you the new Air Assist I made that is now compatible with all Ortur Master 2 Laser Engravers.How nice would it be if the Ortur Master 2 machine could engrave at least twice as fast? And how nice would it be if this could also be done in stainless steel, such as IKEA scissors?Using SHX fonts, it is possible to write text while staying in the line mode of the laser. This makes the laser work a lot faster, but you can also use real power when engraving, which is what you need to engrave metal.By using mustard on stainless steel, you can use the laser to use the acid in the mustard to etch the metal where the laser makes the acid hot. Unfortunately, this method does not work on all metals, but it works great on stainless steel.When I made my previous Air Assist unit, I did not know that there are small differences between the various Ortur Master 2 laser engraving machines. Because of this it happened that my previous air assist was compatible with my machine, but did not work well with some other Ortur Master laser machines. For that reason I have searched for a solution that works for ALL Ortur Master 2 machines, regardless of which laser diode you use, or which version of the machine you have in your possession.▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#mustardmetalengraving #laserengravingmetal #laserengravingmetalmustardThanks for watching this video.
▼ Rebuilding the studio, Have a break, drink Latte Macchiato 3d-PrintCreator 2023-03-03 | Hi all,At this moment my wife and I are rebuilding the studio, and this renovation will be a big one. The studio will become 8 times as big as it was. There will be 7 camera positions and everything will be optimised for live streaming as well. There will be a packshot studio for photography and a setup for making shorts. A lot of 3D printers and Laser Engravers will have their own place in the studio, and there will be a place for resin printing as well. Also, an Electronics workplace will be made so that designs incorporating electronics will be possible as well. I hope I will see you soon, in about 4 weeks from now. The studio will be finished by then and I will restart making regular videos then.Love you all, speak to you soon.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3DPrintCreator #studio #renovationThanks for watching this video.
▼ Creality Laser Falcon 2 announcement 3d-PrintCreator 2023-02-13 | Available for pre-sale now at: store.creality.com/products/falcon2-22w-laser-engraver-cutterAttention all makers, DIY enthusiasts, and laser cutting pros! Get ready to revolutionize your work with the latest technological breakthrough in laser cutting - the Laser Falcon 2 from Creality! This new diode laser machine is not just an ordinary laser cutter but a game changer that will take your projects to the next level.The Laser Falcon 2 is the first-ever 22 Watt diode laser machine, setting a new standard for power and precision in the industry. This means you can cut and engrave faster and more efficiently than ever before, enabling you to tackle even the most challenging projects with ease.But that's not all! Creality understands the importance of safety when working with lasers, which is why the Laser Falcon 2 is packed with a suite of safety features that will give you peace of mind while you work. With its monitoring system, you'll always be in control of your laser cutter, ensuring that it's operating at its best and most effective level.The Laser Falcon 2 is not just a machine, it's a tool that empowers you to create your wildest visions with ease and precision. Whether you're an experienced laser cutting professional or just starting out, the Laser Falcon 2 is designed to make your life easier, so you can focus on the creative process and bring your ideas to life.Stay tuned to this channel for more detailed information and a review of the Laser Falcon 2 when the machine is available.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#laserfalcon2 #crealitylaser #crlaserfalconThanks for watching this video.
▼ Customize your production like a pro with LightBurn and a laser engraver 3d-PrintCreator 2022-12-24 | TwoTrees TS2 Laser with AUTOFOCUS and 10 Watt laser module - https://s.zbanx.com/r/ccTnxVeyTfur--- Look for coupons on their homepage ---Whenever you have to customize your production with lightburn and a laser engraver, you will have to create a backboard and multiple objects that you can change easily. In this tutorial you will see how to easily customize your production like a pro with LightBurn and a laser engraver.This FREE lightburn customized engraving tutorial is my Christmas gift to my followers who have been loyal to my channel and subscribed throughout the years. From the bottom of my heart, Thank You.00:00 Introduction00:15 Designing the backboard03:01 Making a group object05:00 Locking the backboard to prevent from changing things06:04 The actual engraving of the backboard06:34 Creating the artwork design11:07 Preparing artwork for duplicates12:33 Customizing the names on every coaster15:43 Preparing the laser, placing the coasters on the backboard16:16 Laser engraving the coasters (STRONG LIGHT WARNING)18:16 Showing the engraved coasters▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Lightburn #LightburnTutorials #3dprintcreatorThanks for watching this video.
▼ Why I am not upgrading to Simplify3D V5 3d-PrintCreator 2022-12-19 | Please, after watching this video, use the like or dislike button to give your opinion about Simplify3D and if you feel confident enough to buy their slicer, or if you are going to use one of the other slicers.Also, please comment on this video, telling me what you like or dislike about Simplify3D, Cura, and Prusaslicer (or any other slicer you might use).
▼ Mastering the Zoom and Magnify Tools in Lightburn software 3d-PrintCreator 2022-12-17 | If you don't have a laser engraver yet, this is my current selection of the best laser engravers / laser cutters:Twotrees TS2 10 Watt - https://s.zbanx.com/r/IGC8xLLeE7lC----- 20Watt laser module for Twotrees TS2 - https://s.zbanx.com/r/L0AxCacXkOxBLonger RAY5 10 Watt - https://s.zbanx.com/r/S7yA0YHKZAPlOrtur Laser Master 3 10 Watt - https://s.zbanx.com/r/DJtjRBZ8Eto2Ortur Laser Master 2 (cheaper) - https://s.zbanx.com/r/IQYZJlOPWxztAufero Laser 2 (Cheapest) - https://s.zbanx.com/r/Ae1ScAaoJoqQThe Zoom tool in Lightburn allows you to zoom in or out on the design area, making it easier to see small details or get an overview of the entire design. The Magnify tool is similar to the Zoom tool, but instead of creating a zoom box, it simply magnifies the area around the cursor. This can be useful for making precise adjustments to your design. Both the Zoom and Magnify tools can be accessed from the View menu in Lightburn.You can download the Lightburn software here: lightburnsoftware.comThere is a free trial available and you can also buy the license here.On my website you can find all reviews and much more, easily categorized: 3d-printcreator.com▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#lightburn #3d-printcreatorThanks for watching this video.00:00 Introduction00:42 Lightburn - Workable area and shown size02:21 Lightburn - Zooming with the mouse wheel03:05 Lightburn - Zoom tools in the toolbar04:39 Lightburn - Zoom to Frame05:08 Lightburn - Automatic Smart selection Zooming08:02 Please Like and Subscribe08:21 What if you don't have a laser engraver yet?
▼ TwoTrees TR2 PRO Rotary roller 3d-PrintCreator 2022-12-12 | The product shown is the TwoTrees TR2 Pro Rotary RollerAffiliate link: gozbx.com/r/pxgpjHgt00wz Thanks for using this link, it helps the channelOr... Win a TwoTrees Product here: gleam.io/5nIgC/christmas-wish-listThe TwoTrees TR2 Rotary Roller is not only a roller for engraving round objects, like mugs or flasks, but it has all the tools for you to also engrave on rings, balls, long objects like pipes or bottles, objects that are not round, and not useable on normal rotary rollers, etc. This Rotary Roller is by far the most versatile tool I have ever seen for my laser engraver, and you can use it not only on TwoTrees lasers, but also on any other laser engraver that uses a stepper motor for the Y axis (as far as I know, all of them). The needed cables for the different types and brands of lasers are included in the box.- The TwoTrees Y axis Rotary Roller, for ANY laser engraver: gozbx.com/r/pxgpjHgt00wz- The TS2 Laser engraver I used: https://s.zbanx.com/r/FkciObY0ffnP- Air Assist unit for ANY TwoTrees Laser (and many other brands) https://s.zbanx.com/r/gsmzZCGIodjL▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Visit my website:3d-printcreator.com
▼ TwoTrees TR2 Pro Rotary Roller 3d-PrintCreator 2022-12-11 | The product shown is the TwoTrees TR2 Pro Rotary RollerAffiliate link: gozbx.com/r/pxgpjHgt00wz Thanks for using this link, it helps the channelOr... Win a TwoTrees Product here: gleam.io/5nIgC/christmas-wish-listThe TwoTrees TR2 Rotary Roller is not only a roller for engraving round objects, like mugs or flasks, but it has all the tools for you to also engrave on rings, balls, long objects like pipes or bottles, objects that are not round, and not useable on normal rotary rollers, etc. This Rotary Roller is by far the most versatile tool I have ever seen for my laser engraver, and you can use it not only on TwoTrees lasers, but also on any other laser engraver that uses a stepper motor for the Y axis (as far as I know, all of them). The needed cables for the different types and brands of lasers are included in the box.- The TwoTrees Y axis Rotary Roller, for ANY laser engraver: gozbx.com/r/pxgpjHgt00wz- The TS2 Laser engraver I used: https://s.zbanx.com/r/FkciObY0ffnP- Air Assist unit for ANY TwoTrees Laser (and many other brands) https://s.zbanx.com/r/gsmzZCGIodjL00:00 Introduction00:16 TR2 PRO a very special rotary roller00:34 Chuck for engraving balls and much more00:51 Engrave jewelry, like rings01:08 Replacable claws in the Chuck are included02:23 Support stand for longer objects02:54 TR2 PRO useable on ANY laser engraver03:53 Outro - Please subscribe and like▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#rotaryroller #TwoTrees #3d-printcreatorThanks for watching this video.
▼ Ortur Lasermaster 3 Pro Review: An Affordable and Powerful Laser Engraver 3d-PrintCreator 2022-09-26 | Buy the Laser Master 3 directly at Ortur.net: gozbx.com/r/0EYEY6RqwNnMOr buy it via Buy Best Gear.com gozbx.com/r/JuFuqIsaJdxQOr buy it at Made The Best gozbx.com/r/eJ8bD9jD1FEmIn this video, I will review the Ortur Laser Master 3 and tell you all the good and bad things about this machine.The Ortur Lasermaster 3 is a high-speed diode laser engraving machine that is capable of etching and cutting a variety of materials, including wood, leather, plastic, and more. It is designed for use in a variety of applications, including hobbyist projects, small business production, and professional prototyping. With its advanced laser technology and high engraving speed, the Ortur Lasermaster 3 is able to produce precise and detailed engravings quickly and efficiently. In addition to its engraving capabilities, the Lasermaster 3 Pro is also capable of cutting through materials up to 3mm thick, making it a versatile tool for a wide range of applications.▼ Are you interested in exploring the world of 3D printing and laser engraving and cutting? Look no further! Our website, 3d-printcreator.com, is the perfect destination for all your 3D printing needs. From tips and tricks to product reviews and tutorials, we have everything you need to get started with this exciting technology. So why wait? Visit us today and start creating!00:00 Introduction00:15 Overview of the Ortur Laser Master 300:50 Ortur Laser Master 3 safety features01:18 The Ortur Laser Master 3 frame01:38 Fatest laser engraving at this time02:11 Laser Z height adjustment02:32 Some examples made with the Ortur Laser Master 306:04 Working with WiFi and/or the Ortur Laser App06:54 WiFi not compatible with LIGHTBURN08:19 WiFi is compatible with LaserGRBL08:35 Workaround for Lightburn users09:15 What I don't like about the Ortur Laser Master 310:34 Outro and saying Bye Bye
▼ TwoTrees TS2 Laser Engraver Review 3d-PrintCreator 2022-07-05 | Buy the TwoTrees TS-2 here on TwoTrees3dOfficial: gozbx.com/r/FkciObY0ffnPCoupon code: GCW6CSGN9XE9 (Buy one get three)Coupon code: TS2 (With $30 off)Or here on Banggood: gozbx.com/r/He85ydXQLxUzCoupon code: BG64e22d (Get $30 off)The TwoTrees laser engraving machine and cutter is definitely one of the most complete laser cutting machines you can buy right now that uses a 10 Watt diode laser. The machine can be operated perfectly with the free LaserGRBL software, but you can also work perfectly with Lightburn with this machine, and TwoTrees has its own app for Android and Apple users with which you can use the machine over WiFi.You no longer have to do the adjustment of the machine by hand, because the TS-2 uses a very well-functioning autofocus over the Z axis of the machine, and this autofocus measures with a probe where the material is located. You just have to indicate whether you want to engrave or cut, and if you want to cut, you have to tell us how thick the material is that you want to cut. The TS-2 then sets itself to the correct depth, making the most perfect cuts I've ever seen from a laser cutting machine with a diode laser.As an example, I have never managed to make a nice cut from 6mm thick MDF board, but with this machine it was no problem at all. Acrylic and stainless steel are also no challenge for this machine, you can simply work with these materials.TwoTrees gave me this machine as a gift for a review, but they were unable to influence the review in any way. Everything I say and show in this review is my own opinion and came about through my own testing.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ 3D Printing to Stay Safe and Avoid Speeding Tickets: How to Monitor Your Speed. 3d-PrintCreator 2022-04-17 | If you want to print this bracket yourself, buy yourself the Longer Orange Mono 4K printer here: gozbx.com/r/HNx6INFqIvS2Then contact me. I will send you the file you need to print.If you watched this video to see how I used 3D printing to avoid speeding tickets, then you are on the correct channel.I bought myself a device to warn against speed traps that the police in the Netherlands used, but the bracket was designed really stupidly. That's why I created a new bracket to hold the hardware in place against the window of my car where I can easily reach it.The Used printer is the Longer Orange 4K mono Resin 3D printer and the software used to design the bracket is Fusion 360.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Speedtrap #DutchPolice #3DPrintCreatorThanks for watching this video.00:00 Introduction to Dutch Law on radar detectors00:32 It is allowed to let people know where radar detectors are00:45 Software to notify you of speed traps01:21 Flitsmeister Two, a hardware device for your Fllitsmeister software02:00 Original Flitsmeister Two bracket is horrible02:30 I had to design my own Flitsmeister Two bracket03:06 Outro and images of me using my new bracket
▼ Longer Orange 4K MONO Resin 3D Printer 3d-PrintCreator 2022-04-08 | 𝗕𝗨𝗬 𝗧𝗛𝗘 𝗣𝗥𝗜𝗡𝗧𝗘𝗥 𝗛𝗘𝗥𝗘: gozbx.com/r/HNx6INFqIvS2This video is about the Longer Orange 4K Mono Resin 3D Printer that I received from Longer for a review.The Longer Orange 4K Mono is a resin 3D printer that is MUCH DIFFERENT from any other Resin 3D Printer in its price range. The printer does work with a lot of slicers and comes with both Chitubox and Longerware, but it's also compatible with Lychee Slicer. It is not dependent on the Chitubox software, as many other resin printers are, and it doesn't require you to take a yearly subscription to Chitubox software. Yet, this printer has the highest resolution LCD screen ever seen in a resin printer that prints in this size, at this price point.Due to the fact that it's a Mono LCD printer, the Longer Orange 4K Mono is about 4 times faster in curing resin than other comparable printers, such as my Elegoo Mars. Also, this printer has the possibility to alter files after you are done slicing. If you made a mistake while slicing, you can easily correct that mistake from the printer touchscreen and save the file, so the changes won't get lost if you want to print the file again.At this moment, I think this is the best low-cost resin LCD printer you can buy, and this printer will for sure cost you less than if you buy for example an Elegoo resin printer, as that works only with Chitubox software.𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥: This printer was given to me by Longer for a review and the Longer company had no problem with my review guidelines, which I have published on my website: 3d-printcreator.com/review-guidelinesI have not, and will not get paid for this review. Everything I say is my own opinion about this Longer Orange 4K Mono printer.▼ 𝗕𝗨𝗬 𝗠𝗘 𝗔 𝗗𝗥𝗜𝗡𝗞http://support.3d-printcreator.com▼ 𝗦𝗨𝗕𝗦𝗖𝗥𝗜𝗕𝗘 𝗧𝗢 𝗠𝗬 𝗬𝗢𝗨𝗧𝗨𝗕𝗘 𝗖𝗛𝗔𝗡𝗡𝗘𝗟http://subscribe.3d-printcreator.com▼ 𝗙𝗜𝗡𝗗 𝗠𝗘 𝗢𝗡 𝗧𝗛𝗜𝗡𝗚𝗜𝗩𝗘𝗥𝗦𝗘http://thingiverse.3d-printcreator.com▼ 𝗙𝗢𝗟𝗟𝗢𝗪 𝗠𝗘 𝗢𝗡 𝗧𝗪𝗜𝗧𝗧𝗘𝗥http://twitter.3d-printcreator.com▼ 𝗩𝗜𝗦𝗜𝗧 𝗠𝗬 𝗪𝗘𝗕𝗦𝗜𝗧𝗘3d-printcreator.com𝗖𝗛𝗔𝗣𝗧𝗘𝗥𝗦:00:00. Intro00:36. Specifications01:12. The Monochromatic screen - Fast Curing01:51. The Printer Menu - Altering Settings02:20. 1.5x 4K resolution for a smoother surface03:00. Slicing with Chitubox - But don't buy it03:59. Slicing with Longerware, Lychee, or even Pruse slicer04:40. Overall thoughts05:06. OutroHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#LongerOrange4kMono #3DPrintCreator #BestResinPrinter𝗧𝗛𝗔𝗡𝗞𝗦 𝗙𝗢𝗥 𝗪𝗔𝗧𝗖𝗛𝗜𝗡𝗚 𝗧𝗛𝗜𝗦 𝗩𝗜𝗗𝗘𝗢 𝗔𝗡𝗗 𝗥𝗘𝗔𝗗𝗜𝗡𝗚 𝗧𝗛𝗘 𝗩𝗜𝗗𝗘𝗢 𝗗𝗘𝗦𝗖𝗥𝗜𝗣𝗧𝗜𝗢𝗡
▼ APRIL FOOLS Joke 3d-PrintCreator 2022-03-31 | BUY THE ALFAWISE AT KICKSTARTER: bit.ly/3qOu8BSAlfawise just sent me their newest 10.2 Watt OPTICAL POWER Mini laser engraver that will be coming out on Kickstarter very soon, for a review.And what a machine this is. I was able to make a nice APRIL FOOLS video with it, but still the Alfawise C50 is a very nice, very low power laser.If you got all the way here reading this story, please subscribe to my channel, there will be more fun in watching my other videos.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#APRILFOOLS #1APRIL #APRIL1Thanks for watching this video.
▼ Longer LK5 Pro half a year later 3d-PrintCreator 2022-03-21 | 𝗕𝗨𝗬 𝗧𝗛𝗘 𝗣𝗥𝗜𝗡𝗧𝗘𝗥 𝗛𝗘𝗥𝗘: https://s.zbanx.com/r/GGUJb4hhk64zThis video is about the Longer LK5 Pro 3D printer and tells you my thoughts after half a year of usage of this printer.The Longer LK5 Pro printer is a large printer, which is also intended for making large objects. The 3D printer arrived six months ago and is used daily by me for making prototypes and mockups. In addition to this printer, I also use two other large printers, from Creality and Artillery, but I like the Longer LK5 Pro the best because it produces perfect prints with the least effort.The Longer LK5 Pro has a bed for objects of 300x300 millimeters in size and can print 400 millimeters high. The frame must therefore be very sturdy and robust, and the triangular construction of this printer means that it is. In addition, the printer is equipped with an easy interface and an easy-to-read 4.3 inch large touchscreen.𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥: This printer was given to me by Longer for a review, but that was more than six months ago, and that review was made by agreement. This second video was made by me because I really like this printer, and think it's one of the best large format 3D printers you can buy for under $300.▼ 𝗕𝗨𝗬 𝗠𝗘 𝗔 𝗗𝗥𝗜𝗡𝗞http://support.3d-printcreator.com▼ 𝗦𝗨𝗕𝗦𝗖𝗥𝗜𝗕𝗘 𝗧𝗢 𝗠𝗬 𝗬𝗢𝗨𝗧𝗨𝗕𝗘 𝗖𝗛𝗔𝗡𝗡𝗘𝗟http://subscribe.3d-printcreator.com▼ 𝗙𝗜𝗡𝗗 𝗠𝗘 𝗢𝗡 𝗧𝗛𝗜𝗡𝗚𝗜𝗩𝗘𝗥𝗦𝗘http://thingiverse.3d-printcreator.com▼ 𝗙𝗢𝗟𝗟𝗢𝗪 𝗠𝗘 𝗢𝗡 𝗧𝗪𝗜𝗧𝗧𝗘𝗥http://twitter.3d-printcreator.com▼ 𝗩𝗜𝗦𝗜𝗧 𝗠𝗬 𝗪𝗘𝗕𝗦𝗜𝗧𝗘3d-printcreator.com𝗖𝗛𝗔𝗣𝗧𝗘𝗥𝗦:00:00. Intro00:20. Printer Dimensions00:37. Problems big printers have01:17. Longer's answer to making a sturdy frame01:43. What more can you expect from this printer?02:25. Well designed printer03:52. Best 3D Printer under $300,0004:21. DISCLAIMER05:22. OutroHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#LongerLK5Pro #3DPrintCreator #BestBig3DPrinter𝗧𝗛𝗔𝗡𝗞𝗦 𝗙𝗢𝗥 𝗪𝗔𝗧𝗖𝗛𝗜𝗡𝗚 𝗧𝗛𝗜𝗦 𝗩𝗜𝗗𝗘𝗢 𝗔𝗡𝗗 𝗥𝗘𝗔𝗗𝗜𝗡𝗚 𝗧𝗛𝗘 𝗩𝗜𝗗𝗘𝗢 𝗗𝗘𝗦𝗖𝗥𝗜𝗣𝗧𝗜𝗢𝗡
▼ Atomstack P7 extreme power 3d-PrintCreator 2022-03-14 | 🛒 𝗕𝗨𝗬 𝗔𝗧𝗢𝗠𝗦𝗧𝗔𝗖𝗞 𝗣𝟳: bit.ly/3HMUaei Note: When using the links, YouTube will ask you if you are sure to leave YouTube. Click the small text link to get transferred to the Atomstack official website.In this Atomstack P7 Laser Engraver Review, I will show you the reason why I think this is currently the best 5 Watt laser engraving machine you can possibly buy, and also for sure the most powerful laser engraver I have tested so far on my channel.The Atomstack P7 is a single arm laser engraver, made out of Aluminum and sheet metal that is extremely sturdy, with a work area of 200 times 200 millimeters. The machine is controlled by GRBL commands, so it can be used with LaserGRBL and Lighhtburn without any problems.The laser itself is a diode type laser with a compressed spot due to lenses that focus the light coming from the laser module. The spot size, or kerf, is 0.02mm on both the X and Y axis, and that makes this the diode laser with the smallest kerf I have ever tested. This also means that all the energy provided by the 5.5 Watt laser source is transferred to a spot of only 0.02x0.02mm making it the narrowest and most powerful laser beam I have ever seen on a diode laser. The Atomstack P7 is easy to assemble and the box includes all the tools needed, including some special plastic parts that help you level the arm of the laser without any problems. 𝗖𝗛𝗔𝗣𝗧𝗘𝗥𝗦:00:00. Intro00:35. Overview of the machine01:05. Assembling the machine01:39. Setting up the Atomstack P7 in software02:02. The special - The KERF of the laser03:15. Live samples of cutting with the Atomstack P704:16. Cutting Acrylic in one pass05:19. More details about the frame05:35. Safety features of the Atomstack P707:04. Would I recommend this laser?07:50. Overview08:45. OutroThe Atomstack P7 laser Engraver is provided to me for free by Atomstack, for a review on this channel.Atomstack did not pay for the review, and I had all the rights to include any good or bad thing I would find in this video. Everything I say in this video is my own interpretation of the quality of this laser engraver.This type of reviews is only possible due to the support of my viewers who sometimes do a donation via paypal or who buy their equipment via my affiliate links. Thank you so much for doing that.▼ 𝗕𝘂𝘆 𝗺𝗲 𝗮 𝗱𝗿𝗶𝗻𝗸 ❤️❤️❤️http://support.3d-printcreator.com▼ 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲http://subscribe.3d-printcreator.com▼ 𝗧𝗵𝗶𝗻𝗴𝗶𝘃𝗲𝗿𝘀𝗲 𝗹𝗶𝗻𝗸http://thingiverse.3d-printcreator.com▼ 𝗙𝗼𝗹𝗹𝗼𝘄 𝗺𝘆 𝗧𝗪𝗘𝗘𝗧𝗦http://twitter.3d-printcreator.com▼ 𝗢𝗿 𝗴𝗼 𝘁𝗼 𝗺𝘆 𝗪𝗘𝗕𝗦𝗜𝗧𝗘 𝗳𝘂𝗹𝗹 𝗼𝗳 𝗥𝗘𝗩𝗜𝗘𝗪𝗦 𝗮𝗻𝗱 𝗣𝗥𝗢𝗝𝗘𝗖𝗧𝗦3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Atomstack #laserengraver #3dprintcreatorThanks for watching this video.
▼ Creating gifts in Lightburn 3d-PrintCreator 2022-02-13 | Laser Engraver: Ortur Laser Master 2 Pro: gozbx.com/r/HKxJWGejuubMUsed Diode Laser module: Aufero 5.5W LF with Air Assist: gozbx.com/r/Hrq5mYyFZZi8Making 3D objects as a gift or as a functional part for yourself is not only reserved for 3D printers but can also be done with laser cutting machines, such as the Ortur Laser Master 2 Pro, which I use in this video.With the right software, you can easily make the different layers, which you later glue together, so that you get a 3D object. So it's a matter of thinking in layers to create such an object.On my website, you will find many more great videos and ideas for 3D printing and laser engraving. Take a quick look: 3d-printcreator.com▼ If you want to buy me a nice cold drink, please do so:support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Super fast laser engraving 3d-PrintCreator 2022-01-13 | Aufero Laser 2: https://s.zbanx.com/r/K4UaADmlLmg2Aufero Offline control box: https://s.zbanx.com/r/uGhwZ2rsQFj0Promo Time: January 10, 2022, 8:00 AM, UTC- February 10, 2022, 8:00 AM UTCDiscounts are visible on the Ortur website after clicking the linkGifts: 1st-3rd orders get a Free Y-axis worth $89.994th-6th get a Free Z-axis worth $69.99 everydayAfter I made my review about the Aufero Laser 2, I was contacted and told that the Aufero Laser 2 can run much faster than 5000mm per minute. In fact, it can even run faster than the advertised 10.000mm per minute. In this video I show you the Aufero Laser 2 running at 15.000mm/MIN without any problemThanks to Roland Med for his comment, and Thanks to the great people at Ortur and Vivi at Zbanx, that helped me with this video. ▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Ortur #Aufero #3DPrintCreatorThanks for watching this video.
▼ Swapping Laser Modules between Ortur and Aufero lasers 3d-PrintCreator 2022-01-10 | Aufero Laser 2: https://s.zbanx.com/r/K4UaADmlLmg2Aufero 5.5Watt Long Focus laser with air-assist nozzle: https://s.zbanx.com/r/g8xYjQP8AoncOrtur Laser Master 2 Pro: https://s.zbanx.com/r/0EW5uxnpIDPbIf you have an Ortur or Aufero 24Volt Laser engraver and you want to change the lasers, then it's possible that you can't just do it, because the lasers won't fit on your machine. So, If you want to be swapping laser modules between Ortur and Aufero lasers, then it's a good idea to watch this video, and see how to do this. It's easy.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Ortur #Aufero #3DprintcreatorThanks for watching this video.
▼ Aufero Laser 2 REVIEW 3d-PrintCreator 2022-01-10 | Aufero Laser 2: https://s.zbanx.com/r/K4UaADmlLmg2Aufero Offline control box: https://s.zbanx.com/r/uGhwZ2rsQFj0Promo Time: January 10, 2022, 8:00 AM, UTC- February 10, 2022, 8:00 AM UTCDiscounts are visible on the Ortur website after clicking the linkGifts: 1st-3rd orders get a Free Y-axis worth $89.994th-6th get a Free Z-axis worth $69.99 everydayFull disclaimer, I received this laser for a review and I am allowed to keep the machine for comparison with other machines. Ortur did not pay me for this review, and everything I say is my own opinion.On January 12, 2022, Ortur will launch its new Aufero Laser 2, a laser engraving machine with a large work surface and a choice of 3 different laser modules, tailored to the wishes of the user. There will be a model for people who like to make engravings, such as photos in wood or leather, a version for people who like to cut things out of wood, cardboard or acrylic, and a version that is somewhere in between. I looked at that version, the 5.5Watt Short Throw laser, in this review.The first thing you notice when you buy the laser is that it is very well packaged and that the machine can really be put together in a few minutes. You do not need any special knowledge about assembling CNC machines to assemble this engraving machine. Once the Aufero Laser 2 is assembled, you can connect it to your computer and start your software. I myself use Lightburn, which is paid software, but you can also work with LaserGRBL, which is a free variant.Once started, it is clear that this laser engraving machine delivers excellent results. Whether engraving wood, cutting wood or engraving leather, the laser has no problem with it and just does what it's supposed to do.The used Diode laser modules are of the same type as the 24 volt modules used in the Aufero Laser 1, and the Ortur Laser Master II machines, and are therefore perfectly interchangeable. The Aufero Laser 2 may not be as fast at 5000mm per minute as the Ortur Laser Master 2 Pro, but when it comes to quality, this machine is not inferior to its much more expensive brother. When it comes to the pure price versus quality ratio, the Aufero Laser 2 easily beats its big brother.Do you want to know more about the Aufero Lasers, or are you interested in 3D printing, stay on this channel, because there are many more fun videos coming your way.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Aufero #Ortur #3dPrintCreatorThanks for watching this video.
▼ Elegoo Mercury Plus first use and review 3d-PrintCreator 2021-12-10 | Buy the Elegoo Mercury Plus here: banggood.com/ELEGOO-MercuryPlus-2-in-1-Washing-and-Curing-Machine-for-LCD-or-DLP-or-SLA-3D-Printed-Models-with-360-degree-Rotating-Turntable-p-1823862.html?cur_warehouse=CN&rmmds=search&ID=47184&p=TD04047688450201612E&custlinkid=1719298Don't have a resin printer yet? banggood.com/ELEGOO-Mars-2-Pro-Mono-MSLA-3D-Printer-UV-Photocuring-LCD-Resin-3D-Printer-with-6_08inch-2K-Monochrome-LCD-Printing-Size-129x80x160mm-p-1743602.html?cur_warehouse=CN&ID=471846303594&rmmds=search&p=TD04047688450201612E&custlinkid=1719299Banggood reached out to me and asked me if there was anything on their platform that I would like to review? In the conversation we had, we came to the conclusion that the Elegoo Mercury Plus, a Washing and Curing station for resin prints, would be really beneficial for me, as I am really using Resin printers.Now, the people from Banggood never asked me for any influence in the review and they never offered to pay me for the review. This video and everything I say, are completely my thoughts about the Mercury Plus.The printer I am using is the Elegoo Mars, the first model.The Resin is the original Elegoo ABS-like PhotopolymerAnd, of course, the curing station is the Elegoo Mercury Plus▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Elegoo #Mercuryplus #resin3DprintingThanks for watching this video.
▼ Longer RAY5 Hobby laser | questions answered 3d-PrintCreator 2021-11-30 | Buy the Longer Ray5 at the official Longer website: gozbx.com/r/xDh2u9nhraHQCoupon Code: GFPWT7J70F0N Takes $50,-- offIn this video, I answer questions from viewers about the longer RAY5 laser engraver that I received from Longer for a review.The question that a number of people asked me via social media was whether this laser is capable of cutting wood or cardboard, and whether or not the 12-volt power supply does not supply enough power to be a really powerful machine.In this video, I, therefore, show that I can cut wood with ease with the Longer RAY5 laser and that it does not matter that this laser has a 12-volt power supply, even though other brands have a 24-volt power supply. I show how the actual amount of light, and the size of the dot, really determine how powerful a laser is.If you want to see more videos like this, subscribe to my channel so you can see all the content I create. This can be about laser engraving, 3D printing, or other things that have to do with 3D-related machines.Thanks for watching.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#LongerRay5 #Longer #Ray5Thanks for watching this video.
▼ Longer Ray5 Laser engraver Review 3d-PrintCreator 2021-11-28 | Buy the Longer Ray5 at the official Longer website: gozbx.com/r/xDh2u9nhraHQCoupon Code: GFPWT7J70F0N Takes $50,-- offFrom Longer 3D I received a Longer Ray5 Laser engraver to make a review about it. I received this machine for free, and without shipping costs, but I was not paid or directed in any way to influence the review.00:00. Start | Introduction00:20. Specifications00:55. Standard controller02:22. Operation02:55. First tests03:24. What I don't like05:07. EndingThe Longer Ray5 is the first Laser engraver I received that comes with a controller as standard. This controller makes it unnecessary to connect a computer to the laser, which means that using the machine becomes a lot easier and in some cases, also a lot cheaper.The powerful 5.5 Watt laser (optical power) is capable of engraving in a beautiful way, even when it comes to photo-realistic images. This laser can also easily be cut in wood and acrylic, provided that the latter concerns dark blue or black material. The machine is equipped with a number of safety options, but of course it is important that you continue to think for yourself and that you are always careful with your laser engraver.The advantages of the Longer Ray 5 are:- Built-in controller with SD cards and WiFi- Standard equipped with a 5.5 Watt laser module- Perfect Square shaped 0.08x0.08mm dot, no KERF effect- Suitable for engraving and cutting- Easy operation- Economically priced, compared to comparable machinesThe links to this video are affiliate links. If you decide to purchase the Longer Ray5 through one of the links provided by me, I will receive a small fee from Longer3D for making this video.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Longer3D #LongerRay5 #LongerLaserEngraverThanks for watching this video.
▼ Choose the right module for the Ortur Aufero Laser 1 3d-PrintCreator 2021-10-31 | Watch me do a full review on this laser here: youtu.be/Q30Ntf6SQIkBuy the Ortur Aufero Laser 1 here: gozbx.com/r/WgN6aL2SGqHgCoupon Code"AUFEROTOP1( with $5 off for all products at ortur.net except OLM-2 Pro)"Activity"A total of 150 YRR 2.0Free one YRR for the first 5 orders every dayAnnounce the winner list on the shop homepage the next day"Or buy it's professional big brother, the OLM2 PRO: gozbx.com/r/dN6sAYk0z4HZIn this video, I show you how to choose the right laser module when you buy an Ortur Aufero Laser 1.There are 3 different modules to choose from, such as the 1.6 Watt module for engraving wood and cardboard, the 5.5 Watt module for engraving stainless steel, stone, and other hard materials, and the 5.5 Watt version for cutting wood in different thicknesses. This last module is also equipped with an Air Assist nozzle for people who have a compressor and can connect it to their laser machine.For the owners of an Ortur Laser Master 2 PRO laser engraving machine, the lasers used on the Aufero Laser 1 are 1 on 1 compatible with the Laser Master 2 PRO laser.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Ortur Aufero Laser 1 | The all in one review 3d-PrintCreator 2021-10-31 | This is the Ortur Aufero 1, all in one review.Buy the Ortur Aufero Laser 1 here: gozbx.com/r/WgN6aL2SGqHgCoupon Code"AUFEROTOP1( with $5 off for all products at ortur.net except OLM-2 Pro)"Activity"A total of 150 YRR 2.0Free one YRR for the first 5 orders every dayAnnounce the winner list on the shop homepage the next day"Or buy it's professional big brother, the OLM2 PRO: gozbx.com/r/dN6sAYk0z4HZChapters:00:00. Start | Introduction00:26. Overview of the machine02:04. Overview of the laser heads available04:11. Using a grid to align objects06:52. Focusing the laser08:17. Engraving in wood08:59. Engraving on anodized aluminum12:46. Engraving result multiline fonts in aluminum13:30. Engraving stone, a slate dinner plate16:06. Video outro with a jokeIn this video I am showing you all details about the Aufero laser and how to use it for engraving on wood, anodized aluminum and even a slate dinner plate.When you buy the laser, you can choose 1 of 3 configurations, being a 1.6 Watt engraving laser, or one of the 5.5 Watt engraving and cutting laser diode modules. In another video, I explain how to choose between the available options, Watch it here: youtu.be/WvQF5urCi1U▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Laser Engraving Tips - Using a Sandbox 3d-PrintCreator 2021-10-12 | If you want to engrave objects with a laser engraver and those objects are not completely flat on the bottom, you may have problems leveling your laser with respect to your object because it cannot lie flat on the table below your laser.A handy way to easily level your object with respect to your laser is to push the object into sand, rice or cat litter so that the unevenness of the object is negated.You can easily make a sandbox yourself, or you can use a baking tin for the oven that you fill with sand or another material of your choice.P.S.: Share this tip with others. thanks...▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Cutting Fabrics with a Laser Cutter / Engraver | Two Trees Totem S 3d-PrintCreator 2021-09-01 | Buy your laser engraver here: twotrees3dofficial.com/collections/engraver/products/two-trees-totems-laser-engraving-machine-lks-motherboard-40wIn this video we are going to cut different types of fabrics with a laser cutter to see how this is done. This way of cutting can be the dream of anyone who converts patterns into sewing, or who works with products that need to be covered with fabric.The laser I use in this video is a Two Trees Totem S laser, but you can use any other Diode laser for this, such as the Ortur and NeJe machines. If you don't have a laser cutter yet, check out the various reviews on my channel.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Lasercutter #LaserEngraver #LasermachineThanks for watching this video.
▼ Two Trees Totem S Review AND marking a STEEL LETHERMAN knife 3d-PrintCreator 2021-08-27 | Buy your laser engraver here: twotrees3dofficial.com/collections/engraver/products/two-trees-totems-laser-engraving-machine-lks-motherboard-40wIn this review I test the Two Trees, Totem S laser engraving machine. This laser engraving machine has a laser that has a real power of 5.23 WATT and this is combined with a lens that focuses the light to just 0.08mm. Together, this ensures that this laser has extreme power to cut or engrave objects. It is even possible to engrave the hardened steel of a Letherman multitool in super high detail, with this laser machine. I didn't even have to use a tool like mustard, the machine can engrave directly on silver colored hardened steel.The machine comes as a kit and can be assembled in about an hour by people who can also assemble an IKEA cabinet. I'm using paid software from Lightburn in this review, because I'm licensed and can handle it well, but the laser works with any software that can send GRBL commands.The laser is available from several vendors, but I prefer the original Two Trees website, and the link used is an affiliate link, which helps recoup my cost of making this video a little bit.Thanks for watching, and see you in the next video.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#TwoTrees #laserengraver #cheaplaserThanks for watching this video.
Marking a Leatherman Surge with a low cost Diode Laser 3d-PrintCreator 2021-08-26 | In this video I show how I engrave a QR code on a hardened steel Letherman Surge with just a low cost laser engraver.In a later video I will show the complete laser machine, and the settings to do this yourself.#Shorts #Laserengraving #3dprintcreator
▼ Longer LK5 Pro 3D printer UNBOXING and first REVIEW 3d-PrintCreator 2021-08-04 | Buy the Longer LK5 Pro here: https://s.zbanx.com/r/eV0RHwDxSfK8Best 3D Printer Upgrades: 3d-printcreator.com/best-3d-printer-upgradesI received the LK5 Pro 3D printer from Longer for a review. This printer is a competitor to the Ender 3 Pro in terms of pricing and a competitor to the Artillery Sidewinder X in terms of size on which you can print. The printer is sturdy and has extra rods to anchor the upper gantry. The printer has only 1 Z axis motor, which is striking when you consider how much effort has gone into making the printer so sturdy. The filament is brought to the head on the Bowden style, so the extruder is on the side of the frame, while the filament is brought to the head through a tube.The interface of the printer is very clear, and very easy to operate, and the touch screen makes it easy to do all the input on the printer. Files are transferred to the printer via a micro SD card, and a Micro SD to USB converter is included.Full disclaimer:This printer has been provided to me for review at no charge and does not need to be returned to the factory. Longer in no way stipulated how I should do the review, nor did he specifically ask for things to be mentioned. The review is based entirely on my own findings and opinion about the printer, and no payment has been made for this review in any way. The links I use in this review are affiliate links, which I earn from when you use them. You can do this not only to buy the printer but also to support my channel. Nevertheless, I always advise everyone to see where a product is offered for the best price and with a good, fair warranty.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Thanks for watching this video.
▼ Ortur Laser Master 2 Pro | High-End Laser engraver 3d-PrintCreator 2021-06-25 | Buy the Ortur LM2 PRO directly from Ortur: https://s.zbanx.com/r/rhv3sCVLqlGD(official Ortur website via referral link - Helps the channel)Coupon: ORTURPRO And, there is a promotion. 5 times a day a buyer receives the Ortur Y axis Rotary Roller for FREE.Imagine it, Design it, Make it, Ortur Laser Master 2 Pro is specialized for manufacturers.The Ortur Laser Master 2 Pro is the newest laser in the Ortur range, and it is also the most professional diode laser engraver the company makes. The machine has 4x more power in cutting objects, can engrave with the best, and works with much more precision than its predecessors.The important innovations of this Ortur LM2 Pro are:PRECISION - The laser projects onto a much smaller dot, allowing for much higher precision, and the motherboard has also been modified to handle this tremendous precisionSPEED - The Ortur Laser Master 2 Pro can move 2.5x faster, allowing the laser to engrave faster, but also be able to transfer power in smaller amounts to the material being engraved.SAFETY - The new laser engraver has far more safety options than any predecessor and from any brand. From an emergency button to flame recognition and a system that detects machine movement.DURABILITY - The Ortur Laser Master 2 Pro is made in such a way that it can easily work 24/7, without any problem arising in the operation of the individual components.In the video, high-speed engraving is done on plywood that has been pre-treated using the Kenny Hack Method. More information about the Kenny Hack can be found on his YouTube channel, The Kenny Hack.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#LaserEngraver #Ortur #OrturLM2PROThanks for watching this video.
making money with the Ortur Master 2 laser engraver #shorts 3d-PrintCreator 2021-03-24 | #shortsAt this moment I am making a video about making money with a cheap Ortur Master 2 laser engraver. The machine is costs just a few hundred bucks and in this particular job, it's paid back completely.
▼ Ender 3 V2 Skipped Steps Problem SOLVED 3d-PrintCreator 2021-02-22 | UPDATED 4.2.7 Motherboard: https://s.click.aliexpress.com/e/_9Jgp6UBest 3D Printer Upgrades: 3d-printcreator.com/best-3d-printer-upgradesUsers with an Ender 3 V2 printer who purchased this printer at the end of 2020, or early 2021, and who are experiencing skipped steps in virtually every print, may experience an issue on the motherboard of the printer, which has wrong stepper drivers.Creality has shipped the Ender 3 V2 with the 4.2.2. motherboard, where the stepper drivers are soldered to the board, so they are not easy to replace. In the beginning, these were original Trinamic TMC 2208 silent stepper drivers (and the board is also available with 4988 stepper drivers), but later Creality started using a clone made in China that is much cheaper, but also much worse. These knock-off stepper drivers cause the problem of skipped steps, and this has nothing to do with incorrectly assembling the printer or not tightening the belts properly.Since the TMC 2208 stepper drivers are soldered to the board and are not easy to replace, the only solution to fix the problem is to replace the motherboard with the 4.2.7 version, which is sold as an upgrade by Creality.At the time of making this video, buyers who bought this printer with the wrong stepper drivers are not yet being compensated for this issue, and these users can only go to their reseller. In my case, the Dutch seller where my printer comes from was kind enough to give me the 4.2.7. motherboard for free to repair the printer, but I read on various forums that this is not the case everywhere in the world.I can confirm that after replacing the 4.2.2 motherboard to the 4.2.7 motherboard, all problems have been resolved.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Ender3v2 #3DPrintCreator #Creality #422motherboardThanks for watching this video.
Happy Cat interferes with 3D printer repair 3d-PrintCreator 2021-02-21 | #shorts #shortToday I should be working on the Ender 3 V2 printer that I have in the studio and that doesn't print a decent print, yet my Cat won't allow me to work on the printer because he wants a photoshoot for himself.Please like and subscribe.
▼ TRONXY XY-2 PRO Review | The Cheapest Ender 3 competitor 3d-PrintCreator 2021-02-14 | Tronxy XY-2 Pro: https://s.click.aliexpress.com/e/_ArnIoqBest 3D Printer Upgrades: 3d-printcreator.com/best-3d-printer-upgradesThis is the TRONXY XY-2 PRO review in which I describe why I think the TRONXY XY-2 PRO 3D printer is a much cheaper, but much better printer than, for example, the Creality Ender 3 V2.For starters, the prints that come from this printer are beautiful. If you do not want to watch the entire video, but only see the results, you can do so at 05:14 in this video, but I promise you that if you watch the entire video, I will mention quite a few things that determine whether or not you want to buy this printer.The TRONXY XY-2 PRO has an automatic bed level function, measuring not only a single point, but a complete mesh of 16 points. The printer is equipped with a filament runout sensor, and this is the first printer I know of, where you can interrupt a print, for example, because you want to go to bed, and resume it the next day. This is more than just continuing to print in the event of a power failure.The software on the printer, and the associated interface, is the most user-friendly I have encountered on cheap printers to date. Only on a printer of over 3000 Euro have I ever seen a similar, pleasant interface. Striking in this interface are the possibilities to change parameters during printing, and the possibility to view a 3D render of the print while selecting the file to print.So, you can deside. Is this printer the cheapest Ender 3 competitor?Timeline:0:00 Introduction0:31 Review Start0:59 Z Axis leadscrew1:20 Large display1:50 Proximity sensor2:22 Extruder and runout sensor3:35 Print bed strain relieve4:04 SD Card slot4:54 Belt assembly5:14 Print results6:29 My verdict7:11 Like and subscribe▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Tronxyxy2pro #Tronxy #3DprintcreatorThanks for watching this video.
▼ Super Cheap TRONXY XY-2 Pro printer First Impression 3d-PrintCreator 2021-02-07 | Tronxy XY-2 Pro: https://s.click.aliexpress.com/e/_ArnIoqBest 3D Printer Upgrades: 3d-printcreator.com/best-3d-printer-upgradesVia AliExpress I bought the TRONXY XY-2 Pro printer for a super low price of only 135 Euro. This printer comes with a few hugely powerful features that make it almost unbelievable that this printer is so cheap. How about an automatic bed level function with mesh bed level, for example? Or a color touchscreen with a very powerful interface that even shows the images of the print, so that you can easily choose the right print. Or the option to interrupt a print yourself to continue it the next day?Compared to, for example, an Ender 3 V2, this printer is a lot cheaper, but it is much better equipped with useful functions that can be important for a novice maker.So, here is my First Impression of the Super Cheap TRONXY XY-2 Pro Printer.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Tronxy #XY2Pro #Cheap3DPrinter #3DprintcreatorThanks for watching this video.
▼ Bend a 3D print after printing for strength 3d-PrintCreator 2021-01-17 | #Shorts #3Dprinting #FinishingThis video shows how to bend a 3D print after printing for strength, so that you can print easier shapes and finish them, under the correct angle, later.Follow me on my YouTube Channel: http://youtube.3D-PrintCreator.comThanks for watching my first YouTube Shorts movie.
▼ Marking metal with a cheap laser and mustard | different types of mustard tested 3d-PrintCreator 2021-01-08 | Watch Next: Much more powerful laser engraver youtu.be/ohVKv9PZlKQDid not see the previous video? Watch it here: youtu.be/W9n7gOlvy9wI used this cheap laser engraver: Ortur Master II http://gbe.st/302mPvPAfter uploading my previous video about engraving stainless steel with a cheap diode laser machine, I noticed that quite a lot of people had problems getting the same result as I had in my video. I spent a long time looking for the root cause of this problem and finally found that the mustard I used was the answer to this question. After trying different types of mustard for metal engraving, I found out that some mustards did not work at all, while others showed a very good result. The difference was really huge and I, therefore, advise everyone to experiment with different types of mustard to get a good result.If you use the right kind of mustard it is certainly possible and you mark metal with a cheap laser and mustard. So try different types of mustard and see what it can do for you.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#OrturMasterLaserEngraver #MarkingStainlessSteel #LaserMarkingSteelThanks for watching this video.
▼ FREE ▼ Ortur Master II AIR ASSIST plus Z LIFT 3d-PrintCreator 2020-12-31 | Get your FREE Ortur Master II Air Assist plus Z Lift from Thingiverse: thingiverse.com/thing:4704160Made for the Ortur Master II Laser Machine: http://gbe.st/302mPvPIn this video, I show how I mount the Air Assist that you can download for free from my website (3d printable STL file) on my Ortur Master II laser engraving machine.By using the Air Assist unit the laser can cut and engrave deeper and faster, making the Ortur Master II much more versatile.The Air-Assist can be printed with any properly calibrated 3D printer that can print PLA plastic. The layer height is 0.2mm and the files must be printed separately from each other. Especially the small clamp part should be printed slowly, otherwise, it will not fit. You may have to sand it to size.I only offer the Air Assist as a file, and will NOT sell it or print it for others. My day-to-day work and family commitments do not allow me to spend time 3D printing for others. If you want the Air Assist, but you don't have a 3D printer, then use 3DHubs or go to a maker space in your own area, they can help you there.The files will be shared under Creative Commons - Non-Commercial licenseYou are free to:Share — copy and redistribute the material in any medium or formatAdapt — remix, transform, and build upon the materialThe licensor cannot revoke these freedoms as long as you follow the license terms.Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.NonCommercial — You may not use the material for commercial purposes.No additional restrictions — You may not apply legal terms or technological measuresThe license prohibits application of effective technological measures, defined with reference to Article 11 of the WIPO Copyright Treaty.NOTE: At a commercial print service, you can get the parts printed in PLA for less than 35,00 Euro shipped to your address. If you have to pay more, you are being ripped off !!!At my local maker space, these parts would be made for approximately 12 to 15 Euro (no shipping).▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Why cant a DIODE laser cut thick materials? | KERF explained 3d-PrintCreator 2020-11-29 | Watch Next: Much more powerful laser engraver youtu.be/ohVKv9PZlKQThe Ortur Master, Neje Master, or any other diode laser machine, they all have a hard time when it comes to cutting materials thicker than 3mm. The reason is that the laser used is a so-called DIODE laser, and they have an unusual KERF.Diode lasers have a light source that is not round, but rectangular, and this light source ensures that the cut that a diode laser makes in the direction of the X axis has a very different thickness than the cut that the same laser makes in the Y axis.Normally with a sawing or cutting device you name the thickness of the cut, and this thickness is then called KERF, but with a diode laser this is difficult to indicate, because there are a few variables that determine the thickness of the cut. That's what this video is about.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#Kerf #laserengraving #lasercuttingThanks for watching this video.
▼ Ortur Obsidian Review | First look at the Ortur Obsidian 3d-PrintCreator 2020-11-22 | BUY THE OBSIDIAN HERE: http://gbe.st/302oHswBest 3D Printer Upgrades: 3d-printcreator.com/best-3d-printer-upgradesThis review is my first experience with a working Ortur Obsidian 3D printer. This printer was sent to me by GearBest after my previously received model became completely defective due to transport to my home.The Ortur Obsidian is a low cost printer with features that you will find in the much more expensive, high end models. Think of a mesh bed leveling function and the relay to automatically switch off the printer after printing. You will not normally find these functions in a printer of this price.As can be seen in this review, I have a bit of an issue with the height of the print bed of this printer, but I solve that by making some rings and placing them between the frame and the bed. After I have done that, this printer prints excellent and I only have good results.Until now I have only tested the printer with PLA filament and a few test models, but of course I will now use the printer for actual production models, and in a few weeks there will be a new review with an extensive look at this 3D printer as I use it every day.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#OrturObsidian #Ortur3DPrinter #Ortur3DThanks for watching this video.
▼ how to 3d Print screw threads | Fusion 360 tutorial 3d-PrintCreator 2020-11-15 | SUBSCRIBE: http://subscribe.3d-printcreator.comWhen you design parts for 3D printing and these parts must contain threads for existing screw sizes, you have to take the tolerances of your 3D printer into account. A 3D printer never prints perfectly, and always has a small deviation that, in most cases, is almost equal to half of your nozzle opening.In this video you will learn how to design a thread in Fusion 360 and then change it, so that you can drive standard size screws directly in your print, without having to tap the thread with a tap first.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprintedthreads #3DprintcreatorThanks for watching this video.
▼ I chose laser cutting instead of 3D printing because of speed 3d-PrintCreator 2020-11-14 | Laser cutting can be faster then 3D Printing. WATCH NEXT: Make an Air Assist Unit for your diode Laser Engraver youtu.be/qubZ67y___sThe big Ortur Master machine, in different power settingshttp://gbe.st/3028i4PAnd it's smaller brother, also in different power settings.http://gbe.st/3028i4OIn the studio and outside, I use lamps that have their own battery, and that can work for about 1 hour with this battery. Sometimes this is not long enough, and at those times I rely on a 10,000 mAh battery pack from Grixx to make sure I can use my video lighting for about 5 hours, at full power.Because I use my lamps on a light stand, it is important that I can also use the battery pack on that light stand. I use a simple piece of string for this, which can hang from the lamp stand as a loop. A simple, but very functional solution.If I had printed the tray with one of my 3D printers, the printing would have taken at least 4 hours, but even 6 hours if I would have printed in the quality I really like, namely 0.2mm layer height. I needed the trays quickly and wanted to be able to manufacture them faster, which is why I looked at laser cutting. With the Ortur Master 2 engraver, equipped with an Air assist unit, I was able to cut the trays in just 12 minutes. As a result, the entire manufacturing, including design and gluing, took about 20 minutes from start to usable product.That's why I think 3D printing is a very convenient way of manufacturing, but not always the best way. Sometimes other forms of subtractive manufacturing are faster, stronger and more useful than additive manufacturing.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#additivemanufacturing #3Dprintcreator #substractivemanufacturingThanks for watching this video.
▼ Best Ortur Master (II) Air Assist Unit | FREE DOWNLOAD 3d-PrintCreator 2020-11-11 | For my Ortur Master lasers, but also for any other laser engraving machine with a 40x40mm laser diode, I have made an Air Assist unit that is very easy to install, and that gives a super good result.The supplies for this Air Assist are:- 2 printed parts (3D Prints)- 1x 4mm screw, 20mm long- 1x 4mm nut- 1x Aquarium pump 150l / min http://gbe.st/302mgmV- 1x air hose with aquarium pump- 1x standard 6mm 3D printer nozzleThe Laser machines can be found here:The big Ortur Master machine, in different power settingshttp://gbe.st/3028i4PAnd it's smaller brother, also in different power settings.http://gbe.st/3028i4OThe files for the 3D printer can be downloaded FREE from my website. Print this with 0.2mm layer height, then the thread in the air pipe will fit perfectly with a 6mm 3D printer nozzle.(Use E3D Style nozzles - I reused an old nozzle, that I replaced weeks ago)My website with the download can be found here: 3d-printcreator.com/ortur-laser-master-15-air-assist-unitMake sure that the 3D printer nozzle that you use for the air assist has an opening of 1 mm in diameter, so that the air can blow through it properly. I myself used an old 0.4mm nozzle, where I made the hole slightly larger with a drill.▼ If you want to buy me a cup of coffee, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comKeywords for this video:#AirAssist #OrturMaster #LaserEngraverThanks for watching this video.
▼ Lets talk 3D printing and Laser engraving | Ask your questions live 3d-PrintCreator 2020-10-22 | ▼ If you want to buy me a nice cold drink, please do so: http://support.3d-printcreator.comWebsite 3d-printcreator.com
▼ Ortur Obsidian 3D printer, Why I think this is the Ender 3 successor 3d-PrintCreator 2020-10-18 | Buy the Ortur Obsidian http://gbe.st/302g1R6and some TPU filament http://gbe.st/302dYUPThe Ortur Obsidian is the latest 3D printer from the Ortur brand. This printer has a bed of 250x250 millimeters and is able to print up to 300mm high, more than enough volume to print most objects.Special details of the Ortur Obsidian are the metal frame, which is extremely strong and really built to last for years, a dual drive extruder, which is placed directly above the hot end, a proximity sensor that measures the bed and a mesh level of the bed allows for printing of the first layers and the latest Marlin interface for easy operation.All of the above features can only be seen together in expensive 3D printers, or 3D printers that have been upgraded by the user himself, but it is rare to find all the features at once in a single printer, straight from the factory. Never mind that this printer is priced as low as this Ortur Obsidian, which is therefore much cheaper than the Creality Ender 3, if you provide it with all these upgrades.My concerns are currently still with the long delivery time and the availability of this 3D printer. I hope Ortur will be able to reduce waiting times and ensure that the printer can be delivered faster. Those who want to buy the printer must now take into account 1 to 2 months delivery time.Time will tell, but I think the Ortur Obsidian may well be the successor to the long-standing Ender 3 printer, because the Ortur is packed with the latest technology at a very attractive price.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#OrturObsidian #Ortur #Obsidian #3DPrintCreatorThanks for watching this video.
▼ The ORTUR OBSIDIAN 3D Printer someone played soccer with | Ortur Obsidian review 3d-PrintCreator 2020-10-14 | A few months ago I was asked by Gearbest if I wanted to review the very latest Ortur Obsidian 3D Printer? A printer with a very nice low price level, but executed in high-end materials and equipped with all luxury functions that you normally only find on much more expensive machines. Of course, I immediately said I wanted to review the printer and about a week ago I got a message that the printer had indeed been sent to my address.Since I was not at home when the 3D printer was delivered, my neighbor took delivery of the box, and that box had quite a few damages. Both cracks and obvious dents. I would not have accepted this box myself, but unfortunately, my neighbor did.Actually, I planned to unbox and assemble the 3D printer in a live stream, but given the damage to the box, it seemed more sensible to assemble the printer first and then stream the first print with the machine.It soon became clear that this was not going to happen because almost every part that can break is actually defective. Although the printer was packed very well, and shipped in very thick foam and in a thick cardboard box, the UPS deliverers must have managed to play a game of football with the box, because the printer housing, the print bed, the X axis, the double Z axis and even the display are all bent, dented or broken. Not one part of the printer is intact, while the printer is really made of very solid thick metal. Much thicker than many other printers I have here.I would really not be doing the 3D printer, and the Ortur brand, a good service if I were to review this scrapped printer. The printer is more severely damaged than repairable. You can never straighten metal that is really bent, you have to replace it. And if almost all metal parts are bent, the printer will never be perfectly square again.Unfortunately, I cannot review the printer for this reason, I would have liked it differently. Now, I am going to ask Gearbest to check via Ortur if it is possible to receive another review unit. One that might be shipped with a carrier other than UPS, because I'm sure it's not the packaging, nor the build quality of the printer. This printer really died during transport to my studio.
▼ Better bed adhesion than in my old videos | Da Vinci Pro 3d-PrintCreator 2020-09-28 | Magnetic blue print bed 200x200mm : http://gbe.st/302eJxPSquare Magnetic Print Bed 220x220mm : http://gbe.st/302cDGKUltrabase Glass bed 235x235mm: http://gbe.st/302eJxRBIGGER SIZEMagnetic PEI flex plate 320x310mm: http://gbe.st/302cDGLIn my older videos that I made about the Da Vinci Pro printers, and maybe also about other printers, I often talked about what material I used as a print bed. I often mentioned the blue painter's tape, kapton tape, and buildtak as materials to use because at the time these videos were being made, it was the very best you could get.At the moment, however, there are so many better materials out there that give a much better adhesion of the print to the print bed that I don't support my old videos anymore, but still I don't want to delete them because they help thousands of people who have an XYZprinting printer because they are still for sale to this day and very popular.That's why I place a link to this video in a prominent place with all my old videos about these print bed materials, so that everyone can see this. I hope this video helps, and that everyone who watches the old videos also sees this video and understands that the old videos on this specific topic are no longer up to date.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinterbed #heatedbed #3dprintcreatorThanks for watching this video.
▼ Laser engraving and cutting, the full tutorial. Part 1 3d-PrintCreator 2020-09-15 | After receiving many questions about my laser machines I decided to answer all questions in an ultimate laser engraving and cutting full tutorial. WATCH NEXT: Make an Air Assist Unit for your diode Laser Engraver youtu.be/qubZ67y___sThis video is very suitable for anyone who wants to buy a laser engraving or cutting machine, or who already has one, but wants to get better results. If you don't have a laser engraving machine yet, I have a number of affiliate links to GearBest below, where they sell very good machines, which I think are the cheapest. The fact that these are affiliate links doesn't matter what you pay for, but it helps my channel a lot as I receive a small percentage of the sale.The big Ortur Master machine, in different power settingshttp://gbe.st/3028i4PAnd it's smaller brother, also in different power settings.http://gbe.st/3028i4OIn this video, I also talk about the Beilstein test, about which I made an extensive video before. This is really important to watch because you don't want to be inhaling dangerous, deadly chlorine gases.youtu.be/4i9Pa99j5XMI hope this video has helped you to get much better results from your laser machine. If you have any questions, ask them below this video and I will answer them.Timeline for this video0:00 intro0:32 In this video1:56 Input power versus actual laser power3:26 How much laser power do you need8:36 Engraving or Cutting, the differences9:50 Comparing 8 bit lasers versus 32 bit lasers12:22 Total control when engraving an object14:20 The light triangle16:44 Different settings for cutting and engraving20:53 The Beilstein test21:49 Ending▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.com#laserengraver #lasercutter #laserengravingtutorial #3DprintcreatorThanks for watching this video.
▼ recreating a SPUR GEAR for a LATHE 3d-PrintCreator 2020-08-21 | An acquaintance of my wife has a lathe that regularly breaks a gear wheel. This gear is the weakest link in the machine and breaks regularly just to protect the rest of the machine, but replacing this gear costs a whopping 54 Euro, every time it happens. He was looking for a cheaper way to get the gear, and my wife thought I could help with this. So I drew the gear for him in Fusion360 and then we looked for an online printing service that could make the gear in the same hard material as the original gear was made of, namely POM.Now he can order the gears per ten for only 9 Euro each, which is of course a huge cost saving compared to the original gears. Plus, the POM printed gears are really just as strong and durable as the original gears he always bought. So the functionality of his lathe is retained.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
▼ Alfawise C50 Laser Engraver REVIEW 3d-PrintCreator 2020-08-16 | gearbest.com/laser-engraving-machine/pp_009464153627.html?wid=1433363&lkid=79728381coupon：ALFAWISEC50 for 10 Dollar offI received the Alfawise C50 laser engraver from GearBest to review. This laser engraver is a self-contained unit that you can easily put over the object to be engraved. You can then connect the Alfawise C50 to the wall socket using an adapter, or use it with a USB power source, such as a battery. This makes it possible to use the unit completely separate from the mains.On the top of the Alfawise C50 you will find 2 USB connections. So one is for powering the device with a USB power supply, but the other is for connecting the laser engraver to a computer. However, this is not necessary because you can also download an APP on your phone and use the machine without turning on a computer.In the Aoo you can convert photos to a laser file, you can make and engrave text with it, or you can engrave nice drawings, which are offered from the App.The App is not completely ready yet, because here and there it has not been translated properly and there are also some problems with the layout when you create a text, but with a simple workaround you can also get there.▼ If you want to buy me a nice cold drink, please do so:http://support.3d-printcreator.com▼ Subscribe to me on YouTube:http://subscribe.3d-printcreator.com▼ Find me on Thingiverse:http://thingiverse.3d-printcreator.com▼ Follow me on Twitter:http://twitter.3d-printcreator.com▼ Or on my website:3d-printcreator.comHave any questions for me? Feel free to ask them here or on my other social media accounts.Keywords for this video:#3Dprinter #3Dprinting #XYZPrinting #3DprintcreatorThanks for watching this video.
