Uploaded August 2026 | Updated November 2026, 3 hours ago
Marconi 2955R Radio Test Set Repair & Restoration
This video features the Marconi 2955R—a special model equipped with the factory-installed sensitive receiver option (also available on the 2955B). This feature allows off-air signal monitoring similar to a dedicated receiver or scanner, with added signal strength analysis.
Key Repairs & Servicing:
Self-Test Failure Diagnostic: Used a spectrum analyzer to locate and resolve low/no-gain amplifier faults.
RF Assembly Restoration: Removed, cleaned, and repaired the delicate coaxial switch and step attenuator.
Module Repairs: Serviced both the RF Counter and RF Signal Generator sections.
Front Panel Maintenance: Disassembled, cleaned, and repaired internal push-button contacts.
Calibration & Alignment: Calibrated the RF output level using a Marconi 6204B Scalar Analyzer and adjusted the reference oscillator/timebase to within 1 Hz accuracy.
Demonstration:
We finish with a full reassembly, a clean self-test pass screen, a demonstration of the sensitive off-air receiver, and tips on safely servicing the delicate spring-metal coaxial switch and step attenuator
Marconi 2955R Radio Test Set Repair & Restoration
This video features the Marconi 2955R—a special model equipped with the factory-installed sensitive receiver option (also available on the 2955B). This feature allows off-air signal monitoring similar to a dedicated receiver or scanner, with added signal strength analysis.
Key Repairs & Servicing:
Self-Test Failure Diagnostic: Used a spectrum analyzer to locate and resolve low/no-gain amplifier faults.
RF Assembly Restoration: Removed, cleaned, and repaired the delicate coaxial switch and step attenuator.
Module Repairs: Serviced both the RF Counter and RF Signal Generator sections.
Front Panel Maintenance: Disassembled, cleaned, and repaired internal push-button contacts.
Calibration & Alignment: Calibrated the RF output level using a Marconi 6204B Scalar Analyzer and adjusted the reference oscillator/timebase to within 1 Hz accuracy.
Demonstration:
We finish with a full reassembly, a clean self-test pass screen, a demonstration of the sensitive off-air receiver, and tips on safely servicing the delicate spring-metal coaxial switch and step attenuator










