Uploaded October 2025 | Updated November 2026, 3 hours ago
Here i have been asked by a Radio Ham to test two piceces of radio gear as this owner wants to sell them & needed to know they are ok. As such we test out with a 7 meter HF vertical antenna the YAESU ATU & we take a look inside. We then progress onto the ICOM 707 which we test on the Rohde & Schwarz CMS33 Radio test set. we look at RX & TX spec testing the receiver sensitivity in SSB mode & we also check the TX RF Power using additional features of the CMS33 to read peak RF power (PEP) rather than average power we get an indicaiton of the peak RF output confirming the absoloute max TX power. we then remove the lid to look inside & check for any modifaions or previous repairs & connect the up to an external HF antenna to receive off air signals.
Here i have been asked by a Radio Ham to test two piceces of radio gear as this owner wants to sell them & needed to know they are ok. As such we test out with a 7 meter HF vertical antenna the YAESU ATU & we take a look inside. We then progress onto the ICOM 707 which we test on the Rohde & Schwarz CMS33 Radio test set. we look at RX & TX spec testing the receiver sensitivity in SSB mode & we also check the TX RF Power using additional features of the CMS33 to read peak RF power (PEP) rather than average power we get an indicaiton of the peak RF output confirming the absoloute max TX power. we then remove the lid to look inside & check for any modifaions or previous repairs & connect the up to an external HF antenna to receive off air signals.










