Uploaded November 2026 | Updated November 2026, 2 days ago
The Badger hardsuits are an iconic part of the US Army range in Marcher. Tough, capable of wielding enormous weaponry, it's easy to think of them as being similar to Terminators in a Space Marine range. That said, they're quite a bit bigger, standing even slightly taller than the Heavy Mechanized Infantry from Trench Crusade!
Find Golden Dragon Games' MMF frontpage where the STLs for this print are from: myminifactory.com/profile/GoldenDragonGames/store
Or check out the (absolutely enormous) Wargames Atlantic range where you can pick up the extant plastic Marcher range through the following affiliate link, and I net a wee commission off any purchases at no extra cost to you! https://wargamesatlantic.com?ref=sonicsledge
00:00 - Intro
00:49 - Priming Notes
01:19 - Basecoats
05:51 - Shading
07:24 - Weathering & Basing
14:15 - The Finished Hardsuit
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
instagram.com/sonicsledgehammer
ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge Primer)
ARMY PAINTER:
Oak Brown
Dark Feldgrau (Historical) - also available as Dark Drab
Dark Olive (Historical)
Brainmatter Beige
Ancient Hone (Speedpaint)
Slaughter Red (Speedpaint)
Beowulf Blue (Speedpaint
Heavy Metal (John Blanche)
Leather Brown
Rifle Brown (Historical)
Grimdark Shadow (John Blanche)
Strong Tone
Canvas (Historical)
Mid Feldgrau (Historical)
Banshee Brown (John Blanche)
Plate Mail Metal
Grim Rust (John Blanche)
Rust Tone
Sunburst Ochre (John Blanche)
Gloss Varnish
VARNISH:
Matt Varnish Spray (Army Painter)
The Badger hardsuits are an iconic part of the US Army range in Marcher. Tough, capable of wielding enormous weaponry, it's easy to think of them as being similar to Terminators in a Space Marine range. That said, they're quite a bit bigger, standing even slightly taller than the Heavy Mechanized Infantry from Trench Crusade!
Find Golden Dragon Games' MMF frontpage where the STLs for this print are from: myminifactory.com/profile/GoldenDragonGames/store
Or check out the (absolutely enormous) Wargames Atlantic range where you can pick up the extant plastic Marcher range through the following affiliate link, and I net a wee commission off any purchases at no extra cost to you! https://wargamesatlantic.com?ref=sonicsledge
00:00 - Intro
00:49 - Priming Notes
01:19 - Basecoats
05:51 - Shading
07:24 - Weathering & Basing
14:15 - The Finished Hardsuit
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
instagram.com/sonicsledgehammer
ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge Primer)
ARMY PAINTER:
Oak Brown
Dark Feldgrau (Historical) - also available as Dark Drab
Dark Olive (Historical)
Brainmatter Beige
Ancient Hone (Speedpaint)
Slaughter Red (Speedpaint)
Beowulf Blue (Speedpaint
Heavy Metal (John Blanche)
Leather Brown
Rifle Brown (Historical)
Grimdark Shadow (John Blanche)
Strong Tone
Canvas (Historical)
Mid Feldgrau (Historical)
Banshee Brown (John Blanche)
Plate Mail Metal
Grim Rust (John Blanche)
Rust Tone
Sunburst Ochre (John Blanche)
Gloss Varnish
VARNISH:
Matt Varnish Spray (Army Painter)
![Painting Freeguild Infantry - Cities of Sigmar, Battle-Ready & Beyond [How I Paint Things]
Im a sucker for box art. People with a far finer eye for colour and composition than I have are the ones that first put their minds to creating those colour schemes, so... Ill take a swing at the standard first before doing anything crazy! Luckily, the Steelhelm infantry are some really nice miniatures with plenty of detail thats not demanding on a painter to get a pretty sharp result.
If you need some help with tricky transfers: https://www.youtube.com/watch?v=5l_D3Azp4bw
Keeping eyes simple and easy to paint: https://www.youtube.com/watch?v=Zb3GnzA272U&t=1s
00:00 - Intro
00:46 - A Quick Note on Priming
02:19 - Basecoats
10:03 - Shading
11:59 - Battle Ready Finished
12:03 - Highlights & Finishing Touches
16:17 - The Finished Freeguild
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE:
Stirland Mud texture paint applied in a thick layer, drybrushed with Golgfag Brown and Tyrant Skull once done. Apply tufts to taste and paint the base rim in Dryad Bark. Done!
PAINTS USED:
PRIMER:
Chaos Black, Wraithbone (Citadel Spray)
CITADEL:
Guilliman Flesh (Contrast)
Black Templar (Contrast)
Blood Angels Red (Contrast)
Iyanden Yellow (Contrast)
Garaghaks Sewer (Contrast)
Snakebite Leather (Contrast)
Baal Red (Contrast)
Skeleton Horde (Contrast)
Iron Warriors (Base)
Iron Hands Steel (Base)
Retributor Armour (Base)
Agrax Earthshade (Shade)
Lahmian Medium (Technical)
Reikland Fleshshade (Shade)
Wraithbone (Base)
Flayed One Flesh (Layer)
Fire Dragon Bright (Layer)
Ushabti Bone (Layer)
Liberator Gold (Layer)
ARMY PAINTER:
Bony Matter (Speedpaint)
VALLEJO:
Steel (Model Air)
VARNISH:
Instar Varnish+ Painting Freeguild Infantry - Cities of Sigmar, Battle-Ready & Beyond [How I Paint Things]](https://i.ytimg.com/vi/AxPEaWq4KCc/mqdefault.jpg)
![Painting the M3 Lee/Grant - Warlords Plastic Kit [How I Paint Things]
The American-built M3 Medium Tank was always intended as a stopgap solution between what was needed and what was currently available. Nonetheless, it would soldier on until the end of the war in some theaters, and was a massive boost to Allied power in the western desert when it first began tangling with the panzers that were no longer able to casually bounce Allied firepower. The M3 Lee was the original version, where the M3 Grant was modified during manufacturing for British requirements; both would be supplied to British forces across multiple fronts, and despite its immense size these M3 Mediums could wreak a bloody toll on the lighter, thinner Japanese tanks they faced.
Check out the entire Warlord Games range at their website here: https://r.warlordgames.com/aff/?SONICSLEDGEHAMMER Purchases made through this affiliate link net me a small commission at no cost to you!
00:00 - Intro
01:10 - Priming Notes
01:44 - Basecoating Green
03:12 - Wash Mix
04:30 - Drybrushing Green
06:18 - Other Details
07:40 - Apply Decals
09:02 - Weathering
16:13 - The Finished Tank
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge)
ARMY PAINTER:
Webbing Green (Historical)
Strong Tone (Wash)
Olive Drab (Fanatic)
Mud Spatter (Historical)
Dark Leather (Historical)
Brigadine Brown (Fanatic)
Fresh Rust (Effect)
Oil Stains (Effect)
VARNISH:
Matt Varnish Spray (Army Painter) Painting the M3 Lee/Grant - Warlords Plastic Kit [How I Paint Things]](https://i.ytimg.com/vi/Az84Qs0cn5U/mqdefault.jpg)
![Quick Army Painting Methods: Skaven Clanrats [How I Paint Things]
Skaven are one of those armies where painting them means painting a LOT of them. It doesnt mean that the process has to be difficult or time-consuming, though! One or two of my suggestions might fly in the face of conventional wisdom, but trust me... sometimes you just want to bucket on that paint in one thick coat, and _not_ like its Contrast!
00:00 - Intro
00:31 - Priming Notes
01:35 - Basecoats
10:07 - Shading
11:27 - Highlights & Finishing Touches
15:53 - The Finished Skaven
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Matt Black, Oak Brown (Army Painter Spray)
ARMY PAINTER:
Oak Brown (Fanatic) - if needed
Fur Brown (Fanatic)
Desert Yellow (Fanatic)
Deep Grey (Fanatic)
Dragon Red (Fanatic)
Leather Brown (Fanatic)
Moonstone Skin (Fanatic)
Skeleton Bone (Fanatic)
Death Metal (Fanatic)
True Copper (Fanatic)
Gun Metal (Fanatic)
Ancient Stone (Fanatic)
Strong Tone (Wash)
Speedpaint Medium
Fresh Rust (Effect)
Dark Red Tone (Wash)
Plate Mail Metal (Fanatic)
VARNISH:
Matt Varnish (Army Painter Spray)
THE BASE: Apply a layer of Citadel Stirland Mud (Technical) then heavily drybrush with Golgfag Brown (Dry) and lightly with Tyrant Skull (Dry). Add tufts to taste and paint the base rim in AP Oak Brown. Quick Army Painting Methods: Skaven Clanrats [How I Paint Things]](https://i.ytimg.com/vi/BIn6NWsq5I8/mqdefault.jpg)
![One-Coat Paints: Speedpainting US Infantry for WWII Gaming [How I Paint Things]
By popular demand (its been a while since Ive had to say that!) comes the second in what should, by rights, turn into a relatively long-running series of sorts. Quite by accident, no less! Questions abound about painting WWII infantry of each and every nation involved, How do I paint them with Contrast? Well, Contrast not being alone on the market, sometimes its a case of choosing the right tool for the job... and Ive scoured the Big Three ranges for how you can paint your Bolt Action, Chain of Command, or even Flames of War miniatures with these one-coat paints.
00:00 - Intro
00:58 - Priming Notes
01:40 - White Drybrush: Is Half Slapchop just a Slap?
02:13 - One-Coat Basecoats
09:37 - Varnish
11:37 - The Finished Infantryman
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: PVA and sand, painted with Flat Brown, heavily overbrushed Brown Sand, then drybrushed Dark Sand. Dots of PVA again to add some static grass, and done!
PAINTS USED:
PRIMER:
Bone White (Vallejo Spray Can)
VALLEJO:
White
Commando Green (Xpress)
Wasteland Brown (Xpress)
Willow Bark (Xpress)
Mahogany (Xpress)
Bag of Bones (Xpress)
Camo Olive Green
CITADEL:
Guilliman Flesh (Contrast)
Black Legion (Contrast)
Flayed One Flesh (Layer)
ARMY PAINTER:
Bony Matter (Speedpaint)
Military Shader (or Shade, depending on name change - Wash)
Strong Tone
VARNISHES:
Varnish+ (Instar) One-Coat Paints: Speedpainting US Infantry for WWII Gaming [How I Paint Things]](https://i.ytimg.com/vi/BOTnNmGZY7Y/mqdefault.jpg)
![Painting Knights on Foot - Old World or Otherwise! [How I Paint Things]
With pre-orders for The Old World going live tomorrow, I have the strangest feeling theres going to be a lot of people wanting to paint knightly orders, men-at-arms, and other such fantasy warriors of a Gallic nature... Luckily, this is all fairly broad spectrum advice; you could use it to knock out a bunch of Perry Miniatures foot sergeants or similar enough without having to change a thing.
The wonderful Knights of Gallia and other old-school fantasy wargaming miniatures from Highlands Miniatures can be found here: https://www.myminifactory.com/users/Highlandsminis If you havent got your own printer, theres licensed printers on Etsy and similar - try getting in touch with the team directly to see if they have a licensed printer in your area.
00:00 - Intro
00:58 - A Quick Note on Assembly
02:20 - Basecoats
10:22 - Shading
16:29 - The Finished Foot Knight
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE:
Stirland Mud texture paint applied in a thick layer, drybrushed with Golgfag Brown and Tyrant Skull once done. Apply thinned PVA and static grass in patches, then a tuft or two for volume and variety on the base. Paint the rim in Mournfang Brown and done!
PAINTS USED:
PRIMER:
Grey (Vallejo Spray Can)
ARMY PAINTER:
Plate Mail Metal
Oak Brown
Brainmatter Beige
CITADEL:
Cadian Fleshtone (Layer)
Mephiston Red (Base)
Ushabti Bone (Layer)
Pallid Wych Flesh (Layer)
Retributor Armour (Base)
XV-88 (Base)
Agrax Earthshade (Shade)
Lahmian Medium (Technical)
Gorthor Brown (Layer)
Wild Rider Red (Layer)
Skavenblight Dinge (Layer)
Kislev Flesh (Layer)
Flayed One Flesh (Layer)
Ungor Flesh (Layer)
VALLEJO:
Black Grey
Black
VARNISH:
Instar Varnish+ Painting Knights on Foot - Old World or Otherwise! [How I Paint Things]](https://i.ytimg.com/vi/C39zhqXCFPE/mqdefault.jpg)

![Painting Vietnam-era US Army Infantry - Drybrush and a Wash [How I Paint Things]
One of the best things about the mid-20th Century US Army uniform is how itd linger on well past the introduction of camouflage gear as standard, and something approximating it would be seen in armed forces around the world. You could feasibly paint these guys as almost any US-aligned military with just a couple of tweaks, which might finally let some more of my Soviet Motostrelki see action on the table!
Find Charlie Country Part One here: www.kickstarter.com/projects/w3-wargaming/charlie-country-part-1 Its casually sailing through stretch goals at the moment, so never a bad idea to leap in if youve got a printer.
00:00 - Intro
01:13 - Priming Notes
01:38 - Basecoats
08:03 - Wash
10:03 - Highlights & Finishing Touches
12:39 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Uniform Grey (Army Painter Spray)
ARMY PAINTER:
Schilf Green (Historical)
Dark DAK Green (Historical)
Light DAK Green (Historical)
Raw Wool (Historical)
Topaz Skin (Fanatic)
Necrotic Flesh (Fanatic)
Camouflage Green (Fanatic)
Woodland Camo (Fanatic)
Bleached Strap Grey (Historical)
Matt Black (Fanatic)
Strong Tone (Wash)
Quickshade Medium
Jasper Skin (Fanatic)
Tourmaline Skin (Fanatic)
VARNISH:
Matt Varnish Spray (Army Painter)
THE BASE:
Apply a layer of PVA glue and dip the base into some sand or similar basing material. Let it dry thoroughly, then paint on watered-down Oak Brown, and after thats likewise dry, drybrush in Paratrooper Tan, then lightly with Urban Buff. Apply tufts to taste. Painting Vietnam-era US Army Infantry - Drybrush and a Wash [How I Paint Things]](https://i.ytimg.com/vi/CJBwr9WZD9I/mqdefault.jpg)

![Speedpainting Stormtroopers - Same Method, Different Styles [How I Paint Things]
White armour still has a reputation for being tricky to paint, which I think is a little undeserved. By starting with the other colours on a miniature - just black in this case! - youve got the opportunity to tidy up as you go, then shade how you like. This is just two potential methods, and Ive done other Stormtrooper variants in the past as well, so youll have plenty of choices on what appearance you like!
Dark Fire Designs can be found here: https://darkfiredesigns.com/
Use the checkout code SonicSledge for 10% off any STL purchases!
00:00 - Intro
00:53 - Priming Notes
01:16 - Basecoats
04:07 - Two Different Shading Methods
07:29 - Highlighting
10:53 - The Finished Stormtroopers
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Matt White (Army Painter Spray)
ARMY PAINTER:
Grim Black (Speedpaint)
Ashen Stone (Speedpaint)
Matt White (Fanatic)
Speedpaint Medium
Battleship Grey (Speedpaint)
Dark Tone (Wash)
VARNISH:
Munitorum Varnish Spray (Citadel)
THE BASE: Apply a layer of Citadel Stirland Mud, drybrush heavily with Citadel Golgfag Brown, then lightly again with Citadel Tyrant Skull. Add tufts to taste. Speedpainting Stormtroopers - Same Method, Different Styles [How I Paint Things]](https://i.ytimg.com/vi/Cb_mLXxUqU4/mqdefault.jpg)
![Fallout: Wasteland Warfare - Outcast Power Armor [How I Paint Things]
Like most everyone online at the moment, I blasted through the Fallout show on Amazon Prime over the course of a couple days - I cant binge a whole show in one day, but I tried! It immediately left me wanting more... and before the end of the day Id ordered a couple boxes of miniatures and the Modiphius Fallout RPG book. Because, yknow, I am nothing if not easily distracted!
Painted to resemble my old Fallout 3 character storming across the Capitol Wasteland in recovered Outcast power armor, this is a pretty striking difference to most of the shining silver painting guides - even ones Ive done in the past!
Check out the previous power armor painting guide Ive done: https://youtu.be/RnwKHRipOMQ?si=MpiefqoACjOIe5MP
00:00 - Intro
00:57 - Priming Notes
01:20 - Basecoats
08:13 - Shading
09:16 - Highlights & Finishing Touches
12:18 - The Finished Outcast
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Stirland Mud Earth texture paste, heavily overbrushed with Golgfag Brown, then lightly drybrushed with Tyrant Skull. Add tufts to taste, paint the base rim Dryad Bark. Done!
PAINTS USED:
PRIMER:
Matt Black (Army Painter Spray)
VALLEJO:
Black Grey
German Grey
CITADEL:
Iron Hands Steel (Base)
Mephiston Red (Base)
Necron Compound (Dry)
Mournfang Brown (Base)
Mechanicus Standard Grey (Base)
Evil Sunz Scarlet (Layer)
Skrag Brown (Layer)
ARMY PAINTER:
Dark Tone
VARNISHES:
Varnish+ (Instar) Fallout: Wasteland Warfare - Outcast Power Armor [How I Paint Things]](https://i.ytimg.com/vi/DM10P9-tIHY/mqdefault.jpg)
![One-Hour Heroes - Classic Speedpainting RPG Figures [How I Paint Things]
One thing I forgot to mention in the video was the origin of todays miniature! Shes a 3D print from Vae Victis Miniatures, who do wonderful modular fantasy-themed figures. Find them at https://www.myminifactory.com/users/VaeVictisMiniatures where physical prints are also available!
Sometimes you want that middle ground - a miniature you can put on the table thats reasonably nicely painted, but without taking a month of Sundays to get them finished. Pick something that you want to look the business, and let the rest be background to that; I like to have faces front and center on my figures, but it can as easily be a cape or cloak, a neat shield, or anything else youre good at and enjoy painting across a warband. At this rate, Im hoping to have my Five Leagues from the Borderlands starting warband ready for next weekend!
00:00 - Intro
01:17 - Priming
01:32 - Basecoats
07:51 - Shading
08:37 - Highlighting
11:32 - The Finished Hero
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE:
A layer of Stirland Mud (Citadel) overbrushed with Leather Brown, then Dorado Flesh. Add tufts to taste, paint base rim in Oak Brown.
PAINTS USED:
PRIMER:
Leather Brown (Army Painter Spray)
ARMY PAINTER:
Ancient Stone (Fanatic)
Satchel Brown (Speedpaint)
Fire Drake (Speedpaint)
Topaz Skin (Fanatic)
Pharoah Guard (Fanatic)
Deep Grey (Fanatic)
Matt Black (Fanatic)
Weapon Bronze (Fanatic)
Plate Mail Metal (Fanatic)
Fur Brown (Fanatic)
Strong Skin Shade
Speedpaint Medium
Barbarian Flesh (Fanatic)
Dorado Flesh (Fanatic)
Aqua Alchemy (Fanatic)
VARNISH:
Instar Varnish+ One-Hour Heroes - Classic Speedpainting RPG Figures [How I Paint Things]](https://i.ytimg.com/vi/Db9VM9Spxvg/mqdefault.jpg)