Uploaded July 2024 | Updated November 2026, 2 days ago
The German recipe's a bit of a word salad comment, so edited here for clarity: Prime with Vallejo Field Grey primer, drybrush Stone Grey over jackets and such.
Basecoat skin with AP Topaz Skin, bread bags and StG ammo pouches with VJ Khaki, water bottles with VJ Flat Earth, gas mask containers and mess tins in VJ Camo Olive Green, and any pack rolls with US Dark Green.
Rifles and wood with VJ Beige Brown, black leather and boots with VJ Black Grey, then brown leather straps and slings with VJ German Camo Black Brown.
Helmets with VJ German Grey.
White cloth basecoated in VJ Ivory, and finally black bits on weapons painted VJ Black.
Wash the whole thing in Sonic Tonic (link below), and highlight faces with GW Cadian Fleshtone then GW Kislev Flesh, highlight white cloth with either fresh VJ Ivory or VJ Off-White, and job's done.
youtu.be/kDOkiEcNcik?si=EHQAVFmYRU5FnVRj
youtube.com/watch?v=a5mDIeEKD9A
The German recipe's a bit of a word salad comment, so edited here for clarity: Prime with Vallejo Field Grey primer, drybrush Stone Grey over jackets and such.
Basecoat skin with AP Topaz Skin, bread bags and StG ammo pouches with VJ Khaki, water bottles with VJ Flat Earth, gas mask containers and mess tins in VJ Camo Olive Green, and any pack rolls with US Dark Green.
Rifles and wood with VJ Beige Brown, black leather and boots with VJ Black Grey, then brown leather straps and slings with VJ German Camo Black Brown.
Helmets with VJ German Grey.
White cloth basecoated in VJ Ivory, and finally black bits on weapons painted VJ Black.
Wash the whole thing in Sonic Tonic (link below), and highlight faces with GW Cadian Fleshtone then GW Kislev Flesh, highlight white cloth with either fresh VJ Ivory or VJ Off-White, and job's done.
youtu.be/kDOkiEcNcik?si=EHQAVFmYRU5FnVRj
youtube.com/watch?v=a5mDIeEKD9A
![Painting Vietnam-era US Army Infantry - Drybrush and a Wash [How I Paint Things]
One of the best things about the mid-20th Century US Army uniform is how itd linger on well past the introduction of camouflage gear as standard, and something approximating it would be seen in armed forces around the world. You could feasibly paint these guys as almost any US-aligned military with just a couple of tweaks, which might finally let some more of my Soviet Motostrelki see action on the table!
Find Charlie Country Part One here: www.kickstarter.com/projects/w3-wargaming/charlie-country-part-1 Its casually sailing through stretch goals at the moment, so never a bad idea to leap in if youve got a printer.
00:00 - Intro
01:13 - Priming Notes
01:38 - Basecoats
08:03 - Wash
10:03 - Highlights & Finishing Touches
12:39 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Uniform Grey (Army Painter Spray)
ARMY PAINTER:
Schilf Green (Historical)
Dark DAK Green (Historical)
Light DAK Green (Historical)
Raw Wool (Historical)
Topaz Skin (Fanatic)
Necrotic Flesh (Fanatic)
Camouflage Green (Fanatic)
Woodland Camo (Fanatic)
Bleached Strap Grey (Historical)
Matt Black (Fanatic)
Strong Tone (Wash)
Quickshade Medium
Jasper Skin (Fanatic)
Tourmaline Skin (Fanatic)
VARNISH:
Matt Varnish Spray (Army Painter)
THE BASE:
Apply a layer of PVA glue and dip the base into some sand or similar basing material. Let it dry thoroughly, then paint on watered-down Oak Brown, and after thats likewise dry, drybrush in Paratrooper Tan, then lightly with Urban Buff. Apply tufts to taste. Painting Vietnam-era US Army Infantry - Drybrush and a Wash [How I Paint Things]](https://i.ytimg.com/vi/CJBwr9WZD9I/mqdefault.jpg)

![Speedpainting Stormtroopers - Same Method, Different Styles [How I Paint Things]
White armour still has a reputation for being tricky to paint, which I think is a little undeserved. By starting with the other colours on a miniature - just black in this case! - youve got the opportunity to tidy up as you go, then shade how you like. This is just two potential methods, and Ive done other Stormtrooper variants in the past as well, so youll have plenty of choices on what appearance you like!
Dark Fire Designs can be found here: https://darkfiredesigns.com/
Use the checkout code SonicSledge for 10% off any STL purchases!
00:00 - Intro
00:53 - Priming Notes
01:16 - Basecoats
04:07 - Two Different Shading Methods
07:29 - Highlighting
10:53 - The Finished Stormtroopers
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Matt White (Army Painter Spray)
ARMY PAINTER:
Grim Black (Speedpaint)
Ashen Stone (Speedpaint)
Matt White (Fanatic)
Speedpaint Medium
Battleship Grey (Speedpaint)
Dark Tone (Wash)
VARNISH:
Munitorum Varnish Spray (Citadel)
THE BASE: Apply a layer of Citadel Stirland Mud, drybrush heavily with Citadel Golgfag Brown, then lightly again with Citadel Tyrant Skull. Add tufts to taste. Speedpainting Stormtroopers - Same Method, Different Styles [How I Paint Things]](https://i.ytimg.com/vi/Cb_mLXxUqU4/mqdefault.jpg)
![Fallout: Wasteland Warfare - Outcast Power Armor [How I Paint Things]
Like most everyone online at the moment, I blasted through the Fallout show on Amazon Prime over the course of a couple days - I cant binge a whole show in one day, but I tried! It immediately left me wanting more... and before the end of the day Id ordered a couple boxes of miniatures and the Modiphius Fallout RPG book. Because, yknow, I am nothing if not easily distracted!
Painted to resemble my old Fallout 3 character storming across the Capitol Wasteland in recovered Outcast power armor, this is a pretty striking difference to most of the shining silver painting guides - even ones Ive done in the past!
Check out the previous power armor painting guide Ive done: https://youtu.be/RnwKHRipOMQ?si=MpiefqoACjOIe5MP
00:00 - Intro
00:57 - Priming Notes
01:20 - Basecoats
08:13 - Shading
09:16 - Highlights & Finishing Touches
12:18 - The Finished Outcast
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Stirland Mud Earth texture paste, heavily overbrushed with Golgfag Brown, then lightly drybrushed with Tyrant Skull. Add tufts to taste, paint the base rim Dryad Bark. Done!
PAINTS USED:
PRIMER:
Matt Black (Army Painter Spray)
VALLEJO:
Black Grey
German Grey
CITADEL:
Iron Hands Steel (Base)
Mephiston Red (Base)
Necron Compound (Dry)
Mournfang Brown (Base)
Mechanicus Standard Grey (Base)
Evil Sunz Scarlet (Layer)
Skrag Brown (Layer)
ARMY PAINTER:
Dark Tone
VARNISHES:
Varnish+ (Instar) Fallout: Wasteland Warfare - Outcast Power Armor [How I Paint Things]](https://i.ytimg.com/vi/DM10P9-tIHY/mqdefault.jpg)
![One-Hour Heroes - Classic Speedpainting RPG Figures [How I Paint Things]
One thing I forgot to mention in the video was the origin of todays miniature! Shes a 3D print from Vae Victis Miniatures, who do wonderful modular fantasy-themed figures. Find them at https://www.myminifactory.com/users/VaeVictisMiniatures where physical prints are also available!
Sometimes you want that middle ground - a miniature you can put on the table thats reasonably nicely painted, but without taking a month of Sundays to get them finished. Pick something that you want to look the business, and let the rest be background to that; I like to have faces front and center on my figures, but it can as easily be a cape or cloak, a neat shield, or anything else youre good at and enjoy painting across a warband. At this rate, Im hoping to have my Five Leagues from the Borderlands starting warband ready for next weekend!
00:00 - Intro
01:17 - Priming
01:32 - Basecoats
07:51 - Shading
08:37 - Highlighting
11:32 - The Finished Hero
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE:
A layer of Stirland Mud (Citadel) overbrushed with Leather Brown, then Dorado Flesh. Add tufts to taste, paint base rim in Oak Brown.
PAINTS USED:
PRIMER:
Leather Brown (Army Painter Spray)
ARMY PAINTER:
Ancient Stone (Fanatic)
Satchel Brown (Speedpaint)
Fire Drake (Speedpaint)
Topaz Skin (Fanatic)
Pharoah Guard (Fanatic)
Deep Grey (Fanatic)
Matt Black (Fanatic)
Weapon Bronze (Fanatic)
Plate Mail Metal (Fanatic)
Fur Brown (Fanatic)
Strong Skin Shade
Speedpaint Medium
Barbarian Flesh (Fanatic)
Dorado Flesh (Fanatic)
Aqua Alchemy (Fanatic)
VARNISH:
Instar Varnish+ One-Hour Heroes - Classic Speedpainting RPG Figures [How I Paint Things]](https://i.ytimg.com/vi/Db9VM9Spxvg/mqdefault.jpg)
![No Fuss Black Armour - Simple Raven Guard [How I Paint Things]
Black - like white - still has this weird reputation for being difficult to paint. Nah. Naaah! The trick is that youre not painting a pure black, which leaves you more wiggle room for what you can do to shade and highlight it. Grab a drybrush and get stuck in!
00:00 - Intro
00:41 - Priming Notes
01:53 - Painting the Head
06:52 - Painting the Marine
16:50 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge), Matt White (Army Painter)
ARMY PAINTER:
Peachy Flesh (Speedpaint)
Holy White (Speedpaint)
Matt Black
Deep Grey
Dorado Skin
Quartz Skin
Brainmatter Beige
Matt White
Gun Metal
Dark Tone (Wash)
Nightroot Shade (Wash)
Ash Grey
Dragon Red
Banshee Brown (John Blanche Masterclass)
Dusty Skull
Mulled Berry
Strong Tone
Skeleton Bone
Elder Flower
Pure Red
CITADEL/WARHAMMER:
Corvus Black (Base)
VARNISH:
Matt Varnish Spray (Army Painter)
THE BASE:
Apply a layer of Citadel Stirland Mud (Technical) then heavily drybrush with Ryza Rust (Dry) and lightly with Eldar Flesh (Dry). Add tufts to taste and paint the base rim in AP Oak Brown. No Fuss Black Armour - Simple Raven Guard [How I Paint Things]](https://i.ytimg.com/vi/EEjb9wGo2v0/mqdefault.jpg)
![Marcher: Empires at War - Painting Holy Roman Empire Infantry [How I Paint Things]
One of the great powers of the world in the Marcher: Empires at War setting, the Holy Roman Empire would not, as in reality, be dissolved by Napoleon. With troops defending the Empire from as far afield as the Bohemian city of Prague, theres all manner of ways to paint your infantry and put your own touch on these cracking figures. This colour scheme shows the 21st Landwehr Division as they fought in the Siege of Frankfurt, their shining silver armour painted with spare vehicle paints to dull it down during intense city combat!
Find out more about the Marchers upcoming starter set, as well as pictures of more Holy Roman Empire troops here: https://gamefound.com/en/projects/golden-dragon-games-inc/marcher-empires-at-war-first-edition
Jackson had this to say on the subject of how he painted his own HRE troops: Basecoat Vallejo Panzer yellow spray primer, cloth is Vallejo Field Blue, leather and wood is citadel Catachan Flesh, lenses and collar tabs are Citadel Mephiston Red. Everything is washed with Agrax Earthshade and then dry brushed with Ushabti Bone for a dusty look.
Find out more here: https://www.goldendragongames.net/what-is-marcher
Wargames Atlantic have the Marcher US Army stuff coming soon, too: https://wargamesatlantic.com/blogs/news/preview-marcher-empires-at-war-3-hard-plastic-sets
Check out the (absolutely enormous) Wargames Atlantic range through the following affiliate link, and I net a wee commission off any purchases at no extra cost to you! https://wargamesatlantic.com?ref=sonicsledge
00:00 - Intro
00:56 - Priming Notes
01:46 - Basecoats
08:13 - Shading
09:49 - Highlights & Finishing Touches
16:28 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Panzer Yellow (Vallejo Spray Can)
VALLEJO:
Middlestone
Field Blue
Flat Brown
German Grey
Light Sea Grey
ARMY PAINTER:
Jasper Skin (Fanatic)
Tomb King Tan (Fanatic)
Oak Brown (Fanatic)
Pure Red (Fanatic)
Plate Mail Metal (Fanatic)
Weapon Bronze (Fanatic)
Tourmaline Skin (Fanatic)
Ruby Skin (Fanatic)
Dryad Bark (Fanatic)
Skeleton Bone (Fanatic)
Blood Chalice (Fanatic)
Barren Dune (Fanatic)
Deep Grey (Fanatic)
CITADEL:
Agrax Earthshade (Shade)
Lahmian Medium (Technical) Marcher: Empires at War - Painting Holy Roman Empire Infantry [How I Paint Things]](https://i.ytimg.com/vi/EOvkNPB5xww/mqdefault.jpg)
![Painting Anvil Industrys Dress Uniform Range [How I Paint Things]
Who doesnt love a nice, smart uniform? No matter whether youre putting down rebellion on the stellar colonies of a vast interplanetary empire or striding across the battlefields of a grimdark future, the old saying to dress for success still holds true.
The Kickstarter is live here! https://www.kickstarter.com/projects/anvilindustry/british-space-force-modular-miniatures-for-wargaming?ref=4231tp
Though a slightly older video, this one covers the first time Id used some of the Anvil Industry dress uniform parts to convert and paint Praetorians. The same methods would definitely still work on the refreshed range! https://youtu.be/4fmt-pYMpKw?si=VcqZusmUFa39rZtp
Check out the opening to this older video where I explain and demonstrate how to use Meshmixer to separate shells and remove bits from miniatures that Anvil Industry thoughtfully makes detachable. https://youtu.be/3hq6JWKJVJ0?si=oyhD4mV3PHfSd9C1
00:00 - Intro
01:23 - A Brisk Intro/Review on the Miniatures
03:18 - Priming Notes
03:41 - Basecoats
09:06 - Shading
10:21 - Highlights & Finishing Touches
15:32 - The Finished Officer
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
PAINTS USED:
PRIMERS: Premium Grey (Vallejo Primer Spray)
ARMY PAINTER:
Wyvern Fury (Fanatic)
Jasper Skin (Fanatic)
Brainmatter Beige (Fanatic)
Warped Yellow (Fanatic)
Runic Cobalt (Fanatic)
Ultramarine Blue (Fanatic)
Matt Black (Fanatic)
Gun Metal (Fanatic)
Plate Mail Metal (Fanatic)
Weapon Bronze (Fanatic)
Woodland Camo (Fanatic)
Strong Tone (Fantic Wash)
Speedpaint Medium
Alpha Blue (Fanatic)
Space Dust (Fanatic)
Tourmaline Skin (Fanatic)
Leopard Stone Skin (Fanatic)
Light Tone (Fanatic Wash)
Deep Grey (Fanatic)
Mithril (Fanatic)
True Brass (Fanatic)
Blood Chalice (Fanatic)
Nuclear Sunrise (Speedpaint)
BASE:
Apply a thick layer of Vallejos Brown Earth texture paste, then drybrush with Vallejo Dark Sand. Add tufts to taste - these are Mountain Tufts and Highland Tufts from Army Painter. Done! Painting Anvil Industrys Dress Uniform Range [How I Paint Things]](https://i.ytimg.com/vi/EaP-PPikYxI/mqdefault.jpg)
![Painting 6mm WWII German Infantry - and Basing! [How I Paint Things]
Closing October and then opening November with back-to-back WWII German videos was not necessarily what I had in mind, but timing being what it is...!
Find these guys - as well as both late-war British and American Airborne forces - as part of the Death From Above Kickstarter: https://www.kickstarter.com/projects/ageofadmirals/battleground-1944-death-from-above/
Definitely check out the rest of the Turner Miniature ranges over at MMF: https://www.myminifactory.com/users/henryturner Because holy dooley, there is a LOT to choose from!
00:00 - Intro
00:49 - Brief Review & Priming Notes
02:02 - Pre-Wash
02:35 - Basecoats
08:31 - Shading
09:21 - Basing
12:21 - Highlights
13:30 - The Finished Bases of Infantry
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Ash Grey (Army Painter Spray)
ARMY PAINTER:
Strong Skin Shade (Wash)
Speedpaint Medium
Mid Feld Grau (Historical)
Rifle Brown (Historical)
Tomb King Tan (Fanatic)
Leather Brown (Fanatic)
Strap Grey (Historical)
Dark Feldgrau (Historical)
Camo Sand (Historical)
Gun Metal (Fanatic)
Greedy Gold (Fanatic)
Strong Tone (Wash)
Light Feldgrau (Fanatic)
Ruby Skin (Fanatic)
VARNISH:
Matt Varnish Spray (Army Painter) Painting 6mm WWII German Infantry - and Basing! [How I Paint Things]](https://i.ytimg.com/vi/EcwVPDMab58/mqdefault.jpg)
![Simple Conquistadors - Painting Wargames Atlantics Plastic Kit [How I Paint Things]
Conquistadors were a mixed bunch. Though a few were trained military men, or a handful of Catholic clergy with a head for organization, in the main it was young men without experience looking for a way to distinguish themselves in their home lands or win glory (and riches) in the New World. Mostly Spanish and Portuguese, the Conquistadors explored, conquered, and settled wherever they found anything of worth... little concerned by the heathen natives that might be in their way.
With a range of hats, helmets, and weapons that make them suited not just for the conquests of the New World but conflicts throughout Europe of the 16th Century, the Wargames Atlantic Conquistadors kit is a fantastic box of plastic. Check them out via the following affiliate link, and any purchase made nets me a small percentage at no additional cost to you: https://wargamesatlantic.com/products/conquistadors?ref=sonicsledge Grab some cool toys, support the channel!
00:00 - Intro
00:54 - Priming - In Freezing Temperatures!
01:51 - Basecoats
09:18 - Shading - The Sonic Tonic
11:44 - A Little Clean-Up
12:30 - Finishing Touches
15:11 - The Finished Conquistadors
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Matt White (Army Painter Primer)
ARMY PAINTER:
Topaz Skin (Fanatic)
Urban Buff (Fanatic)
Violent Vermillion (Fanatic)
Forest Faun (Fanatic)
Daemonic Yellow (Fanatic)
Elder Flower (Fanatic)
Pure Red (Fanatic)
Baron Blue (Fanatic)
Command Khaki (Fanatic)
Leather Brown (Fanatic)
Wasteland Clay (Fanatic)
Oak Brown (Fanatic)
Tomb King Tan (Fanatic)
Plate Mail Metal (Fanatic)
Dryad Bark (Fanatic)
Ancient Stone (Fanatic)
Jasper Skin (Fanatic)
Ruby Skin (Fanatic)
VARNISH:
Colour Forge Spray Varnish - Matt
THE BASE:
Put down a layer of PVA and sprinkle liberally with basing sand. Let it dry, then paint with thinned-down Vallejo Flat Brown. Once dry, overbrush liberally with Vallejo Brown Sand, then drybrush with Vallejo Dark Sand. Add dots of PVA and static grass to taste, or use tufts you like.
Marine Juice MkIII/Sonic Tonic:
3 parts Dark Tone (Army Painter Wash)
3 parts Reikland Fleshshade (Citadel Shade)
4 parts Lahmian Medium (Citadel Technical)
...or just mix a bottle of each together and done! Simple Conquistadors - Painting Wargames Atlantics Plastic Kit [How I Paint Things]](https://i.ytimg.com/vi/EupYpHDOOtw/mqdefault.jpg)
![Big Guns in Plastic! Painting the new Bolt Action Pak 40 [How I Paint Things]
No more supergluing yourself to the ceiling while trying to assemble mortars or anti-tank guns... at long last, the big guns arrive in plastic.
This late-war scheme works well with the kit as-is, but with simple hand swaps and some kneeling poses from other plastic kits, youll be easily able to kitbash weapon crews for Fallschirmjaeger, Waffen SS, Deutsches Afrika Korps and more. Im looking forward to seeing whats in store for my Allies as well - plastic Vickers MGs will have me assembling a machine gun battalion...!
Check out the entire Warlord Games range at their website here: https://r.warlordgames.com/aff/?SONICSLEDGEHAMMER Purchases made through this affiliate link net me a small commission at no cost to you!
00:00 - Intro
00:47 - Kit Review
04:38 - Priming Notes
06:31 - Basecoats
12:31 - Cheating Grenadier Camo
15:48 - Back to Basecoats
18:11 - Which Wash Mix?
21:04 - Highlights & Finishing Touches
25:59 - The Finished Gun & Crew
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Premium Grey (Vallejo Spray Primer)
ARMY PAINTER:
Camo Sand (Historical)
Mid Feldgrau (Historical)
Camo Brown (Historical)
Woodland Camo (Fanatic)
Ruddy Umber (Fanatic)
Medium Drab (Historical)
Tomb King Tan (Fanatic)
Bootstrap Brown (Fanatic)
Leather Brown (Fanatic)
Dark Feldgrau (Historical)
Greedy Gold (Fanatic)
Strap Grey (Historical)
Oak Brown (Fanatic)
Pure Red (Fanatic)
Matt White (Fanatic)
Strong Tone (Wash)
Quickshade Wash Medium
Barren Dune (Fanatic)
Light Feldgrau (Historical)
VARNISH: Army Painter Matt Varnish Spray
THE BASE: Working in areas of about a quarter of the base at a time, apply a layer of PVA and then some basing sand. Once the whole base is covered, tip off any remaining excess, and wash the sand in some thinned down Oak Brown (AP). Drybrush heavily first with Brown Sand (Vallejo), then Dark Sand (Vallejo), and apply static grass and tufts to taste. Ive also soaked some clump foliage in thinned PVA and applied it in thick patches and allowed to dry thoroughly. Big Guns in Plastic! Painting the new Bolt Action Pak 40 [How I Paint Things]](https://i.ytimg.com/vi/FI-DPiPz2_g/mqdefault.jpg)