Uploaded December 2025 | Updated November 2026, 17 hours ago
I’ve always wanted to make a batch of miniature versions of these lined vessels. I know making larger versions of pots is difficult, but working on this scale is also a fussy, finicky process, that creates all manner of other issues. First of all, and perhaps the more irritating part of creating these, is simply managing to keep the vase form on the wheel as its trimmed, as with its narrow base there’s really very little holding it in place. The second difficulty is simply scaling every down, the rims have to be finer, as do the lines that are eventually attached and carved, it becomes so fiddly.
As there’s so little material in them a mistake normally results in the complete destruction of a piece, whereas when I’m working on a larger scale there’s normally a bit of wiggle room—space to make an error and to correct it—whereas with these there’s none of that, so a mistake pretty much rights the whole thing off.
I don’t want these pots to dry quickly, that’s what the bucket is all about, as if I were to leave these out in the open, there’s a good chance the attached line would crack. So, in order to dry them safely, I’ll keep them in this airtight bucket for a few days so that they can try out slowly and consistently—yes, I would have used a smaller container but this was all I had on hand in this moment!
#vase #miniature #maker #craft #clay #stoneware #pottery
I’ve always wanted to make a batch of miniature versions of these lined vessels. I know making larger versions of pots is difficult, but working on this scale is also a fussy, finicky process, that creates all manner of other issues. First of all, and perhaps the more irritating part of creating these, is simply managing to keep the vase form on the wheel as its trimmed, as with its narrow base there’s really very little holding it in place. The second difficulty is simply scaling every down, the rims have to be finer, as do the lines that are eventually attached and carved, it becomes so fiddly.
As there’s so little material in them a mistake normally results in the complete destruction of a piece, whereas when I’m working on a larger scale there’s normally a bit of wiggle room—space to make an error and to correct it—whereas with these there’s none of that, so a mistake pretty much rights the whole thing off.
I don’t want these pots to dry quickly, that’s what the bucket is all about, as if I were to leave these out in the open, there’s a good chance the attached line would crack. So, in order to dry them safely, I’ll keep them in this airtight bucket for a few days so that they can try out slowly and consistently—yes, I would have used a smaller container but this was all I had on hand in this moment!
#vase #miniature #maker #craft #clay #stoneware #pottery










