Uploaded November 2026 | Updated November 2026, 1 hour ago
Most of my recent tutorial films have focused on throwing, so I thought it was about time I turned my attention to another part of the making process: trimming.
I've put together five pieces of advice that I think have helped me become a more confident and consistent trimmer over the years. Interestingly, very little of it actually concerns the trimming tools themselves. Instead, it's about developing a better understanding of the pots you're working with, how the way they're thrown influences the trimming, how they're dried and how to judge the amount of material that needs to be removed.
One of the things I've come to appreciate is just how much easier trimming becomes when the pots are thrown evenly in the first place. It sounds obvious, but a little more care at the throwing stage can save an awful lot of time later on.
There are also plenty of smaller considerations that make a difference. Learning to recognise when clay is at the right stage to trim, keeping a vessel stable as you work, and becoming more comfortable taking a pot off the wheel to assess its weight and balance. None of these are particularly revolutionary ideas, but they're the sort of things that gradually become second nature with enough practice.
I think these less obvious aspects of pottery are often overlooked. They're not necessarily the most exciting things to demonstrate, but they're fundamental to developing a better understanding of the craft.
I've tried to gather together five of the things that have made the biggest difference to my own approach, alongside a few additional observations picked up along the way. Hopefully, there's something useful in there, whether you're relatively new to trimming or have been making pots for a little while.
As always, I'd be interested to hear about the little things you've found helpful in your own practice.
⚫️• HOW TO TAP CENTRE: youtu.be/3lBnDWya0r0
⚱️• HOW TO ATTACH POTS TO THE WHEL: youtu.be/mfTZU3lQsLY
📖 • ORDER MY BOOK: geni.us/bymyhands
🏺 • You may also be interested in my 'A Beginner's Guide' series, which you can find here: youtube.com/playlist?list=PL2WJhtTF0eGhQwf8g2LHcom_KrvJpH_JT
Timecodes:
0:00 - Introduction
1:52 - TIP ONE: Handle/feel the pot before you trim it.
2:24 - TIP TWO: Pin the pot down as you trim it.
6:43 - TIP THREE: Make sure the clay is in the right condition.
14:01 - TIP FOUR: Check the wall thickness using thumbtacks.
17:44 - TIP FIVE: Don't be afraid to take the pot off the wheel.
•
Find out much more via the link below!
https://linktr.ee/floriangadsby
•
Get in touch here: floriangadsby.com/contact
Sign up to my newsletter here: floriangadsby.com/newsletter
Most of my recent tutorial films have focused on throwing, so I thought it was about time I turned my attention to another part of the making process: trimming.
I've put together five pieces of advice that I think have helped me become a more confident and consistent trimmer over the years. Interestingly, very little of it actually concerns the trimming tools themselves. Instead, it's about developing a better understanding of the pots you're working with, how the way they're thrown influences the trimming, how they're dried and how to judge the amount of material that needs to be removed.
One of the things I've come to appreciate is just how much easier trimming becomes when the pots are thrown evenly in the first place. It sounds obvious, but a little more care at the throwing stage can save an awful lot of time later on.
There are also plenty of smaller considerations that make a difference. Learning to recognise when clay is at the right stage to trim, keeping a vessel stable as you work, and becoming more comfortable taking a pot off the wheel to assess its weight and balance. None of these are particularly revolutionary ideas, but they're the sort of things that gradually become second nature with enough practice.
I think these less obvious aspects of pottery are often overlooked. They're not necessarily the most exciting things to demonstrate, but they're fundamental to developing a better understanding of the craft.
I've tried to gather together five of the things that have made the biggest difference to my own approach, alongside a few additional observations picked up along the way. Hopefully, there's something useful in there, whether you're relatively new to trimming or have been making pots for a little while.
As always, I'd be interested to hear about the little things you've found helpful in your own practice.
⚫️• HOW TO TAP CENTRE: youtu.be/3lBnDWya0r0
⚱️• HOW TO ATTACH POTS TO THE WHEL: youtu.be/mfTZU3lQsLY
📖 • ORDER MY BOOK: geni.us/bymyhands
🏺 • You may also be interested in my 'A Beginner's Guide' series, which you can find here: youtube.com/playlist?list=PL2WJhtTF0eGhQwf8g2LHcom_KrvJpH_JT
Timecodes:
0:00 - Introduction
1:52 - TIP ONE: Handle/feel the pot before you trim it.
2:24 - TIP TWO: Pin the pot down as you trim it.
6:43 - TIP THREE: Make sure the clay is in the right condition.
14:01 - TIP FOUR: Check the wall thickness using thumbtacks.
17:44 - TIP FIVE: Don't be afraid to take the pot off the wheel.
•
Find out much more via the link below!
https://linktr.ee/floriangadsby
•
Get in touch here: floriangadsby.com/contact
Sign up to my newsletter here: floriangadsby.com/newsletter










