Making a Teapot Is Harder Than It Looks @floriangadsby
Making a Teapot Is Harder Than It Looks  @floriangadsby
Uploaded October 2026 | Updated November 2026, 4 days ago
This week, I'm showing you how to make these tiny teapots with internal lids, or rather, I'm demonstrating my thoughts and approach to creating something I haven't tackled in an awfully long time.

Over the years, I've developed a slightly different style of lid, one that rests upon an indented rim and sits far more proudly above the vessel, whereas these teapots have a lid that nestles onto an internal gallery that's within the rim-section itself.

This alone makes for a far fiddlier and fussy process but I thoroughly enjoyed the challenge and the two teapots created. I'll take through the throwing, trimming, the assembly of spout to body, the handling, biscuit firing, waxing, glazing and finally the reduction firing to 1290ºC, (cone ten), the grinding of the lid and at long last, the pouring test itself.

Sorry for the length of this one... I got a little carried away but I hope it's an honest reflection of just how much work goes into creating something like this. Small but complex, a simple vessel at heart that's full of minute details.

Thanks so much for watching!

How to cone clay: youtu.be/69dMLpXosSk
The spinner tools I use: youtu.be/fBK31iuMOHw

📖 • ORDER MY BOOK: geni.us/bymyhands

🏺 • You may also be interested in my 'A Beginner's Guide' series, which you can find here: youtube.com/playlist?list=PL2WJhtTF0eGhQwf8g2LHcom_KrvJpH_JT

Timecodes:
0:00 - Introduction & drawing
3:49 - Throwing the body
8:44 - Throwing the lids
11:35 - Throwing the spouts
15:21 - Carefully drying the components
17:49 - Trimming the first body
19:49 - Trimming the first lid
28:44 - Attaching the spouts
39:29 - Pulling & joining the handles
51:48 - Biscuit firing the pots
53:09 - Waxing the teapots
55:29 - Glazing the teapots
57:25 - Tidying the glazes surfaces
1:02:59 - Wadding the lids
1:04:40 - Packing & reduction firing the gas kiln
1:06:42 - Unpacking the kiln
1:07:41 - Sanding the bases & polishing the lids with lapping paste
1:12:42 - The pouring test!

•
Find out much more via the link below!
https://linktr.ee/floriangadsby
•
Get in touch here: floriangadsby.com/contact
Sign up to my newsletter here: floriangadsby.com/newsletter
Making a Teapot Is Harder Than It LooksUsing The Sharpest Tools I OwnThe Evolution of the Bowls I Create (Beginning to End)How to Make a Teapot — Beginning to End5 Mistakes Every Pottery Beginner MakesThe Most Monotonous Task When Making PotteryA New Lid Design - What do You Think?Im Addicted to Throwing These...Trimming A Bronze Encrusted Vase12 Hours of Pottery Handle PullingThe Tool I Can’t Work WithoutSuccessful Black Stoneware Bowls—FINALLY!
Florian Gadsby |

Making a Teapot Is Harder Than It Looks

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER