Uploaded August 2020 | Updated September 2026, 7 hours ago
This is a starter project for getting into making Burr Puzzels.
Here is a website that shows the assembly steps:
popularwoodworking.com/projects/wooden-burr-puzzles
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what I used:
Tools
-----
Pencil (amzn.to/2Tu9O63)
Marker (amzn.to/2U2kf56)
Handheld Saw (amzn.to/2TE8tcT)
Tape Measure (amzn.to/3g8y2ND)
Square (amzn.to/2B64ajg)
Chisel (amzn.to/3aAqwtW)
Utility Knife (amzn.to/2TvjpcK)
Wood File (amzn.to/2XNHOhE)
Parts
-----
Square Dowel
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Buddha by Kontekst soundcloud.com/kontekstmusic
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: bit.ly/2Pe7mBN
Music promoted by Audio Library youtu.be/b6jK2t3lcRs
-----
#BurrPuzzle #3PieceBurrPuzzle
This is a starter project for getting into making Burr Puzzels.
Here is a website that shows the assembly steps:
popularwoodworking.com/projects/wooden-burr-puzzles
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what I used:
Tools
-----
Pencil (amzn.to/2Tu9O63)
Marker (amzn.to/2U2kf56)
Handheld Saw (amzn.to/2TE8tcT)
Tape Measure (amzn.to/3g8y2ND)
Square (amzn.to/2B64ajg)
Chisel (amzn.to/3aAqwtW)
Utility Knife (amzn.to/2TvjpcK)
Wood File (amzn.to/2XNHOhE)
Parts
-----
Square Dowel
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Buddha by Kontekst soundcloud.com/kontekstmusic
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: bit.ly/2Pe7mBN
Music promoted by Audio Library youtu.be/b6jK2t3lcRs
-----
#BurrPuzzle #3PieceBurrPuzzle
![Make and Solve a 6 Piece Burr Puzzle | 6 Piece Wooden Puzzle, With Solution
This is a starter project for getting into making Burr Puzzels.
Here is a website that shows the assembly steps:
https://www.popularwoodworking.com/projects/wooden-burr-puzzles/
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Pencil (https://amzn.to/2Tu9O63)
Marker (https://amzn.to/2U2kf56)
Handheld Saw (https://amzn.to/2TE8tcT)
Tape Measure (https://amzn.to/3g8y2ND)
Square (https://amzn.to/2B64ajg)
Chisel (https://amzn.to/3aAqwtW)
Utility Knife (https://amzn.to/2TvjpcK)
Wood File (https://amzn.to/2XNHOhE)
Parts
Square Dowel
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Track: Lost Sky - Dreams [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/SHFTHDncw0g
Free Download / Stream: http://ncs.io/Dreams
Track: Lost Sky - Dreams pt. II (feat. Sara Skinner) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/L7kF4MXXCoA
Free Download / Stream: http://ncs.io/Dreams2
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner
#BurrPuzzle #6PieceBurrPuzzle Make and Solve a 6 Piece Burr Puzzle | 6 Piece Wooden Puzzle, With Solution](https://i.ytimg.com/vi/AKBNYREWBTM/mqdefault.jpg)
![Make a TARDIS Model - Part 6 - The Windows
Ive built a 1/10th scale model of the TARDIS. This is the sixth video of the series, and this time Im making the windows of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos, and check out the playlist to view the entire series!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Drill (https://amzn.to/2LWBoJr)
1/16 Drill Bit (https://amzn.to/2GRxxtb)
Utility Knife (https://amzn.to/2TvjpcK)
Wood File (https://amzn.to/2XNHOhE)
Ruler (https://amzn.to/2GmKE5m)
Pencil (https://amzn.to/2Tu9O63)
Wood Glue (https://amzn.to/2vxzR2n)
Parts
Matches (https://amzn.to/2UjS8dN)
Anti-Glare Plastic (https://amzn.to/2VCwyBw)
Thumb Tacks (https://amzn.to/2TdNYHW)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner Make a TARDIS Model - Part 6 - The Windows](https://i.ytimg.com/vi/APE81o3jh88/mqdefault.jpg)
![Glass Bottle Wind Chime - Part 2 - Success!
I did it! Thanks to comments from some of my viewers, I was able to finish this Glass Bottle Wind Chime that was originally a Failed Experiment.
You can check out the Failed Experiment video here:
➞ https://youtu.be/MOKlX3PdCZE
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Related Videos:
FULL LENGTH BOTTLE CUTTING VIDEO (on my second channel: https://youtu.be/ChmuNzJ7VJY)
Cut Glass Bottles Using a Soldering Iron (https://youtu.be/JF6M9a_bJdo)
Make a Glass Bottle Scoring Jig (https://youtu.be/qRf38Rg-Nlg)
Cut Square and Odd Shaped Glass Bottles (https://youtu.be/_jRNuVxLsfE)
Polish Glass Bottle Edges After Cutting (https://youtu.be/t2sT8SNHvUY)
▽ Here is what I used:
Glass Bottle
Bottle Scoring Jig (https://youtu.be/qRf38Rg-Nlg)
Painters Tape(https://amzn.to/2Q05ZEC)
Sharpie (https://amzn.to/2U2kf56)
Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
Gloves (https://amzn.to/3cHVKzi)
Dremel (https://amzn.to/2VfvXVK)
Diamond Burrs (https://amzn.to/2V72Zu2)
Wire (https://amzn.to/30WI6FA)
Sand Paper:
- Multiple Grit Pack: 60 grit to 2000 grit, 9 x 11 (http://amzn.to/2DlX34n)
- or -
- Multiple Grit Pack: 60 grit to 3000 grit, 3 x 5.5 (https://amzn.to/2tRhKGR)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner
#WindChime #BottleCutting Glass Bottle Wind Chime - Part 2 - Success!](https://i.ytimg.com/vi/BDAc0ZWjVjs/mqdefault.jpg)
![Make a Candle From a Glass Bottle
Today lets make a candle! Its an easy project to make, and you can put your old bottles to use in another creative way.
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-Candle-From-a-Glass-Bottle
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are my previous videos that go more in depth on some of the steps I followed:
Make a Glass Bottle Scoring Jig
(https://youtu.be/qRf38Rg-Nlg)
Cut Glass Bottles Using a Soldering Iron
(https://youtu.be/JF6M9a_bJdo)
Polish Glass Bottle Edges After Cutting
(https://youtu.be/t2sT8SNHvUY)
Or watch my playlist will all of these videos
(https://www.youtube.com/playlist?list=PLCZv3eVnjjDJnYrc57A10OVOxz372pmwp)
▽ Here is what I used:
Tools
Bottle Scoring Jig
Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
Scissors (https://amzn.to/2PPfg1s)
Double Boiler (https://amzn.to/2S89gTb)
Sand Paper:
- Multiple Grit Pack: 60 grit to 2000 grit, 9 x 11 (http://amzn.to/2DlX34n)
- or -
- Multiple Grit Pack: 60 grit to 3000 grit, 3 x 5.5 (https://amzn.to/2tRhKGR)
Parts
Bottle
Tea Light Candle (https://amzn.to/2yukFV3)
Wick (https://amzn.to/2q7G55E)
Wax (https://amzn.to/2Ra8p34)
Crayon (https://amzn.to/2S88V2R)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
DEAF KEV - Invincible [NCS Release]
➞ https://youtu.be/J2X5mJ3HDYE
▽ Follow DEAF KEV:
➞ SoundCloud - https://soundcloud.com/atm-dubstep
➞ Facebook - https://www.facebook.com/ATMDubstep
➞ YouTube - https://www.youtube.com/user/ATMDubstep Make a Candle From a Glass Bottle](https://i.ytimg.com/vi/BGHG3aajfiM/mqdefault.jpg)
![Make a TARDIS Model - Part 5 - The Light
Ive built a 1/10th scale model of the TARDIS. This is the fifth video of the series, and this time Im building the light on the top of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos, and check out the playlist to view the entire series!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Drill (https://amzn.to/2LWBoJr)
1/16 Drill Bit (https://amzn.to/2GRxxtb)
1/4 Brad Point Drill Bit (https://amzn.to/2Eyd1wq)
3/8 Brad Point Drill Bit (https://amzn.to/2Eyd1wq)
3/4 Hole Saw (https://amzn.to/2SmIXra)
Handheld Saw (https://amzn.to/2TE8tcT)
Wood Glue (https://amzn.to/2vxzR2n)
Wood Filler (https://amzn.to/2EjGXvY)
Sand Paper (http://amzn.to/2DlX34n)
Utility Knife (https://amzn.to/2TvjpcK)
Scissors (https://amzn.to/2H0GHDT)
Ruler (https://amzn.to/2GmKE5m)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
3/8 Vinyl Tubing (https://amzn.to/2GYB2ON)
Small Matches (https://amzn.to/2U7OeVj)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ https://youtu.be/yJg-Y5byMMw
▽ Follow Warriyo:
➞ SoundCloud - https://soundcloud.com/warriyo
➞ Facebook - https://www.facebook.com/WarriyoMusic
➞ Twitter - https://twitter.com/warriyo
➞ YouTube - https://www.youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - https://soundcloud.com/laurabrehm
➞ Facebook - https://www.facebook.com/laurabrehmmusic
➞ Twitter - https://twitter.com/laurakbrehm
➞ YouTube - https://www.youtube.com/user/laurabrehm Make a TARDIS Model - Part 5 - The Light](https://i.ytimg.com/vi/EUsgOiAQMB0/mqdefault.jpg)


![Make an Infinity Mirror Clock
I have already made a few infinity mirrors, but they were mostly decorational. The one that I made here is also functional!
My Instructables Link:
➞ https://www.instructables.com/id/Make-an-Infinity-Mirror-Clock/
(Arduino Nano Code is listed there)
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Reference Videos
Make a Colorful Infinity Mirror (https://youtu.be/T-jcIiV6ovI)
Polish Aluminum To Mirror Finish (https://youtu.be/STwX_1VzggQ)
Tools
Straight Edge Ruler (https://amzn.to/2GmKE5m)
Utility Knife (https://amzn.to/2TvjpcK)
Sharpie (https://amzn.to/2U2kf56)
Hand Saw (https://amzn.to/2TE8tcT)
Spring Clamps (https://amzn.to/2GijPAf)
Sanding Block (https://amzn.to/2G9qeOi)
Pencil (https://amzn.to/2Tu9O63)
Soldering Iron (https://amzn.to/2oK9Xrh)
Wire Cutters (https://amzn.to/2CXnZd1)
Wire Strippers (https://amzn.to/2qsRot1)
Dremel (https://amzn.to/2VfvXVK)
Bit #115 (Carving Cylinder, https://amzn.to/2qsRxg3)
Bit #199 (Carving Disk, https://amzn.to/2QwntL0)
Bit #85422 (Grinding Stone, https://amzn.to/2XywVPM)
Bit #EZ406-02 (Metal Cutting Disk, https://amzn.to/2Ymrvq1)
Drill (https://amzn.to/2LWBoJr)
Drill Bit 1/16 (https://amzn.to/2GRxxtb)
Drill Bit 1/8 (https://amzn.to/2LzqIR4)
Drill Bit 3/16 (https://amzn.to/2OngmQN)
Drill Bit 3/8 (https://amzn.to/2QzMzIU)
Square (https://amzn.to/2B64ajg)
Angle Finder (https://amzn.to/2KBHZ9r)
Tin Snips (https://amzn.to/3ectm8V)
Pliers (https://amzn.to/332X22i)
Small File (https://amzn.to/2niY47S)
Philips Screw Driver (https://amzn.to/2KRwI59)
Orbital Sander (https://amzn.to/2lD2JnD)
Polishing Pads (https://amzn.to/2Y7ezYG)
Microfiber Polishing Cloth (https://amzn.to/2lDuYTd)
Nylon Cutting Board (https://amzn.to/34f2yjy)
Parts
2 - 1/4 Square Wood Dowel, 36 Long (https://amzn.to/37WPzUJ)
2 - Aluminum Angle Bar, 1/2x3/4x1/16, 36 Long
6 - Coupling Nut, #10-24 x 3/4
6 - Bolts, #10-24 x 1
1 x 1/2 Wood Board (minimum length 9.5 inches)
1 - Bolt 1/4-20 x 1
60 - Addressible LEDs (https://amzn.to/2wM23yO)
Wire (https://amzn.to/2OnshRK)
LED Wire Connectors (https://amzn.to/2wICn6r)
LED Controller (IR Remote, https://amzn.to/2wICsHh)
LED Controller (Bluetooth, https://amzn.to/2PEaEux)
LED 5v Power Supply (https://amzn.to/2Q61IPx)
Plexiglass (minimum 10.5 x 10.5) (https://amzn.to/2vxB09Q)
Aluminum Sheet Metal (minimum 10.5 x 10.5) (https://amzn.to/2HHzfPe)
One Way Mirror Window Tint, Silver (https://amzn.to/2RVV53t)
-or- (https://amzn.to/35YX5yi)
Threaded Insert 1/4-20 x 13mm (http://amzn.to/2p7ZANd)
Arduino Nano (https://amzn.to/32ZofTl)
2 - Touch Sensors (https://amzn.to/37RPamL)
Barrel Plug (https://amzn.to/2WOLNHL)
Supplies
Painters Tape (https://amzn.to/2Q05ZEC)
Wood Glue (https://amzn.to/2vxzR2n)
60 Grit Sandpaper (http://amzn.to/2DlX34n)
220 Grit Sandpaper (http://amzn.to/2DlX34n)
Lead-Free Solder (https://amzn.to/2GD3asQ)
Lead-Based Solder (https://amzn.to/3BGyXFQ)
Solder Flux (https://amzn.to/2QCyV7Z)
Random Wood Block (150 degree angle)
Epoxy Putty (https://amzn.to/35fkgUn)
Film Spray (https://amzn.to/2qjGgyL)
WD40 (https://amzn.to/2k6XfRE)
Black Duct Tape (https://amzn.to/2KFl0ue)
Chrome Color Paint (https://amzn.to/37ldUVc)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner
#InfinityMirror #DiyClock #Arduino Make an Infinity Mirror Clock](https://i.ytimg.com/vi/GZtmViBg-K4/mqdefault.jpg)

![Make and Solve a 3 Piece Burr Puzzle | Longer Video
This is a starter project for getting into making Burr Puzzels.
Here is a website that shows the assembly steps:
https://www.popularwoodworking.com/projects/wooden-burr-puzzles/
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Pencil (https://amzn.to/2Tu9O63)
Marker (https://amzn.to/2U2kf56)
Handheld Saw (https://amzn.to/2TE8tcT)
Tape Measure (https://amzn.to/3g8y2ND)
Square (https://amzn.to/2B64ajg)
Chisel (https://amzn.to/3aAqwtW)
Utility Knife (https://amzn.to/2TvjpcK)
Parts
Square Dowel
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Phantom Sage - Our Lives Past (feat. Emily Styles) [NCS Release]
➞ https://youtu.be/5-vMcPR7Bws
▽ Follow Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_
#BurrPuzzle #3PieceBurrPuzzle Make and Solve a 3 Piece Burr Puzzle | Longer Video](https://i.ytimg.com/vi/HQ3p4fO4bAE/mqdefault.jpg)
![Make a TARDIS Model - Part 4 - The Roof
Ive built a 1/10th scale model of the TARDIS. This is the forth video of the series, and this time Im building the roof of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos, and check out the playlist to view the entire series!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Utility Knife (https://amzn.to/2TvjpcK)
Wood Glue (https://amzn.to/2vxzR2n)
Wood Filler (https://amzn.to/2EjGXvY)
Ruler (https://amzn.to/2GmKE5m)
Pencil (https://amzn.to/2Tu9O63)
Handheld Saw (https://amzn.to/2TE8tcT)
Sand Paper (http://amzn.to/2yNl8jE)
Sanding Block (https://amzn.to/2G9qeOi)
Square (https://amzn.to/2B64ajg)
Drill (https://amzn.to/2LWBoJr)
1/16 Drill Bit (https://amzn.to/2GRxxtb)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
3/8 (or 10 mm) Square Dowel (https://amzn.to/3bY3ehT)
16 Gauge Wire (https://amzn.to/2XchFY9)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner Make a TARDIS Model - Part 4 - The Roof](https://i.ytimg.com/vi/IGy5j1zYDJU/mqdefault.jpg)