Uploaded June 2020 | Updated September 2026, 8 hours ago
I did it! Thanks to comments from some of my viewers, I was able to finish this Glass Bottle Wind Chime that was originally a Failed Experiment.
You can check out the Failed Experiment video here:
➞ youtu.be/MOKlX3PdCZE
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Related Videos:
FULL LENGTH BOTTLE CUTTING VIDEO (on my second channel: youtu.be/ChmuNzJ7VJY)
Cut Glass Bottles Using a Soldering Iron (youtu.be/JF6M9a_bJdo)
Make a Glass Bottle Scoring Jig (youtu.be/qRf38Rg-Nlg)
Cut Square and Odd Shaped Glass Bottles (youtu.be/_jRNuVxLsfE)
Polish Glass Bottle Edges After Cutting (youtu.be/t2sT8SNHvUY)
-----
▽ Here is what I used:
-----
Glass Bottle
Bottle Scoring Jig (youtu.be/qRf38Rg-Nlg)
Painters Tape(amzn.to/2Q05ZEC)
Sharpie (amzn.to/2U2kf56)
Soldering Iron (amzn.to/2yPdAwS)
-or- (amzn.to/2oK9Xrh)
Gloves (amzn.to/3cHVKzi)
Dremel (amzn.to/2VfvXVK)
Diamond Burrs (amzn.to/2V72Zu2)
Wire (amzn.to/30WI6FA)
Sand Paper:
- Multiple Grit Pack: 60 grit to 2000 grit, 9" x 11" (amzn.to/2DlX34n)
- or -
- Multiple Grit Pack: 60 grit to 3000 grit, 3" x 5.5" (amzn.to/2tRhKGR)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ youtu.be/L7kF4MXXCoA
-----
▽ Follow Lost Sky:
➞ Facebook - facebook.com/lostskydiary
➞ SoundCloud - soundcloud.com/lostskydiary
➞ Instagram - instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - soundcloud.com/saraskinner
➞ Facebook - facebook.com/saraskinnermusic
➞ Twitter - twitter.com/hisaraskinner
-----
#WindChime #BottleCutting
I did it! Thanks to comments from some of my viewers, I was able to finish this Glass Bottle Wind Chime that was originally a Failed Experiment.
You can check out the Failed Experiment video here:
➞ youtu.be/MOKlX3PdCZE
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Related Videos:
FULL LENGTH BOTTLE CUTTING VIDEO (on my second channel: youtu.be/ChmuNzJ7VJY)
Cut Glass Bottles Using a Soldering Iron (youtu.be/JF6M9a_bJdo)
Make a Glass Bottle Scoring Jig (youtu.be/qRf38Rg-Nlg)
Cut Square and Odd Shaped Glass Bottles (youtu.be/_jRNuVxLsfE)
Polish Glass Bottle Edges After Cutting (youtu.be/t2sT8SNHvUY)
-----
▽ Here is what I used:
-----
Glass Bottle
Bottle Scoring Jig (youtu.be/qRf38Rg-Nlg)
Painters Tape(amzn.to/2Q05ZEC)
Sharpie (amzn.to/2U2kf56)
Soldering Iron (amzn.to/2yPdAwS)
-or- (amzn.to/2oK9Xrh)
Gloves (amzn.to/3cHVKzi)
Dremel (amzn.to/2VfvXVK)
Diamond Burrs (amzn.to/2V72Zu2)
Wire (amzn.to/30WI6FA)
Sand Paper:
- Multiple Grit Pack: 60 grit to 2000 grit, 9" x 11" (amzn.to/2DlX34n)
- or -
- Multiple Grit Pack: 60 grit to 3000 grit, 3" x 5.5" (amzn.to/2tRhKGR)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ youtu.be/L7kF4MXXCoA
-----
▽ Follow Lost Sky:
➞ Facebook - facebook.com/lostskydiary
➞ SoundCloud - soundcloud.com/lostskydiary
➞ Instagram - instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - soundcloud.com/saraskinner
➞ Facebook - facebook.com/saraskinnermusic
➞ Twitter - twitter.com/hisaraskinner
-----
#WindChime #BottleCutting
![Make a Candle From a Glass Bottle
Today lets make a candle! Its an easy project to make, and you can put your old bottles to use in another creative way.
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-Candle-From-a-Glass-Bottle
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are my previous videos that go more in depth on some of the steps I followed:
Make a Glass Bottle Scoring Jig
(https://youtu.be/qRf38Rg-Nlg)
Cut Glass Bottles Using a Soldering Iron
(https://youtu.be/JF6M9a_bJdo)
Polish Glass Bottle Edges After Cutting
(https://youtu.be/t2sT8SNHvUY)
Or watch my playlist will all of these videos
(https://www.youtube.com/playlist?list=PLCZv3eVnjjDJnYrc57A10OVOxz372pmwp)
▽ Here is what I used:
Tools
Bottle Scoring Jig
Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
Scissors (https://amzn.to/2PPfg1s)
Double Boiler (https://amzn.to/2S89gTb)
Sand Paper:
- Multiple Grit Pack: 60 grit to 2000 grit, 9 x 11 (http://amzn.to/2DlX34n)
- or -
- Multiple Grit Pack: 60 grit to 3000 grit, 3 x 5.5 (https://amzn.to/2tRhKGR)
Parts
Bottle
Tea Light Candle (https://amzn.to/2yukFV3)
Wick (https://amzn.to/2q7G55E)
Wax (https://amzn.to/2Ra8p34)
Crayon (https://amzn.to/2S88V2R)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
DEAF KEV - Invincible [NCS Release]
➞ https://youtu.be/J2X5mJ3HDYE
▽ Follow DEAF KEV:
➞ SoundCloud - https://soundcloud.com/atm-dubstep
➞ Facebook - https://www.facebook.com/ATMDubstep
➞ YouTube - https://www.youtube.com/user/ATMDubstep Make a Candle From a Glass Bottle](https://i.ytimg.com/vi/BGHG3aajfiM/mqdefault.jpg)
![Make a TARDIS Model - Part 5 - The Light
Ive built a 1/10th scale model of the TARDIS. This is the fifth video of the series, and this time Im building the light on the top of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos, and check out the playlist to view the entire series!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Drill (https://amzn.to/2LWBoJr)
1/16 Drill Bit (https://amzn.to/2GRxxtb)
1/4 Brad Point Drill Bit (https://amzn.to/2Eyd1wq)
3/8 Brad Point Drill Bit (https://amzn.to/2Eyd1wq)
3/4 Hole Saw (https://amzn.to/2SmIXra)
Handheld Saw (https://amzn.to/2TE8tcT)
Wood Glue (https://amzn.to/2vxzR2n)
Wood Filler (https://amzn.to/2EjGXvY)
Sand Paper (http://amzn.to/2DlX34n)
Utility Knife (https://amzn.to/2TvjpcK)
Scissors (https://amzn.to/2H0GHDT)
Ruler (https://amzn.to/2GmKE5m)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
3/8 Vinyl Tubing (https://amzn.to/2GYB2ON)
Small Matches (https://amzn.to/2U7OeVj)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ https://youtu.be/yJg-Y5byMMw
▽ Follow Warriyo:
➞ SoundCloud - https://soundcloud.com/warriyo
➞ Facebook - https://www.facebook.com/WarriyoMusic
➞ Twitter - https://twitter.com/warriyo
➞ YouTube - https://www.youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - https://soundcloud.com/laurabrehm
➞ Facebook - https://www.facebook.com/laurabrehmmusic
➞ Twitter - https://twitter.com/laurakbrehm
➞ YouTube - https://www.youtube.com/user/laurabrehm Make a TARDIS Model - Part 5 - The Light](https://i.ytimg.com/vi/EUsgOiAQMB0/mqdefault.jpg)


![Make an Infinity Mirror Clock
I have already made a few infinity mirrors, but they were mostly decorational. The one that I made here is also functional!
My Instructables Link:
➞ https://www.instructables.com/id/Make-an-Infinity-Mirror-Clock/
(Arduino Nano Code is listed there)
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Reference Videos
Make a Colorful Infinity Mirror (https://youtu.be/T-jcIiV6ovI)
Polish Aluminum To Mirror Finish (https://youtu.be/STwX_1VzggQ)
Tools
Straight Edge Ruler (https://amzn.to/2GmKE5m)
Utility Knife (https://amzn.to/2TvjpcK)
Sharpie (https://amzn.to/2U2kf56)
Hand Saw (https://amzn.to/2TE8tcT)
Spring Clamps (https://amzn.to/2GijPAf)
Sanding Block (https://amzn.to/2G9qeOi)
Pencil (https://amzn.to/2Tu9O63)
Soldering Iron (https://amzn.to/2oK9Xrh)
Wire Cutters (https://amzn.to/2CXnZd1)
Wire Strippers (https://amzn.to/2qsRot1)
Dremel (https://amzn.to/2VfvXVK)
Bit #115 (Carving Cylinder, https://amzn.to/2qsRxg3)
Bit #199 (Carving Disk, https://amzn.to/2QwntL0)
Bit #85422 (Grinding Stone, https://amzn.to/2XywVPM)
Bit #EZ406-02 (Metal Cutting Disk, https://amzn.to/2Ymrvq1)
Drill (https://amzn.to/2LWBoJr)
Drill Bit 1/16 (https://amzn.to/2GRxxtb)
Drill Bit 1/8 (https://amzn.to/2LzqIR4)
Drill Bit 3/16 (https://amzn.to/2OngmQN)
Drill Bit 3/8 (https://amzn.to/2QzMzIU)
Square (https://amzn.to/2B64ajg)
Angle Finder (https://amzn.to/2KBHZ9r)
Tin Snips (https://amzn.to/3ectm8V)
Pliers (https://amzn.to/332X22i)
Small File (https://amzn.to/2niY47S)
Philips Screw Driver (https://amzn.to/2KRwI59)
Orbital Sander (https://amzn.to/2lD2JnD)
Polishing Pads (https://amzn.to/2Y7ezYG)
Microfiber Polishing Cloth (https://amzn.to/2lDuYTd)
Nylon Cutting Board (https://amzn.to/34f2yjy)
Parts
2 - 1/4 Square Wood Dowel, 36 Long (https://amzn.to/37WPzUJ)
2 - Aluminum Angle Bar, 1/2x3/4x1/16, 36 Long
6 - Coupling Nut, #10-24 x 3/4
6 - Bolts, #10-24 x 1
1 x 1/2 Wood Board (minimum length 9.5 inches)
1 - Bolt 1/4-20 x 1
60 - Addressible LEDs (https://amzn.to/2wM23yO)
Wire (https://amzn.to/2OnshRK)
LED Wire Connectors (https://amzn.to/2wICn6r)
LED Controller (IR Remote, https://amzn.to/2wICsHh)
LED Controller (Bluetooth, https://amzn.to/2PEaEux)
LED 5v Power Supply (https://amzn.to/2Q61IPx)
Plexiglass (minimum 10.5 x 10.5) (https://amzn.to/2vxB09Q)
Aluminum Sheet Metal (minimum 10.5 x 10.5) (https://amzn.to/2HHzfPe)
One Way Mirror Window Tint, Silver (https://amzn.to/2RVV53t)
-or- (https://amzn.to/35YX5yi)
Threaded Insert 1/4-20 x 13mm (http://amzn.to/2p7ZANd)
Arduino Nano (https://amzn.to/32ZofTl)
2 - Touch Sensors (https://amzn.to/37RPamL)
Barrel Plug (https://amzn.to/2WOLNHL)
Supplies
Painters Tape (https://amzn.to/2Q05ZEC)
Wood Glue (https://amzn.to/2vxzR2n)
60 Grit Sandpaper (http://amzn.to/2DlX34n)
220 Grit Sandpaper (http://amzn.to/2DlX34n)
Lead-Free Solder (https://amzn.to/2GD3asQ)
Lead-Based Solder (https://amzn.to/3BGyXFQ)
Solder Flux (https://amzn.to/2QCyV7Z)
Random Wood Block (150 degree angle)
Epoxy Putty (https://amzn.to/35fkgUn)
Film Spray (https://amzn.to/2qjGgyL)
WD40 (https://amzn.to/2k6XfRE)
Black Duct Tape (https://amzn.to/2KFl0ue)
Chrome Color Paint (https://amzn.to/37ldUVc)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner
#InfinityMirror #DiyClock #Arduino Make an Infinity Mirror Clock](https://i.ytimg.com/vi/GZtmViBg-K4/mqdefault.jpg)

![Make and Solve a 3 Piece Burr Puzzle | Longer Video
This is a starter project for getting into making Burr Puzzels.
Here is a website that shows the assembly steps:
https://www.popularwoodworking.com/projects/wooden-burr-puzzles/
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Pencil (https://amzn.to/2Tu9O63)
Marker (https://amzn.to/2U2kf56)
Handheld Saw (https://amzn.to/2TE8tcT)
Tape Measure (https://amzn.to/3g8y2ND)
Square (https://amzn.to/2B64ajg)
Chisel (https://amzn.to/3aAqwtW)
Utility Knife (https://amzn.to/2TvjpcK)
Parts
Square Dowel
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Phantom Sage - Our Lives Past (feat. Emily Styles) [NCS Release]
➞ https://youtu.be/5-vMcPR7Bws
▽ Follow Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_
#BurrPuzzle #3PieceBurrPuzzle Make and Solve a 3 Piece Burr Puzzle | Longer Video](https://i.ytimg.com/vi/HQ3p4fO4bAE/mqdefault.jpg)
![Make a TARDIS Model - Part 4 - The Roof
Ive built a 1/10th scale model of the TARDIS. This is the forth video of the series, and this time Im building the roof of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos, and check out the playlist to view the entire series!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Utility Knife (https://amzn.to/2TvjpcK)
Wood Glue (https://amzn.to/2vxzR2n)
Wood Filler (https://amzn.to/2EjGXvY)
Ruler (https://amzn.to/2GmKE5m)
Pencil (https://amzn.to/2Tu9O63)
Handheld Saw (https://amzn.to/2TE8tcT)
Sand Paper (http://amzn.to/2yNl8jE)
Sanding Block (https://amzn.to/2G9qeOi)
Square (https://amzn.to/2B64ajg)
Drill (https://amzn.to/2LWBoJr)
1/16 Drill Bit (https://amzn.to/2GRxxtb)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
3/8 (or 10 mm) Square Dowel (https://amzn.to/3bY3ehT)
16 Gauge Wire (https://amzn.to/2XchFY9)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner Make a TARDIS Model - Part 4 - The Roof](https://i.ytimg.com/vi/IGy5j1zYDJU/mqdefault.jpg)
![Cut Glass Bottles Using a Soldering Iron
I got tired of trying to cut bottles using the popular hot/cold water method, only to end up with a jagged cut. So I searched and searched, then found another way! This technique does take a lot longer, but it also gives you more control of where the bottle cuts.
My Instructables Link:
➞ https://www.instructables.com/id/Bottle-Cutting-With-a-Soldering-Iron
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what you will need:
A bottle to cut
A bottle scoring jig (https://youtu.be/qRf38Rg-Nlg)
A Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
This link is the video that taught me this method. After a lot of experimenting, I modified the technique a little. One major thing to note, just use the tip of the soldering iron. DONT use the thicker parts (heats too much area and can cause random cracks):
➞ https://youtu.be/vZEE3tyDdoo
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
➞ https://youtu.be/qRf38Rg-Nlg
Cut Square and Odd Shaped Glass Bottles
➞ https://youtu.be/_jRNuVxLsfE
Cut a Hole In a Glass Bottle (Using a Soldering Iron)
➞ https://youtu.be/Ny8OXoux-U4
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Ash OConnor - You [NCS Release]
➞ https://youtu.be/TbDyQuMJ5QI
Ash OConnor & Curbi - Steeper [NCS Release]
➞ https://youtu.be/UhVbNDEDc1k
▽ Follow Ash O’Connor:
➞ SoundCloud - https://soundcloud.com/ashoconnor
➞ Facebook - https://www.facebook.com/ashoconnor.official
➞ Twitter - https://twitter.com/ashoconnormusic
▽ Follow Curbi:
➞ Facebook https://www.facebook.com/CurbiOfficial
➞ SoundCloud https://soundcloud.com/curbiofficial
➞ Twitter https://twitter.com/CurbiOfficial
➞ YouTube https://www.youtube.com/user/DJCURW3N
➞ Instagram http://instagram.com/itscurbi Cut Glass Bottles Using a Soldering Iron](https://i.ytimg.com/vi/JF6M9a_bJdo/mqdefault.jpg)
![Spiral Cut a Glass Bottle | Making a Glass Spring (1000+ Subscriber Special)
Ive reached the 1000 subscriber mark with my channel! I mainly just talk about my channel, and how this video made by Dan Rojas taught me the technique that I use: https://youtu.be/vZEE3tyDdoo
This is just the start of what I have planned. Hopefully Ill be able to work on all the projects that I want to start!
My Instructables Link:
➞ https://www.instructables.com/id/Spiral-Cut-a-Glass-Bottle-Making-a-Glass-Spring
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
➞ https://youtu.be/qRf38Rg-Nlg
Cutting Glass Bottles Using a Soldering Iron
➞ https://youtu.be/JF6M9a_bJdo
Cut Square and Odd Shaped Glass Bottles
➞ https://youtu.be/_jRNuVxLsfE
Cut a Hole In a Glass Bottle (Using a Soldering Iron)
➞ https://youtu.be/Ny8OXoux-U4
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Jim Yosef - Firefly [NCS Release]
https://youtu.be/x_OwcYTNbHs
▽ Follow Jim Yosef
➞ SoundCloud - https://soundcloud.com/jim-yosef
➞ Facebook - https://www.facebook.com/jimyosefmusic
➞ YouTube - https://www.youtube.com/user/Jimboows Spiral Cut a Glass Bottle | Making a Glass Spring (1000+ Subscriber Special)](https://i.ytimg.com/vi/K2ABCNFXGWI/mqdefault.jpg)
![Recommended Tools For Basic Soldering | Soldering Basics | Soldering for Beginners
This is the second video for a 3 part sub-series that Im adding to my Soldering Basics video series. This sub-series is about Tools and Supplies for Basic Soldering. This soldering series is a great way to learn soldering for beginners. In this video Im showing some tools that I would recommend having for basic soldering, and it should help you with setting up a good soldering kit for beginners.
If you would like text instructions, check out my Instructables Link:
➞ https://www.instructables.com/Recommended-Tools-for-Basic-Soldering/
Tools and Supplies for Basic Soldering Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDJJqXvPgdSEpLdL40EAH7A3
My Soldering Basics Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDKo0G9AIOA48qtfylxDc9d9
My Second YouTube Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are some options:
Helping Hands
Basic Helping Hands (https://amzn.to/3WH5DEl)
4 Hands (https://amzn.to/3jQwUWF)
6 Hands with Lens (https://amzn.to/3VR4GbC)
With Light and Lens (https://amzn.to/3Qa6ivN)
With Extra Options (https://amzn.to/3Qefyiz)
Soldering Station (https://amzn.to/3GC8RU0)
Soldering Iron Tips
10 Tip Set (https://amzn.to/3WGP8IH)
17 Tip Set (https://amzn.to/3Z60ZkV)
Wire Cutters
Regular (https://amzn.to/3XkQqJl)
Flush-Cut, Small (https://amzn.to/3GDhaiD)
Flush-Cut, Big (https://amzn.to/3X6lo7R)
With Built In Strippers (https://amzn.to/3IqaTIe)
Wire Strippers
With Built In Cutters(https://amzn.to/3IqaTIe)
Auto-Adjusting (https://amzn.to/3ibERVK)
Auto-Adjusting (https://amzn.to/3VCxVi4)
Desoldering Pump
Basic (https://amzn.to/2GjwSTH)
Electric (https://amzn.to/3GhjRVo)
Soldering Station With Vacuum Pump (https://amzn.to/3GhkUEW)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Phantom Sage - Our Lives Past (feat. Emily Styles) [NCS Release]
➞ https://youtu.be/5-vMcPR7Bws
▽ Follow Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_
#SolderingBasics #BasicSolderingTools #BasicSolderingSupplies Recommended Tools For Basic Soldering | Soldering Basics | Soldering for Beginners](https://i.ytimg.com/vi/L7KSPx8J3gs/mqdefault.jpg)