Uploaded March 2017 | Updated September 2026, 5 hours ago
I got tired of trying to cut bottles using the popular hot/cold water method, only to end up with a jagged cut. So I searched and searched, then found another way! This technique does take a lot longer, but it also gives you more control of where the bottle cuts.
My Instructables Link:
➞ instructables.com/id/Bottle-Cutting-With-a-Soldering-Iron
My Second Channel:
➞ youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what you will need:
--------------------------------
A bottle to cut
A bottle scoring jig (youtu.be/qRf38Rg-Nlg)
A Soldering Iron (amzn.to/2yPdAwS)
-or- (amzn.to/2oK9Xrh)
This link is the video that taught me this method. After a lot of experimenting, I modified the technique a little. One major thing to note, just use the tip of the soldering iron. DON'T use the thicker parts (heats too much area and can cause random cracks):
➞ youtu.be/vZEE3tyDdoo
-----
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
➞ youtu.be/qRf38Rg-Nlg
Cut Square and Odd Shaped Glass Bottles
➞ youtu.be/_jRNuVxLsfE
Cut a Hole In a Glass Bottle (Using a Soldering Iron)
➞ youtu.be/Ny8OXoux-U4
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Ash O'Connor - You [NCS Release]
➞ youtu.be/TbDyQuMJ5QI
Ash O'Connor & Curbi - Steeper [NCS Release]
➞ youtu.be/UhVbNDEDc1k
-----
▽ Follow Ash O’Connor:
➞ SoundCloud - soundcloud.com/ashoconnor
➞ Facebook - facebook.com/ashoconnor.official
➞ Twitter - twitter.com/ashoconnormusic
▽ Follow Curbi:
➞ Facebook facebook.com/CurbiOfficial
➞ SoundCloud soundcloud.com/curbiofficial
➞ Twitter twitter.com/CurbiOfficial
➞ YouTube youtube.com/user/DJCURW3N
➞ Instagram instagram.com/itscurbi
I got tired of trying to cut bottles using the popular hot/cold water method, only to end up with a jagged cut. So I searched and searched, then found another way! This technique does take a lot longer, but it also gives you more control of where the bottle cuts.
My Instructables Link:
➞ instructables.com/id/Bottle-Cutting-With-a-Soldering-Iron
My Second Channel:
➞ youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what you will need:
--------------------------------
A bottle to cut
A bottle scoring jig (youtu.be/qRf38Rg-Nlg)
A Soldering Iron (amzn.to/2yPdAwS)
-or- (amzn.to/2oK9Xrh)
This link is the video that taught me this method. After a lot of experimenting, I modified the technique a little. One major thing to note, just use the tip of the soldering iron. DON'T use the thicker parts (heats too much area and can cause random cracks):
➞ youtu.be/vZEE3tyDdoo
-----
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
➞ youtu.be/qRf38Rg-Nlg
Cut Square and Odd Shaped Glass Bottles
➞ youtu.be/_jRNuVxLsfE
Cut a Hole In a Glass Bottle (Using a Soldering Iron)
➞ youtu.be/Ny8OXoux-U4
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Ash O'Connor - You [NCS Release]
➞ youtu.be/TbDyQuMJ5QI
Ash O'Connor & Curbi - Steeper [NCS Release]
➞ youtu.be/UhVbNDEDc1k
-----
▽ Follow Ash O’Connor:
➞ SoundCloud - soundcloud.com/ashoconnor
➞ Facebook - facebook.com/ashoconnor.official
➞ Twitter - twitter.com/ashoconnormusic
▽ Follow Curbi:
➞ Facebook facebook.com/CurbiOfficial
➞ SoundCloud soundcloud.com/curbiofficial
➞ Twitter twitter.com/CurbiOfficial
➞ YouTube youtube.com/user/DJCURW3N
➞ Instagram instagram.com/itscurbi
![Spiral Cut a Glass Bottle | Making a Glass Spring (1000+ Subscriber Special)
Ive reached the 1000 subscriber mark with my channel! I mainly just talk about my channel, and how this video made by Dan Rojas taught me the technique that I use: https://youtu.be/vZEE3tyDdoo
This is just the start of what I have planned. Hopefully Ill be able to work on all the projects that I want to start!
My Instructables Link:
➞ https://www.instructables.com/id/Spiral-Cut-a-Glass-Bottle-Making-a-Glass-Spring
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
➞ https://youtu.be/qRf38Rg-Nlg
Cutting Glass Bottles Using a Soldering Iron
➞ https://youtu.be/JF6M9a_bJdo
Cut Square and Odd Shaped Glass Bottles
➞ https://youtu.be/_jRNuVxLsfE
Cut a Hole In a Glass Bottle (Using a Soldering Iron)
➞ https://youtu.be/Ny8OXoux-U4
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Jim Yosef - Firefly [NCS Release]
https://youtu.be/x_OwcYTNbHs
▽ Follow Jim Yosef
➞ SoundCloud - https://soundcloud.com/jim-yosef
➞ Facebook - https://www.facebook.com/jimyosefmusic
➞ YouTube - https://www.youtube.com/user/Jimboows Spiral Cut a Glass Bottle | Making a Glass Spring (1000+ Subscriber Special)](https://i.ytimg.com/vi/K2ABCNFXGWI/mqdefault.jpg)
![Recommended Tools For Basic Soldering | Soldering Basics | Soldering for Beginners
This is the second video for a 3 part sub-series that Im adding to my Soldering Basics video series. This sub-series is about Tools and Supplies for Basic Soldering. This soldering series is a great way to learn soldering for beginners. In this video Im showing some tools that I would recommend having for basic soldering, and it should help you with setting up a good soldering kit for beginners.
If you would like text instructions, check out my Instructables Link:
➞ https://www.instructables.com/Recommended-Tools-for-Basic-Soldering/
Tools and Supplies for Basic Soldering Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDJJqXvPgdSEpLdL40EAH7A3
My Soldering Basics Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDKo0G9AIOA48qtfylxDc9d9
My Second YouTube Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are some options:
Helping Hands
Basic Helping Hands (https://amzn.to/3WH5DEl)
4 Hands (https://amzn.to/3jQwUWF)
6 Hands with Lens (https://amzn.to/3VR4GbC)
With Light and Lens (https://amzn.to/3Qa6ivN)
With Extra Options (https://amzn.to/3Qefyiz)
Soldering Station (https://amzn.to/3GC8RU0)
Soldering Iron Tips
10 Tip Set (https://amzn.to/3WGP8IH)
17 Tip Set (https://amzn.to/3Z60ZkV)
Wire Cutters
Regular (https://amzn.to/3XkQqJl)
Flush-Cut, Small (https://amzn.to/3GDhaiD)
Flush-Cut, Big (https://amzn.to/3X6lo7R)
With Built In Strippers (https://amzn.to/3IqaTIe)
Wire Strippers
With Built In Cutters(https://amzn.to/3IqaTIe)
Auto-Adjusting (https://amzn.to/3ibERVK)
Auto-Adjusting (https://amzn.to/3VCxVi4)
Desoldering Pump
Basic (https://amzn.to/2GjwSTH)
Electric (https://amzn.to/3GhjRVo)
Soldering Station With Vacuum Pump (https://amzn.to/3GhkUEW)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Phantom Sage - Our Lives Past (feat. Emily Styles) [NCS Release]
➞ https://youtu.be/5-vMcPR7Bws
▽ Follow Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_
#SolderingBasics #BasicSolderingTools #BasicSolderingSupplies Recommended Tools For Basic Soldering | Soldering Basics | Soldering for Beginners](https://i.ytimg.com/vi/L7KSPx8J3gs/mqdefault.jpg)

![How Infinity Mirrors Work - With Experiments
This video has a simple explanation of how infinity mirrors work. I also try a few things out to see some things that do and do not work.
My Instructables Link:
➞ https://www.instructables.com/id/How-Infinity-Mirrors-Work-With-Experiments
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Parts
My 2-sided, Desktop Infinity Mirror
(https://youtu.be/tkZN4qPhjJ4)
A Picture Float Frame (8x8 with 2 Panes of Glass)
(https://amzn.to/2JZh462)
One Way Mirror Window Tint, Silver
(https://amzn.to/2RVV53t)
-or- (https://amzn.to/35YX5yi)
LED Strip
(https://amzn.to/2Msae9q)
Barrel Plugs
(https://amzn.to/2WOLNHL)
12vdc Power Supply
(https://amzn.to/2MeWXEj)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Unknown Brain x Rival - Control (feat. Jex) [NCS Release]
➞ https://youtu.be/bLZHcnuqscU
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ https://youtu.be/yJg-Y5byMMw
▽ Follow Unknown Brain:
➞ SoundCloud - http://soundcloud.com/UnknownBrain
➞ Facebook - http://facebook.com/UnknownBrain
➞ Twitter - http://twitter.com/UnknownBrain_
➞ Instagram - https://www.instagram.com/unknown_brain/
▽ Follow Rival:
➞ SoundCloud - http://soundcloud.com/rival_official
➞ Facebook - http://facebook.com/sounds.rival/
➞ Twitter - http://twitter.com/rivaltweet
➞ Instagram - https://www.instagram.com/rival_music/
▽ Follow Jex:
➞ SoundCloud - https://soundcloud.com/jordanmillermusic-1
➞ Instagram - https://www.instagram.com/jexjordyn/
➞ Facebook - https://www.facebook.com/jexjordyn/
➞ Twitter - https://twitter.com/jexjordyn
▽ Follow Warriyo:
➞ SoundCloud - https://soundcloud.com/warriyo
➞ Facebook - https://www.facebook.com/WarriyoMusic
➞ Twitter - https://twitter.com/warriyo
➞ YouTube - https://www.youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - https://soundcloud.com/laurabrehm
➞ Facebook - https://www.facebook.com/laurabrehmmusic
➞ Twitter - https://twitter.com/laurakbrehm
➞ YouTube - https://www.youtube.com/user/laurabrehm
#InfinityMirror How Infinity Mirrors Work - With Experiments](https://i.ytimg.com/vi/LjWMxUitOHo/mqdefault.jpg)
![Glass Bottle Wind Chime - Part 1 - Failed Experiment (Ep. 5)
I tried to make a wind chime out of a glass bottle. Although I was able to cut it the way I wanted to, there was another issue that came up. Any advice to overcome this obstacle would be appreciated!
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Related Videos:
FULL LENGTH BOTTLE CUTTING VIDEO (on my second channel: https://youtu.be/ChmuNzJ7VJY)
Cut Glass Bottles Using a Soldering Iron (https://youtu.be/JF6M9a_bJdo)
Make a Glass Bottle Scoring Jig (https://youtu.be/qRf38Rg-Nlg)
Cut Square and Odd Shaped Glass Bottles (https://youtu.be/_jRNuVxLsfE)
Polish Glass Bottle Edges After Cutting (https://youtu.be/t2sT8SNHvUY)
▽ Here is what I used:
Glass Bottle
Bottle Scoring Jig (https://youtu.be/qRf38Rg-Nlg)
Painters Tape(https://amzn.to/2Q05ZEC)
Sharpie (https://amzn.to/2U2kf56)
Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
Gloves (https://amzn.to/3cHVKzi)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner
#WindChime #BottleCutting #FailedExperiment Glass Bottle Wind Chime - Part 1 - Failed Experiment (Ep. 5)](https://i.ytimg.com/vi/MOKlX3PdCZE/mqdefault.jpg)

![Cut a Hole In a Glass Bottle (Using a Soldering Iron)
Basic cuts are easy, now try making more advanced cuts!
My Instructables Link:
➞ https://www.instructables.com/id/Cut-a-Hole-in-a-Bottle-Using-a-Soldering-Iron
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what you will need:
A bottle to cut
A bottle scoring jig (https://youtu.be/qRf38Rg-Nlg)
A soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
▽ My Other Videos Related to This One:
Making My Bottle Cutting Jig
https://youtu.be/qRf38Rg-Nlg
Cutting Glass Bottles Using a Soldering Iron
https://youtu.be/JF6M9a_bJdo
Cut Square and Odd Shaped Glass Bottles
https://youtu.be/_jRNuVxLsfE
Spiral Cut a Glass Bottle - Making a Glass Spring
https://youtu.be/K2ABCNFXGWI
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Electro-Light - Symbolism [NCS Release]
➞ https://youtu.be/ CRWE-L45k
▽ Follow Electro-Light:
➞ Facebook - https://www.facebook.com/ElectroLightOfficial
➞ SoundCloud - https://soundcloud.com/maskedacoustic
➞ Twitter - https://twitter.com/ElectroLightEDM
➞ YouTube - https://www.youtube.com/user/ElectroLightOfficial Cut a Hole In a Glass Bottle (Using a Soldering Iron)](https://i.ytimg.com/vi/Ny8OXoux-U4/mqdefault.jpg)
![Using Flux | Soldering Basics | Soldering for Beginners
In this video Im go over the basics of using flux and why its helpful. This video is part of series Im making about Basic Soldering. This soldering series is a great way to learn soldering for beginners.
My Soldering Basics Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDKo0G9AIOA48qtfylxDc9d9
Tools and Supplies for Basic Soldering Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDJJqXvPgdSEpLdL40EAH7A3
My Second YouTube Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
▽ My Filming Equipment:
Camera: https://amzn.to/3RBQCmc
Macro Lens: https://amzn.to/48glW0W
Tripod: https://amzn.to/3NKiB1Q
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools & Supplies
Soldering Iron (https://amzn.to/2oK9Xrh)
Helping Hands (https://amzn.to/2HtGc7w)
22 gauge Wire (https://amzn.to/3n7oiYO)
Lead-Free Solder (https://amzn.to/2GD3asQ)
Lead-Based Solder (https://amzn.to/3BGyXFQ)
Flux (https://amzn.to/2So78rA)
Isopropyl Alcohol
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
#SolderingBasics #Flux #SolderFlux Using Flux | Soldering Basics | Soldering for Beginners](https://i.ytimg.com/vi/OWNAjwhwzro/mqdefault.jpg)
![How to Build a Raised Garden Bed
Its springtime and ready to plant a garden. I just needed a place to plant my vegetables, so I built a raised garden bed. I forgot to mention in the video, but all of the wood I used is cedar.
My Instructables Link (printable instructions):
➞ https://www.instructables.com/id/Build-a-Raised-Garden-Bed
My Second Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Safety Equipment
Safety Glasses (https://amzn.to/39N7fDt)
Ear Plugs (https://amzn.to/2XcMxKD)
Dust Mask (https://amzn.to/34oPHwt)
Tools
Tape Measure (https://amzn.to/2V3UoYa)
Pencil (https://amzn.to/2Tu9O63)
Square (https://amzn.to/2B64ajg)
Circular Saw (https://amzn.to/3dXtlWW)
Impact Driver (https://amzn.to/2xUydeR)
Bit for the Screws (it came with the screws)
Parts
Cedar Boards for Part 1:
7 - 1x8 (3/4 x 7 1/4)
4 - 2x4 (1 1/2 x 3 1/2)
Cedar Boards for Part 2:
2 - 2x4 (1 1/2 x 3 1/2)
4 - 1x4 (3/4 x 3 1/2)
18 - 1x2 (3/4 x 1 1/2)
Deck Screws:
1 Lb. 2 (https://amzn.to/3eoH2P8)
1 Lb. 1 1/4 (https://amzn.to/2y6Dh04)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Track: Diviners - Stockholm Lights [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/_Bs2dUtjDSI
Free Download / Stream: http://ncs.io/StockholmLights
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ https://youtu.be/yJg-Y5byMMw
▽ Follow Warriyo:
➞ SoundCloud - https://soundcloud.com/warriyo
➞ Facebook - https://www.facebook.com/WarriyoMusic
➞ Twitter - https://twitter.com/warriyo
➞ YouTube - https://www.youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - https://soundcloud.com/laurabrehm
➞ Facebook - https://www.facebook.com/laurabrehmmusic
➞ Twitter - https://twitter.com/laurakbrehm
➞ YouTube - https://www.youtube.com/user/laurabrehm
#RaisedGardenBed #RaisedGarden #GardenBed How to Build a Raised Garden Bed](https://i.ytimg.com/vi/PFnF7CsTxwU/mqdefault.jpg)
![Make a TARDIS Model - Part 2 - The Sides
Ive built a 1/10th scale model of the TARDIS. This is the second video of the series, and this time Im building 3 of the sides of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Utility Knife (https://amzn.to/2TvjpcK)
Ruler (https://amzn.to/2GmKE5m)
Pencil (https://amzn.to/2Tu9O63)
Wood Glue (https://amzn.to/2vxzR2n)
1 Spring Clamps (https://amzn.to/2GijPAf)
2 Spring Clamps (https://amzn.to/2MVxttC)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner Make a TARDIS Model - Part 2 - The Sides](https://i.ytimg.com/vi/R-eaKlxDcbg/mqdefault.jpg)
